Library {
  Name			  "ltpda_library_mrh"
  Version		  7.0
  MdlSubVersion		  0
  SavedCharacterEncoding  "windows-1252"
  LibraryType		  "BlockLibrary"
  SaveDefaultBlockParams  on
  SampleTimeColors	  off
  LibraryLinkDisplay	  "none"
  WideLines		  off
  ShowLineDimensions	  off
  ShowPortDataTypes	  off
  ShowLoopsOnError	  on
  IgnoreBidirectionalLines off
  ShowStorageClass	  off
  ShowTestPointIcons	  on
  ShowViewerIcons	  on
  SortedOrder		  off
  ExecutionContextIcon	  off
  ShowLinearizationAnnotations on
  ScopeRefreshTime	  0.035000
  OverrideScopeRefreshTime on
  DisableAllScopes	  off
  BlockNameDataTip	  off
  BlockParametersDataTip  off
  BlockDescriptionStringDataTip	off
  ToolBar		  on
  StatusBar		  on
  BrowserShowLibraryLinks off
  BrowserLookUnderMasks	  off
  Created		  "Thu Feb 14 14:06:07 2008"
  Creator		  "Martin Hewitson"
  UpdateHistory		  "UpdateHistoryNever"
  ModifiedByFormat	  "%<Auto>"
  LastModifiedBy	  "Martin Hewitson"
  ModifiedDateFormat	  "%<Auto>"
  LastModifiedDate	  "Tue Feb 19 14:31:59 2008"
  RTWModifiedTimeStamp	  0
  ModelVersionFormat	  "1.%<AutoIncrement:78>"
  ConfigurationManager	  "None"
  SimulationMode	  "normal"
  LinearizationMsg	  "none"
  Profile		  off
  ParamWorkspaceSource	  "MATLABWorkspace"
  CovSaveName		  "covdata"
  CovMetricSettings	  "dw"
  CovNameIncrementing	  off
  CovHtmlReporting	  on
  covSaveCumulativeToWorkspaceVar on
  CovSaveSingleToWorkspaceVar on
  CovCumulativeReport	  off
  CovReportOnPause	  on
  ExtModeBatchMode	  off
  ExtModeEnableFloating	  on
  ExtModeTrigType	  "manual"
  ExtModeTrigMode	  "normal"
  ExtModeTrigPort	  "1"
  ExtModeTrigElement	  "any"
  ExtModeTrigDuration	  1000
  ExtModeTrigDurationFloating "auto"
  ExtModeTrigHoldOff	  0
  ExtModeTrigDelay	  0
  ExtModeTrigDirection	  "rising"
  ExtModeTrigLevel	  0
  ExtModeArchiveMode	  "off"
  ExtModeAutoIncOneShot	  off
  ExtModeIncDirWhenArm	  off
  ExtModeAddSuffixToVar	  off
  ExtModeWriteAllDataToWs off
  ExtModeArmWhenConnect	  on
  ExtModeSkipDownloadWhenConnect off
  ExtModeLogAll		  on
  ExtModeAutoUpdateStatusClock on
  ShowModelReferenceBlockVersion off
  ShowModelReferenceBlockIO off
  BlockDefaults {
    Orientation		    "right"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    NamePlacement	    "normal"
    FontName		    "Arial"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    ShowName		    on
  }
  BlockParameterDefaults {
    Block {
      BlockType		      Inport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      OutMin		      "[]"
      OutMax		      "[]"
      DataType		      "auto"
      OutDataType	      "fixdt(1,16,0)"
      OutScaling	      "[]"
      SignalType	      "auto"
      SamplingMode	      "auto"
      LatchByDelayingOutsideSignal off
      LatchByCopyingInsideSignal off
      Interpolate	      on
    }
    Block {
      BlockType		      "M-S-Function"
      FunctionName	      "mlfile"
      DisplayMFileStacktrace  on
    }
    Block {
      BlockType		      Mux
      Inputs		      "4"
      DisplayOption	      "none"
      UseBusObject	      off
      BusObject		      "BusObject"
      NonVirtualBus	      off
    }
    Block {
      BlockType		      Outport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      OutMin		      "[]"
      OutMax		      "[]"
      DataType		      "auto"
      OutDataType	      "fixdt(1,16,0)"
      OutScaling	      "[]"
      SignalType	      "auto"
      SamplingMode	      "auto"
      OutputWhenDisabled      "held"
      InitialOutput	      "[]"
    }
    Block {
      BlockType		      Reference
    }
    Block {
      BlockType		      SubSystem
      ShowPortLabels	      "FromPortIcon"
      Permissions	      "ReadWrite"
      PermitHierarchicalResolution "All"
      TreatAsAtomicUnit	      off
      SystemSampleTime	      "-1"
      RTWFcnNameOpts	      "Auto"
      RTWFileNameOpts	      "Auto"
      RTWMemSecFuncInitTerm   "Inherit from model"
      RTWMemSecFuncExecute    "Inherit from model"
      RTWMemSecDataConstants  "Inherit from model"
      RTWMemSecDataInternal   "Inherit from model"
      RTWMemSecDataParameters "Inherit from model"
      SimViewingDevice	      off
      DataTypeOverride	      "UseLocalSettings"
      MinMaxOverflowLogging   "UseLocalSettings"
    }
    Block {
      BlockType		      Constant
      Value		      "1"
      VectorParams1D	      on
      SamplingMode	      "Sample based"
      OutMin		      "[]"
      OutMax		      "[]"
      OutDataTypeMode	      "Inherit from 'Constant value'"
      OutDataType	      "fixdt(1,16,0)"
      ConRadixGroup	      "Use specified scaling"
      OutScaling	      "[]"
      SampleTime	      "inf"
      FramePeriod	      "inf"
    }
  }
  AnnotationDefaults {
    HorizontalAlignment	    "center"
    VerticalAlignment	    "middle"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    FontName		    "Arial"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    UseDisplayTextAsClickCallback off
  }
  LineDefaults {
    FontName		    "Arial"
    FontSize		    9
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  System {
    Name		    "ltpda_library_mrh"
    Location		    [1218, 758, 1754, 1042]
    Open		    on
    ModelBrowserVisibility  off
    ModelBrowserWidth	    200
    ScreenColor		    "white"
    PaperOrientation	    "landscape"
    PaperPositionMode	    "auto"
    PaperType		    "A4"
    PaperUnits		    "inches"
    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
    TiledPageScale	    1
    ShowPageBoundaries	    off
    ZoomFactor		    "100"
    ReportName		    "simulink-default.rpt"
    Block {
      BlockType		      SubSystem
      Name		      "MDC1"
      Ports		      []
      Position		      [80, 140, 169, 217]
      ForegroundColor	      "blue"
      BackgroundColor	      "yellow"
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      System {
	Name			"MDC1"
	Location		[1226, 251, 1752, 622]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"A4"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  SubSystem
	  Name			  "Controllers"
	  Ports			  []
	  Position		  [75, 235, 115, 295]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  System {
	    Name		    "Controllers"
	    Location		    [1221, 431, 1696, 839]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      SubSystem
	      Name		      "DF  dynamics"
	      Ports		      [1, 1]
	      Position		      [80, 225, 125, 275]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model for the response of the drag-free loop dynamics."
	      MaskHelp		      "A model for the response of the drag-free loop dynamics.\n\nThis just computes (s^2 - w_1^2).\n\nInput a vector of frequencies and outputs an AO."
	      MaskDisplay	      "disp('Sw1')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"DF  dynamics"
		Location		[633, 211, 1717, 692]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [795, 318, 825, 332]
		  BackgroundColor	  "[0.752941, 0.752941, 0.752941]"
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  Mux
		  Name			  "Mux"
		  Tag			  "mux"
		  Ports			  [2, 1]
		  Position		  [655, 160, 660, 235]
		  BackgroundColor	  "[0.752941, 0.752941, 0.752941]"
		  Inputs		  "2"
		  DisplayOption		  "bar"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "ao1"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', -1);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [255, 210, 315, 270]
		  BackgroundColor	  "red"
		  AttributesFormatString  "VALS -1"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "ao1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "ao2"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', 6.2831853071795862);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [50, 215, 110, 275]
		  BackgroundColor	  "red"
		  AttributesFormatString  "VALS 6.2832"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "ao2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "cat"
		  Tag			  "method zero"
		  Description		  "params=plist();noParamsReq=1;"
		  Ports			  [1, 1]
		  Position		  [685, 170, 745, 230]
		  BackgroundColor	  "red"
		  AncestorBlock		  "ltpda_library/Methods/zero/Helper/cat"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  CAT concatonate zeros into a vector.\n \n "
		  MaskDisplay		  "disp('cat')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "cat"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "cat"
		    Tag			    "cat"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "cat"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "cat"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "get y1"
		  Ports			  [1, 1]
		  Position		  [420, 134, 475, 186]
		  BackgroundColor	  "magenta"
		  AncestorBlock		  "ltpda_library_mrh/helper/get y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "get y1"
		    Location		    [603, 157, 903, 295]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "ao"
		    Position		    [25, 48, 55, 62]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'data');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [80, 25, 140, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY data"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get1"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'y');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [160, 25, 220, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY y"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get1"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "y"
		    Position		    [245, 48, 275, 62]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "get1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get1"
		    SrcPort		    1
		    DstBlock		    "y"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "get y2"
		  Ports			  [1, 1]
		  Position		  [420, 204, 475, 256]
		  BackgroundColor	  "magenta"
		  AncestorBlock		  "ltpda_library_mrh/helper/get y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "get y2"
		    Location		    [603, 157, 903, 295]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "ao"
		    Position		    [25, 48, 55, 62]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'data');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [80, 25, 140, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY data"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get1"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'y');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [160, 25, 220, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY y"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get1"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "y"
		    Position		    [245, 48, 275, 62]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "get1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get1"
		    SrcPort		    1
		    DstBlock		    "y"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "get y3"
		  Ports			  [1, 1]
		  Position		  [420, 59, 475, 111]
		  BackgroundColor	  "magenta"
		  AncestorBlock		  "ltpda_library_mrh/helper/get y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "get y3"
		    Location		    [603, 157, 903, 295]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "ao"
		    Position		    [25, 48, 55, 62]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'data');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [80, 25, 140, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY data"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get1"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'y');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [160, 25, 220, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY y"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get1"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "y"
		    Position		    [245, 48, 275, 62]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "get1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get1"
		    SrcPort		    1
		    DstBlock		    "y"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "omega1"
		  Ports			  [0, 1]
		  Position		  [40, 135, 100, 175]
		  AncestorBlock		  "ltpda_library_mrh/MDC1/omega1"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "A constant AO that has the value of omega_1 for MDC1."
		  MaskHelp		  "Note: this is not omega_1^2."
		  MaskDisplay		  "disp('w1')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "omega1"
		    Location		    [300, 119, 575, 257]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    SubSystem
		    Name		    "ao"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', -0.001140175425099138);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [25, 25, 85, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "-0.0011402"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "ao"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "set"
		    Tag			    "method ao"
		    Description		    "params=plist('NAME', '\\omega_1', 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', plist(), []) ], 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'XUNITS', '', 'YUNITS', '');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,0,0];"
		    Ports		    [1, 1]
		    Position		    [135, 25, 195, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "\\omega_1"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/set"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  SET set an analysis object property.\n \n "
		    MaskDisplay		    "disp('set')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "set"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "set"
		    Tag			    "set"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "set"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "set"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [220, 48, 250, 62]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "set"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "set"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "pzmodel"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('GAIN', '-->', 'POLES', { 1 }, 'ZEROS', { '-->' }, 'NAME', 'DF_dynamics');paramEnabled=[1,0,1,1];paramSets=plist('SETS', { 'From Poles/Zeros', 'From LISO file', 'From Repository' }, 'CURRSET', 1);"
		  Ports			  [2, 1]
		  Position		  [800, 155, 860, 215]
		  BackgroundColor	  "red"
		  AttributesFormatString  "GAIN -->\\nNAMEDF_dynamics"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Constructor/pzmodel"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  PZMODEL constructor for pzmodel class.\n \n "
		  MaskDisplay		  "disp('pzmodel')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "pzmodel"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "zeros"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "gain"
		    Tag			    "3"
		    Position		    [15, 70, 35, 90]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [3, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "3"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pzmodel"
		    Tag			    "pzmodel"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "pzmodel"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zeros"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "gain"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    3
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "pzmodel"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "resp"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('¶F', '-->', '¶NAME', '[Sw1]');paramEnabled=[1,1];noParamsReq=1;"
		  Ports			  [2, 1]
		  Position		  [910, 185, 970, 245]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->\\n¶NAME[Sw1]"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Signal Processing/resp"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  RESP returns the complex response of a pzmodel as an Analysis Object.\n \n "
		  MaskDisplay		  "disp('resp')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "resp"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "resp"
		    Tag			    "resp"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "resp"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "resp"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y"
		  Ports			  [2, 1]
		  Position		  [355, 212, 395, 248]
		  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input element multiply. Just calls times under the hood."
		  MaskDisplay		  "disp('.*')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x.*y"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y1"
		  Ports			  [2, 1]
		  Position		  [355, 67, 395, 103]
		  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input element multiply. Just calls times under the hood."
		  MaskDisplay		  "disp('.*')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x.*y1"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x/y"
		  Ports			  [2, 1]
		  Position		  [150, 147, 190, 183]
		  AncestorBlock		  "ltpda_library_mrh/operators/x//y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input divide. Just calls rdivide under the hood."
		  MaskDisplay		  "disp('./')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x/y"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "z1"
		  Tag			  "method zero"
		  Description		  "params=plist('¶F', '-->');paramEnabled=[1];noParamsReq=1;"
		  Ports			  [1, 1]
		  Position		  [510, 130, 570, 190]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->"
		  AncestorBlock		  "ltpda_library/Methods/zero/Constructor/zero"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  ZERO construct a pole object.\n \n "
		  MaskDisplay		  "disp('zero')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "z1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "z2"
		  Tag			  "method zero"
		  Description		  "params=plist('¶F', '-->');paramEnabled=[1];noParamsReq=1;"
		  Ports			  [1, 1]
		  Position		  [510, 220, 570, 280]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->"
		  AncestorBlock		  "ltpda_library/Methods/zero/Constructor/zero"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  ZERO construct a pole object.\n \n "
		  MaskDisplay		  "disp('zero')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "z2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [995, 208, 1025, 222]
		  IconDisplay		  "Port number"
		}
		Line {
		  SrcBlock		  "ao2"
		  SrcPort		  1
		  Points		  [10, 0; 0, -70]
		  DstBlock		  "x/y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x/y"
		  SrcPort		  1
		  Points		  [100, 0; 0, -5; 30, 0]
		  Branch {
		    Points		    [0, 60]
		    DstBlock		    "x.*y"
		    DstPort		    1
		  }
		  Branch {
		    DstBlock		    "get y1"
		    DstPort		    1
		  }
		}
		Line {
		  SrcBlock		  "omega1"
		  SrcPort		  1
		  Points		  [20, 0]
		  Branch {
		    DstBlock		    "x/y"
		    DstPort		    1
		  }
		  Branch {
		    Points		    [0, -60; 200, 0]
		    Branch {
		    DstBlock		    "x.*y1"
		    DstPort		    2
		    }
		    Branch {
		    Points		    [0, -20]
		    DstBlock		    "x.*y1"
		    DstPort		    1
		    }
		  }
		}
		Line {
		  SrcBlock		  "get y1"
		  SrcPort		  1
		  DstBlock		  "z1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "ao1"
		  SrcPort		  1
		  DstBlock		  "x.*y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x.*y"
		  SrcPort		  1
		  DstBlock		  "get y2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "get y2"
		  SrcPort		  1
		  Points		  [10, 0; 0, 20]
		  DstBlock		  "z2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "z1"
		  SrcPort		  1
		  Points		  [30, 0; 0, 20]
		  DstBlock		  "Mux"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "z2"
		  SrcPort		  1
		  Points		  [30, 0; 0, -35]
		  DstBlock		  "Mux"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "Mux"
		  SrcPort		  1
		  DstBlock		  "cat"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x.*y1"
		  SrcPort		  1
		  DstBlock		  "get y3"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "pzmodel"
		  SrcPort		  1
		  Points		  [0, 15]
		  DstBlock		  "resp"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  Points		  [65, 0]
		  DstBlock		  "resp"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "resp"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "cat"
		  SrcPort		  1
		  Points		  [15, 0; 0, -30]
		  DstBlock		  "pzmodel"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "get y3"
		  SrcPort		  1
		  Points		  [300, 0; 0, 115]
		  DstBlock		  "pzmodel"
		  DstPort		  2
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "DF Closedloop TF"
	      Ports		      [1, 1]
	      Position		      [80, 24, 140, 76]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model for the closed-loop response of the Drag-free loop."
	      MaskHelp		      "A model for the closed-loop response of the Drag-free loop.\n\nInput a vector of frequencies.\nOutputs an AO."
	      MaskDisplay	      "disp('Sdf')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"DF Closedloop TF"
		Location		[693, 150, 1193, 330]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [305, 108, 335, 122]
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "poles"
		  Ports			  [0, 1]
		  Position		  [30, 28, 75, 72]
		  BackgroundColor	  "green"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "poles"
		    Location		    [645, 227, 1212, 869]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [5, 1]
		    Position		    [300, 231, 305, 479]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "5"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    Reference
		    Name		    "cat"
		    Tag			    "method pole"
		    Ports		    [1, 1]
		    Position		    [345, 325, 405, 385]
		    BackgroundColor	    "red"
		    SourceBlock		    "ltpda_library/Methods/pole/Helper/cat"
		    SourceType		    "Unknown"
		    ShowPortLabels	    "FromPortIcon"
		    SystemSampleTime	    "-1"
		    FunctionWithSeparateData "off"
		    RTWMemSecFuncInitTerm   "Inherit from model"
		    RTWMemSecFuncExecute    "Inherit from model"
		    RTWMemSecDataConstants  "Inherit from model"
		    RTWMemSecDataInternal   "Inherit from model"
		    RTWMemSecDataParameters "Inherit from model"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p1"
		    Tag			    "method pole"
		    Description		    "params=plist('¶F', 0.0064744475369737401, '¶Q', 0.516521773698422);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [30, 25, 90, 85]
		    BackgroundColor	    "green"
		    AttributesFormatString  "¶F 0.0064744\\n¶Q0.51652"
		    AncestorBlock	    "ltpda_library/Methods/pole/Constructor/pole"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  POLE construct a pole object.\n \n "
		    MaskDisplay		    "disp('pole')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pole"
		    Tag			    "pole"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pole"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p2"
		    Tag			    "method pole"
		    Description		    "params=plist('¶F', 0.0155549047828802);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [30, 145, 90, 205]
		    BackgroundColor	    "green"
		    AttributesFormatString  "¶F 0.015555"
		    AncestorBlock	    "ltpda_library/Methods/pole/Constructor/pole"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  POLE construct a pole object.\n \n "
		    MaskDisplay		    "disp('pole')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pole"
		    Tag			    "pole"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pole"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p3"
		    Tag			    "method pole"
		    Description		    "params=plist('¶F', 0.0371202249703977, '¶Q', 0.52725978087112602);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [30, 250, 90, 310]
		    BackgroundColor	    "green"
		    AttributesFormatString  "¶F 0.03712\\n¶Q0.52726"
		    AncestorBlock	    "ltpda_library/Methods/pole/Constructor/pole"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  POLE construct a pole object.\n \n "
		    MaskDisplay		    "disp('pole')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p3"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pole"
		    Tag			    "pole"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pole"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p4"
		    Tag			    "method pole"
		    Description		    "params=plist('¶F', 0.23007245991794301, '¶Q', 0.72510446593177103);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 365, 95, 425]
		    BackgroundColor	    "green"
		    AttributesFormatString  "¶F 0.23007\\n¶Q0.7251"
		    AncestorBlock	    "ltpda_library/Methods/pole/Constructor/pole"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  POLE construct a pole object.\n \n "
		    MaskDisplay		    "disp('pole')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p4"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pole"
		    Tag			    "pole"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pole"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p5"
		    Tag			    "method pole"
		    Description		    "params=plist('¶F', 0.36661041102384401);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 485, 95, 545]
		    BackgroundColor	    "green"
		    AttributesFormatString  "¶F 0.36661"
		    AncestorBlock	    "ltpda_library/Methods/pole/Constructor/pole"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  POLE construct a pole object.\n \n "
		    MaskDisplay		    "disp('pole')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p5"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pole"
		    Tag			    "pole"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pole"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [465, 348, 495, 362]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "cat"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "cat"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "p5"
		    SrcPort		    1
		    Points		    [90, 0; 0, -60]
		    DstBlock		    "Mux"
		    DstPort		    5
		    }
		    Line {
		    SrcBlock		    "p4"
		    SrcPort		    1
		    Points		    [90, 0; 0, 10]
		    DstBlock		    "Mux"
		    DstPort		    4
		    }
		    Line {
		    SrcBlock		    "p3"
		    SrcPort		    1
		    Points		    [75, 0; 0, 75]
		    DstBlock		    "Mux"
		    DstPort		    3
		    }
		    Line {
		    SrcBlock		    "p2"
		    SrcPort		    1
		    Points		    [85, 0; 0, 130]
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "p1"
		    SrcPort		    1
		    Points		    [95, 0; 0, 200]
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "pzmodel"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('GAIN', -6.5517909919528101e-016, 'POLES', { '-->' }, 'ZEROS', { '-->' }, 'NAME', 'dfcl');paramEnabled=[1,1,1,1];paramSets=plist('SETS', { 'From Poles/Zeros', 'From LISO file', 'From Repository' }, 'CURRSET', 1);"
		  Ports			  [2, 1]
		  Position		  [195, 55, 255, 115]
		  BackgroundColor	  "red"
		  AttributesFormatString  "GAIN -6.5518e-016\\nNAMEdfcl"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Constructor/pzmodel"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  PZMODEL constructor for pzmodel class.\n \n "
		  MaskDisplay		  "disp('pzmodel')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "pzmodel"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "poles"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "zeros"
		    Tag			    "3"
		    Position		    [15, 70, 35, 90]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [3, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "3"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pzmodel"
		    Tag			    "pzmodel"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "pzmodel"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zeros"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    3
		    }
		    Line {
		    SrcBlock		    "poles"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pzmodel"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "resp"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('¶F', '-->');paramEnabled=[1];noParamsReq=1;"
		  Ports			  [2, 1]
		  Position		  [360, 70, 420, 130]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Signal Processing/resp"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  RESP returns the complex response of a pzmodel as an Analysis Object.\n \n "
		  MaskDisplay		  "disp('resp')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "resp"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "resp"
		    Tag			    "resp"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "resp"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "resp"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "zeros"
		  Ports			  [0, 1]
		  Position		  [30, 107, 75, 153]
		  BackgroundColor	  "orange"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "zeros"
		    Location		    [581, 87, 1429, 809]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [6, 1]
		    Position		    [445, 60, 455, 325]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "6"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    Reference
		    Name		    "cat"
		    Tag			    "method pole"
		    Ports		    [1, 1]
		    Position		    [510, 165, 570, 225]
		    BackgroundColor	    "red"
		    SourceBlock		    "ltpda_library/Methods/pole/Helper/cat"
		    SourceType		    "Unknown"
		    ShowPortLabels	    "FromPortIcon"
		    SystemSampleTime	    "-1"
		    FunctionWithSeparateData "off"
		    RTWMemSecFuncInitTerm   "Inherit from model"
		    RTWMemSecFuncExecute    "Inherit from model"
		    RTWMemSecDataConstants  "Inherit from model"
		    RTWMemSecDataInternal   "Inherit from model"
		    RTWMemSecDataParameters "Inherit from model"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z1"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 1.0000000000000001e-009);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [30, 25, 90, 85]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 1e-009"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z2"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 8.8335048183861496e-005, '¶Q', 0.50191643209899495);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 115, 95, 175]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 8.8335e-005\\n¶Q0.50192"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z3"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', -0.00018492956118835099);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 215, 95, 275]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F -0.00018493"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z3"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z4"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 0.00018492956118835099);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 305, 95, 365]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 0.00018493"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z4"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z5"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 0.30029421159564101, '¶Q', 0.97193706988250805);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 410, 95, 470]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 0.30029\\n¶Q0.97194"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z5"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z6"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 0.47481544343832799);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 525, 95, 585]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 0.47482"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z6"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [630, 188, 660, 202]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "cat"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "cat"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "z6"
		    SrcPort		    1
		    Points		    [250, 0; 0, -250]
		    DstBlock		    "Mux"
		    DstPort		    6
		    }
		    Line {
		    SrcBlock		    "z5"
		    SrcPort		    1
		    Points		    [200, 0; 0, -180]
		    DstBlock		    "Mux"
		    DstPort		    5
		    }
		    Line {
		    SrcBlock		    "z4"
		    SrcPort		    1
		    Points		    [150, 0; 0, -120]
		    DstBlock		    "Mux"
		    DstPort		    4
		    }
		    Line {
		    SrcBlock		    "z3"
		    SrcPort		    1
		    Points		    [120, 0; 0, -75]
		    DstBlock		    "Mux"
		    DstPort		    3
		    }
		    Line {
		    SrcBlock		    "z2"
		    SrcPort		    1
		    Points		    [100, 0; 0, -20]
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "z1"
		    SrcPort		    1
		    Points		    [100, 0; 0, 65; 235, 0]
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [445, 93, 475, 107]
		  IconDisplay		  "Port number"
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  DstBlock		  "resp"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "resp"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "pzmodel"
		  SrcPort		  1
		  DstBlock		  "resp"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "zeros"
		  SrcPort		  1
		  Points		  [35, 0; 0, -30]
		  DstBlock		  "pzmodel"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "poles"
		  SrcPort		  1
		  Points		  [30, 0; 0, 20]
		  DstBlock		  "pzmodel"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "Drag-free Controller"
	      Ports		      [1, 1]
	      Position		      [80, 124, 140, 176]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model for the response of the Drag-free controller."
	      MaskHelp		      "A model for the response of the Drag-free controller."
	      MaskDisplay	      "disp('Cdf')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"Drag-free Controller"
		Location		[171, 117, 1304, 962]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [25, 48, 55, 62]
		  BackgroundColor	  "[0.752941, 0.752941, 0.752941]"
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "ao"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', 0.10000000000000001);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [860, 115, 920, 175]
		  BackgroundColor	  "red"
		  AttributesFormatString  "VALS 0.1"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "ao"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "ao1"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', 'exp(-0.415.*2*pi*1i*f)', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [680, 630, 740, 690]
		  BackgroundColor	  "red"
		  AttributesFormatString  "FSFCN exp(-0.415.*2*pi*1i*f)\\nF-->"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "ao1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "f1"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '-1.61./(1-exp(-0.30943).*(1./exp(1i*2*pi*f*0.1)))', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [170, 25, 230, 85]
		  BackgroundColor	  "red"
		  AttributesFormatString  "FSFCN ....*(1./exp(1i*2*pi*f*0.1)))\\nF-->"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "f1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "f2"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', 'complex(0.86807, 0.12606)./(1-exp(complex(-9.753e-2,-1.6175e-1)).*(1./exp(1i*2*pi*f*0.1)))', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [170, 130, 230, 190]
		  BackgroundColor	  "red"
		  AttributesFormatString  "FSFCN ....*(1./exp(1i*2*pi*f*0.1)))\\nF-->"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "f2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "f3"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', 'complex(0.86807, -0.12606)./(1-exp(complex(-9.753e-2,1.6175e-1)).*(1./exp(1i*2*pi*f*0.1)))', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [165, 235, 225, 295]
		  BackgroundColor	  "red"
		  AttributesFormatString  "FSFCN ....*(1./exp(1i*2*pi*f*0.1)))\\nF-->"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "f3"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "f4"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '-complex(6.4699,70.435)./(1-exp(complex(-5.5289e-5,-4.8946e-6)).*(1./exp(1i*2*pi*f*0.1)))', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [165, 340, 225, 400]
		  BackgroundColor	  "red"
		  AttributesFormatString  "FSFCN ....*(1./exp(1i*2*pi*f*0.1)))\\nF-->"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "f4"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "f5"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '-complex(6.4699,-70.435)./(1-exp(complex(-5.5289e-5,4.8946e-6)).*(1./exp(1i*2*pi*f*0.1)))', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [160, 445, 220, 505]
		  BackgroundColor	  "red"
		  AttributesFormatString  "FSFCN ....*(1./exp(1i*2*pi*f*0.1)))\\nF-->"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "f5"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "f6"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '12.946./(1 - 1.*(1./exp(1i*2*pi*f*0.1)))', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [160, 550, 220, 610]
		  BackgroundColor	  "red"
		  AttributesFormatString  "FSFCN ....*(1./exp(1i*2*pi*f*0.1)))\\nF-->"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "f6"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x+y"
		  Ports			  [2, 1]
		  Position		  [380, 47, 420, 83]
		  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input plus. Just calls plus under the hood."
		  MaskDisplay		  "disp('+')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x+y"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x+y1"
		  Ports			  [2, 1]
		  Position		  [460, 47, 500, 83]
		  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input plus. Just calls plus under the hood."
		  MaskDisplay		  "disp('+')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x+y1"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x+y2"
		  Ports			  [2, 1]
		  Position		  [535, 47, 575, 83]
		  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input plus. Just calls plus under the hood."
		  MaskDisplay		  "disp('+')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x+y2"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x+y3"
		  Ports			  [2, 1]
		  Position		  [605, 47, 645, 83]
		  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input plus. Just calls plus under the hood."
		  MaskDisplay		  "disp('+')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x+y3"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x+y4"
		  Ports			  [2, 1]
		  Position		  [670, 47, 710, 83]
		  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input plus. Just calls plus under the hood."
		  MaskDisplay		  "disp('+')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x+y4"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y"
		  Ports			  [2, 1]
		  Position		  [875, 47, 915, 83]
		  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input element multiply. Just calls times under the hood."
		  MaskDisplay		  "disp('.*')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x.*y"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y1"
		  Ports			  [2, 1]
		  Position		  [970, 52, 1010, 88]
		  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input element multiply. Just calls times under the hood."
		  MaskDisplay		  "disp('.*')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x.*y1"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [1050, 63, 1080, 77]
		  BackgroundColor	  "[0.752941, 0.752941, 0.752941]"
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "x.*y1"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "ao"
		  SrcPort		  1
		  Points		  [10, 0; 0, -65]
		  DstBlock		  "x.*y1"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x.*y"
		  SrcPort		  1
		  Points		  [0, -5]
		  DstBlock		  "x.*y1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "ao1"
		  SrcPort		  1
		  Points		  [90, 0; 0, -585]
		  DstBlock		  "x.*y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x+y4"
		  SrcPort		  1
		  Points		  [145, 0]
		  DstBlock		  "x.*y"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  Points		  [45, 0]
		  Branch {
		    Points		    [0, 105]
		    Branch {
		    Points		    [0, 105]
		    Branch {
		    Points		    [0, 105]
		    Branch {
		    Points		    [0, 105]
		    Branch {
		    Points		    [0, 105]
		    Branch {
		    Points		    [0, 80]
		    DstBlock		    "ao1"
		    DstPort		    1
		    }
		    Branch {
		    DstBlock		    "f6"
		    DstPort		    1
		    }
		    }
		    Branch {
		    DstBlock		    "f5"
		    DstPort		    1
		    }
		    }
		    Branch {
		    DstBlock		    "f4"
		    DstPort		    1
		    }
		    }
		    Branch {
		    DstBlock		    "f3"
		    DstPort		    1
		    }
		    }
		    Branch {
		    DstBlock		    "f2"
		    DstPort		    1
		    }
		  }
		  Branch {
		    DstBlock		    "f1"
		    DstPort		    1
		  }
		}
		Line {
		  SrcBlock		  "f6"
		  SrcPort		  1
		  Points		  [430, 0]
		  DstBlock		  "x+y4"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x+y3"
		  SrcPort		  1
		  Points		  [0, -10]
		  DstBlock		  "x+y4"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f5"
		  SrcPort		  1
		  Points		  [365, 0]
		  DstBlock		  "x+y3"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x+y2"
		  SrcPort		  1
		  Points		  [5, 0; 0, -10]
		  DstBlock		  "x+y3"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f4"
		  SrcPort		  1
		  Points		  [260, 0; 0, -265; 30, 0]
		  DstBlock		  "x+y2"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x+y1"
		  SrcPort		  1
		  Points		  [5, 0; 0, -10]
		  DstBlock		  "x+y2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f3"
		  SrcPort		  1
		  Points		  [215, 0]
		  DstBlock		  "x+y1"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x+y"
		  SrcPort		  1
		  Points		  [10, 0; 0, -10]
		  DstBlock		  "x+y1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f2"
		  SrcPort		  1
		  Points		  [65, 0; 0, -85]
		  DstBlock		  "x+y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "f1"
		  SrcPort		  1
		  DstBlock		  "x+y"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "Sus dynamics"
	      Ports		      [1, 1]
	      Position		      [75, 320, 120, 370]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model for the response of the suspension loop dynamics."
	      MaskHelp		      "A model for the response of the suspension loop dynamics.\n\nThis just computes (s^2 - w_3^2).\n\nInput a vector of frequencies and outputs an AO."
	      MaskDisplay	      "disp('Sw3')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"Sus dynamics"
		Location		[637, 762, 1725, 1127]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [735, 323, 765, 337]
		  BackgroundColor	  "[0.752941, 0.752941, 0.752941]"
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  Mux
		  Name			  "Mux"
		  Tag			  "mux"
		  Ports			  [2, 1]
		  Position		  [595, 165, 600, 240]
		  BackgroundColor	  "[0.752941, 0.752941, 0.752941]"
		  Inputs		  "2"
		  DisplayOption		  "bar"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "ao1"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', -1);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [195, 215, 255, 275]
		  BackgroundColor	  "red"
		  AttributesFormatString  "VALS -1"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "ao1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "ao2"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', 6.2831853071795862);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [35, 220, 95, 280]
		  BackgroundColor	  "red"
		  AttributesFormatString  "VALS 6.2832"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "ao2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "cat"
		  Tag			  "method zero"
		  Description		  "params=plist();noParamsReq=1;"
		  Ports			  [1, 1]
		  Position		  [625, 175, 685, 235]
		  BackgroundColor	  "red"
		  AncestorBlock		  "ltpda_library/Methods/zero/Helper/cat"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  CAT concatonate zeros into a vector.\n \n "
		  MaskDisplay		  "disp('cat')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "cat"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "cat"
		    Tag			    "cat"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "cat"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "cat"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "get y1"
		  Ports			  [1, 1]
		  Position		  [360, 139, 415, 191]
		  BackgroundColor	  "magenta"
		  AncestorBlock		  "ltpda_library_mrh/helper/get y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "get y1"
		    Location		    [603, 157, 903, 295]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "ao"
		    Position		    [25, 48, 55, 62]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'data');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [80, 25, 140, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY data"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get1"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'y');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [160, 25, 220, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY y"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get1"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "y"
		    Position		    [245, 48, 275, 62]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "get1"
		    SrcPort		    1
		    DstBlock		    "y"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "get1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "get y2"
		  Ports			  [1, 1]
		  Position		  [360, 209, 415, 261]
		  BackgroundColor	  "magenta"
		  AncestorBlock		  "ltpda_library_mrh/helper/get y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "get y2"
		    Location		    [603, 157, 903, 295]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "ao"
		    Position		    [25, 48, 55, 62]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'data');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [80, 25, 140, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY data"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get1"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'y');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [160, 25, 220, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY y"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get1"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "y"
		    Position		    [245, 48, 275, 62]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "get1"
		    SrcPort		    1
		    DstBlock		    "y"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "get1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "get y3"
		  Ports			  [1, 1]
		  Position		  [360, 64, 415, 116]
		  BackgroundColor	  "magenta"
		  AncestorBlock		  "ltpda_library_mrh/helper/get y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "get y3"
		    Location		    [603, 157, 903, 295]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "ao"
		    Position		    [25, 48, 55, 62]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'data');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [80, 25, 140, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY data"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "get1"
		    Tag			    "method ao"
		    Description		    "params=plist('PROPERTY', 'y');paramEnabled=[1];"
		    Ports		    [1, 1]
		    Position		    [160, 25, 220, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "PROPERTY y"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/get"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  GET get ao properties.\n \n "
		    MaskDisplay		    "disp('get')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "get1"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "get"
		    Tag			    "get"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "y"
		    Position		    [245, 48, 275, 62]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "get1"
		    SrcPort		    1
		    DstBlock		    "y"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "get"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "get"
		    SrcPort		    1
		    DstBlock		    "get1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "omega3"
		  Ports			  [0, 1]
		  Position		  [30, 147, 90, 183]
		  AncestorBlock		  "ltpda_library_mrh/MDC1/omega3"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "A constant AO that has the value of omega_3 for MDC1."
		  MaskHelp		  "A constant AO that has the value of omega_3 for MDC1.\n\nNote: this is not omega_3^2\n\nThis is equivalent to the variable omega_2 in Stefano's technical note."
		  MaskDisplay		  "disp('w3')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "omega3"
		    Location		    [1307, 403, 1582, 530]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    SubSystem
		    Name		    "ao"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', -0.001414213562373095);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [25, 25, 85, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "-0.0014142"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "ao"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "set"
		    Tag			    "method ao"
		    Description		    "params=plist('NAME', '\\omega_3', 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', plist(), []) ], 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'XUNITS', '', 'YUNITS', '');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,0,0];"
		    Ports		    [1, 1]
		    Position		    [135, 25, 195, 85]
		    BackgroundColor	    "red"
		    AttributesFormatString  "\\omega_3"
		    AncestorBlock	    "ltpda_library/Methods/ao/Helper/set"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  SET set an analysis object property.\n \n "
		    MaskDisplay		    "disp('set')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "set"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "set"
		    Tag			    "set"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "set"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "set"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [220, 48, 250, 62]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "set"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "set"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "pzmodel"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('GAIN', '-->', 'POLES', { 1 }, 'ZEROS', { '-->' }, 'NAME', 'Sus_dynamics');paramEnabled=[1,0,1,1];paramSets=plist('SETS', { 'From Poles/Zeros', 'From LISO file', 'From Repository' }, 'CURRSET', 1);"
		  Ports			  [2, 1]
		  Position		  [740, 160, 800, 220]
		  BackgroundColor	  "red"
		  AttributesFormatString  "GAIN -->\\nNAMESus_dynamics"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Constructor/pzmodel"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  PZMODEL constructor for pzmodel class.\n \n "
		  MaskDisplay		  "disp('pzmodel')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "pzmodel"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "zeros"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "gain"
		    Tag			    "3"
		    Position		    [15, 70, 35, 90]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [3, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "3"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pzmodel"
		    Tag			    "pzmodel"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "pzmodel"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "gain"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    3
		    }
		    Line {
		    SrcBlock		    "zeros"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pzmodel"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "resp"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('¶F', '-->', '¶NAME', '[Sw3]');paramEnabled=[1,1];noParamsReq=1;"
		  Ports			  [2, 1]
		  Position		  [850, 190, 910, 250]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->\\n¶NAME[Sw3]"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Signal Processing/resp"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  RESP returns the complex response of a pzmodel as an Analysis Object.\n \n "
		  MaskDisplay		  "disp('resp')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "resp"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "resp"
		    Tag			    "resp"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "resp"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "resp"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y"
		  Ports			  [2, 1]
		  Position		  [295, 217, 335, 253]
		  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input element multiply. Just calls times under the hood."
		  MaskDisplay		  "disp('.*')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x.*y"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y1"
		  Ports			  [2, 1]
		  Position		  [295, 72, 335, 108]
		  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input element multiply. Just calls times under the hood."
		  MaskDisplay		  "disp('.*')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x.*y1"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x/y"
		  Ports			  [2, 1]
		  Position		  [135, 152, 175, 188]
		  AncestorBlock		  "ltpda_library_mrh/operators/x//y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input divide. Just calls rdivide under the hood."
		  MaskDisplay		  "disp('./')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x/y"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "z1"
		  Tag			  "method zero"
		  Description		  "params=plist('¶F', '-->');paramEnabled=[1];noParamsReq=1;"
		  Ports			  [1, 1]
		  Position		  [450, 135, 510, 195]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->"
		  AncestorBlock		  "ltpda_library/Methods/zero/Constructor/zero"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  ZERO construct a pole object.\n \n "
		  MaskDisplay		  "disp('zero')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "z1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "z2"
		  Tag			  "method zero"
		  Description		  "params=plist('¶F', '-->');paramEnabled=[1];noParamsReq=1;"
		  Ports			  [1, 1]
		  Position		  [450, 225, 510, 285]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->"
		  AncestorBlock		  "ltpda_library/Methods/zero/Constructor/zero"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  ZERO construct a pole object.\n \n "
		  MaskDisplay		  "disp('zero')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "z2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [935, 213, 965, 227]
		  IconDisplay		  "Port number"
		}
		Line {
		  SrcBlock		  "x/y"
		  SrcPort		  1
		  Points		  [80, 0]
		  Branch {
		    Points		    [0, 55]
		    DstBlock		    "x.*y"
		    DstPort		    1
		  }
		  Branch {
		    Points		    [0, -5]
		    DstBlock		    "get y1"
		    DstPort		    1
		  }
		}
		Line {
		  SrcBlock		  "omega3"
		  SrcPort		  1
		  Points		  [10, 0; 0, -5]
		  Branch {
		    DstBlock		    "x/y"
		    DstPort		    1
		  }
		  Branch {
		    Points		    [0, -60; 145, 0]
		    Branch {
		    DstBlock		    "x.*y1"
		    DstPort		    2
		    }
		    Branch {
		    Points		    [0, -20]
		    DstBlock		    "x.*y1"
		    DstPort		    1
		    }
		  }
		}
		Line {
		  SrcBlock		  "ao2"
		  SrcPort		  1
		  Points		  [10, 0; 0, -70]
		  DstBlock		  "x/y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "get y3"
		  SrcPort		  1
		  Points		  [300, 0; 0, 115]
		  DstBlock		  "pzmodel"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "cat"
		  SrcPort		  1
		  Points		  [15, 0; 0, -30]
		  DstBlock		  "pzmodel"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "resp"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  Points		  [65, 0]
		  DstBlock		  "resp"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "pzmodel"
		  SrcPort		  1
		  Points		  [0, 15]
		  DstBlock		  "resp"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x.*y1"
		  SrcPort		  1
		  DstBlock		  "get y3"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Mux"
		  SrcPort		  1
		  DstBlock		  "cat"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "z2"
		  SrcPort		  1
		  Points		  [30, 0; 0, -35]
		  DstBlock		  "Mux"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "z1"
		  SrcPort		  1
		  Points		  [30, 0; 0, 20]
		  DstBlock		  "Mux"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "get y2"
		  SrcPort		  1
		  Points		  [10, 0; 0, 20]
		  DstBlock		  "z2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x.*y"
		  SrcPort		  1
		  DstBlock		  "get y2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "ao1"
		  SrcPort		  1
		  DstBlock		  "x.*y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "get y1"
		  SrcPort		  1
		  DstBlock		  "z1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "Suspension\nClosed-loop"
	      Ports		      [1, 1]
	      Position		      [225, 29, 285, 81]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model for the closed-loop response of the suspension loop."
	      MaskHelp		      "A model for the closed-loop response of the suspension loop."
	      MaskDisplay	      "disp('Ssus')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"Suspension\nClosed-loop"
		Location		[688, 212, 1128, 501]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [25, 248, 55, 262]
		  BackgroundColor	  "[0.752941, 0.752941, 0.752941]"
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "poles"
		  Ports			  [0, 1]
		  Position		  [25, 25, 65, 85]
		  BackgroundColor	  "green"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "poles"
		    Location		    [670, 342, 1128, 733]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [3, 1]
		    Position		    [260, 52, 265, 128]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "3"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "cat"
		    Tag			    "method pole"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [320, 60, 380, 120]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/pole/Helper/cat"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  CAT concatonate poles into a vector.\n \n "
		    MaskDisplay		    "disp('cat')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "cat"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "cat"
		    Tag			    "cat"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "cat"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "cat"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "pole"
		    Tag			    "method pole"
		    Description		    "params=plist('¶F', 0.00142299300168047, '¶Q', 1.1954142742382401);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [30, 25, 90, 85]
		    BackgroundColor	    "green"
		    AttributesFormatString  "¶F 0.001423\\n¶Q1.1954"
		    AncestorBlock	    "ltpda_library/Methods/pole/Constructor/pole"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  POLE construct a pole object.\n \n "
		    MaskDisplay		    "disp('pole')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "pole"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pole"
		    Tag			    "pole"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pole"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "pole1"
		    Tag			    "method pole"
		    Description		    "params=plist('¶F', 0.0058195128161330203, '¶Q', 0.69195181671642703);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [30, 150, 90, 210]
		    BackgroundColor	    "green"
		    AttributesFormatString  "¶F 0.0058195\\n¶Q0.69195"
		    AncestorBlock	    "ltpda_library/Methods/pole/Constructor/pole"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  POLE construct a pole object.\n \n "
		    MaskDisplay		    "disp('pole')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "pole1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pole"
		    Tag			    "pole"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pole"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "pole2"
		    Tag			    "method pole"
		    Description		    "params=plist('¶F', 0.014090193028266199, '¶Q', 0.55851670063052095);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [30, 265, 90, 325]
		    BackgroundColor	    "green"
		    AttributesFormatString  "¶F 0.01409\\n¶Q0.55852"
		    AncestorBlock	    "ltpda_library/Methods/pole/Constructor/pole"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  POLE construct a pole object.\n \n "
		    MaskDisplay		    "disp('pole')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "pole2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pole"
		    Tag			    "pole"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pole"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [405, 83, 435, 97]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "cat"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "cat"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pole2"
		    SrcPort		    1
		    Points		    [150, 0]
		    DstBlock		    "Mux"
		    DstPort		    3
		    }
		    Line {
		    SrcBlock		    "pole1"
		    SrcPort		    1
		    Points		    [75, 0; 0, -90]
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "pole"
		    SrcPort		    1
		    Points		    [115, 0; 0, 10]
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "pzmodel"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('GAIN', -1.1699644458255099e-008, 'POLES', { '-->' }, 'ZEROS', { '-->' }, 'NAME', 'Ssus');paramEnabled=[1,1,1,1];paramSets=plist('SETS', { 'From Poles/Zeros', 'From LISO file', 'From Repository' }, 'CURRSET', 1);"
		  Ports			  [2, 1]
		  Position		  [165, 75, 225, 135]
		  BackgroundColor	  "red"
		  AttributesFormatString  "GAIN -1.17e-008\\nNAMESsus"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Constructor/pzmodel"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  PZMODEL constructor for pzmodel class.\n \n "
		  MaskDisplay		  "disp('pzmodel')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "pzmodel"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "poles"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "zeros"
		    Tag			    "3"
		    Position		    [15, 70, 35, 90]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [3, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "3"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pzmodel"
		    Tag			    "pzmodel"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "pzmodel"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zeros"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    3
		    }
		    Line {
		    SrcBlock		    "poles"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pzmodel"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "resp"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('¶F', '-->');paramEnabled=[1];noParamsReq=1;"
		  Ports			  [2, 1]
		  Position		  [300, 100, 360, 160]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Signal Processing/resp"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  RESP returns the complex response of a pzmodel as an Analysis Object.\n \n "
		  MaskDisplay		  "disp('resp')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "resp"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "resp"
		    Tag			    "resp"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "resp"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "resp"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "zeros"
		  Ports			  [0, 1]
		  Position		  [25, 130, 65, 190]
		  BackgroundColor	  "orange"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "zeros"
		    Location		    [598, 197, 1188, 745]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [5, 1]
		    Position		    [390, 25, 395, 185]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "5"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "cat"
		    Tag			    "method zero"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [450, 75, 510, 135]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/zero/Helper/cat"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  CAT concatonate zeros into a vector.\n \n "
		    MaskDisplay		    "disp('cat')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "cat"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "cat"
		    Tag			    "cat"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "cat"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "cat"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z1"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 1.0000000000000001e-009);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 30, 95, 90]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 1e-009"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z1"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z2"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 0.00022507896368004801);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 130, 95, 190]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 0.00022508"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z2"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z3"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', -0.00022507896368004801);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [35, 230, 95, 290]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F -0.00022508"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z3"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z4"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 0.0135460950102467, '¶Q', 0.76560239890209003);paramEnabled=[1,1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [25, 325, 85, 385]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 0.013546\\n¶Q0.7656"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z4"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z5"
		    Tag			    "method zero"
		    Description		    "params=plist('¶F', 0.017135121646374901);paramEnabled=[1];noParamsReq=1;"
		    Ports		    [0, 1]
		    Position		    [25, 435, 85, 495]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "¶F 0.017135"
		    AncestorBlock	    "ltpda_library/Methods/zero/Constructor/zero"
		    OpenFcn		    "figure(findobj('Tag','LTPDAGUI'))"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  ZERO construct a pole object.\n \n "
		    MaskDisplay		    "disp('zero')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z5"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "zero"
		    Tag			    "zero"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "zero"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "zero"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [535, 98, 565, 112]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "cat"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "cat"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "z5"
		    SrcPort		    1
		    Points		    [285, 0]
		    DstBlock		    "Mux"
		    DstPort		    5
		    }
		    Line {
		    SrcBlock		    "z4"
		    SrcPort		    1
		    Points		    [210, 0; 0, -220]
		    DstBlock		    "Mux"
		    DstPort		    4
		    }
		    Line {
		    SrcBlock		    "z3"
		    SrcPort		    1
		    Points		    [155, 0; 0, -155]
		    DstBlock		    "Mux"
		    DstPort		    3
		    }
		    Line {
		    SrcBlock		    "z2"
		    SrcPort		    1
		    Points		    [135, 0; 0, -85]
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "z1"
		    SrcPort		    1
		    Points		    [135, 0; 0, -15]
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [385, 123, 415, 137]
		  IconDisplay		  "Port number"
		}
		Line {
		  SrcBlock		  "resp"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  Points		  [225, 0]
		  DstBlock		  "resp"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "pzmodel"
		  SrcPort		  1
		  Points		  [20, 0; 0, 10]
		  DstBlock		  "resp"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "zeros"
		  SrcPort		  1
		  Points		  [80, 0]
		  DstBlock		  "pzmodel"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "poles"
		  SrcPort		  1
		  Points		  [35, 0; 0, 35]
		  DstBlock		  "pzmodel"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "Suspension Controller"
	      Ports		      [1, 1]
	      Position		      [230, 119, 290, 171]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model of the suspension controller response."
	      MaskHelp		      "A model of the suspension controller response.\n\nThis reads from an external LISO file."
	      MaskDisplay	      "disp('Csus')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"Suspension Controller"
		Location		[747, 207, 1113, 360]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [175, 78, 205, 92]
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "pzmodel"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('FILENAME', 'mdc_liso_filters/clfs_vfit.fil');paramEnabled=[1];paramSets=plist('SETS', { 'From Poles/Zeros', 'From LISO file', 'From Repository' }, 'CURRSET', 2);"
		  Ports			  [0, 1]
		  Position		  [80, 25, 140, 85]
		  BackgroundColor	  "red"
		  AttributesFormatString  "FILENAME ...liso_filters/clfs_vfit.fil"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Constructor/pzmodel"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  PZMODEL constructor for pzmodel class.\n \n "
		  MaskDisplay		  "disp('pzmodel')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "pzmodel"
		    Location		    [164, 470, 515, 644]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "pzmodel"
		    Tag			    "pzmodel"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "pzmodel"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "pzmodel"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "resp"
		  Tag			  "method pzmodel"
		  Description		  "params=plist('¶F', '-->');paramEnabled=[1];noParamsReq=1;"
		  Ports			  [2, 1]
		  Position		  [230, 40, 290, 100]
		  BackgroundColor	  "red"
		  AttributesFormatString  "¶F -->"
		  AncestorBlock		  "ltpda_library/Methods/pzmodel/Signal Processing/resp"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  RESP returns the complex response of a pzmodel as an Analysis Object.\n \n "
		  MaskDisplay		  "disp('resp')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "resp"
		    Location		    [546, 498, 897, 672]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "resp"
		    Tag			    "resp"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [260, 63, 290, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "resp"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "resp"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [315, 63, 345, 77]
		  IconDisplay		  "Port number"
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  DstBlock		  "resp"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "resp"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "pzmodel"
		  SrcPort		  1
		  DstBlock		  "resp"
		  DstPort		  1
		}
	      }
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Noise models"
	  Ports			  []
	  Position		  [80, 85, 120, 145]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  System {
	    Name		    "Noise models"
	    Location		    [1189, 538, 1601, 942]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      SubSystem
	      Name		      "IFO Sensing Noise"
	      Ports		      [1, 1]
	      Position		      [110, 290, 150, 350]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model of the sensing noise at the output of the two IFO channels."
	      MaskHelp		      "A model of the sensing noise at the output of the two IFO channels.\n\nInput is a vector of frequencies.\nOutput is an AO."
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"IFO Sensing Noise"
		Location		[1070, 448, 1875, 1106]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [25, 28, 55, 42]
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "gain"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', 1.2250000000000001e-023);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [455, 320, 515, 380]
		  BackgroundColor	  "red"
		  AttributesFormatString  "1.225e-023"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "gain"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "p2"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '(1+(f./1e-6).^2)', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [110, 335, 170, 395]
		  BackgroundColor	  "green"
		  AttributesFormatString  "(1+(f./1e-6).^2)\\n-->"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "p2"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "p3"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '(1+(f./1e-7).^2)', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [110, 535, 170, 595]
		  BackgroundColor	  "green"
		  AttributesFormatString  "(1+(f./1e-7).^2)\\n-->"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "p3"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "set"
		  Tag			  "method ao"
		  Description		  "params=plist('NAME', 'IFO  noise', 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', plist(), []) ], 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203010852429))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203010852429))], 'XUNITS', 'Hz', 'YUNITS', 'm^2/Hz');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,1,1];"
		  Ports			  [1, 1]
		  Position		  [615, 240, 675, 300]
		  BackgroundColor	  "red"
		  AttributesFormatString  "IFO  noise\\nHz\\nm^2/Hz"
		  AncestorBlock		  "ltpda_library/Methods/ao/Helper/set"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  SET set an analysis object property.\n \n "
		  MaskDisplay		  "disp('set')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "set"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "set"
		    Tag			    "set"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "set"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "set"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "unity"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', 1);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [120, 30, 180, 90]
		  BackgroundColor	  "cyan"
		  AttributesFormatString  "1"
		  AncestorBlock		  "ltpda_library_mrh/MDC1/Noise models/Space-craft Force noise/poles/unity"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "unity"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x+y"
		  Ports			  [2, 1]
		  Position		  [315, 410, 355, 470]
		  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input plus. Just calls plus under the hood."
		  MaskDisplay		  "disp('+')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x+y"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x+y1"
		  Ports			  [2, 1]
		  Position		  [455, 235, 495, 295]
		  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input plus. Just calls plus under the hood."
		  MaskDisplay		  "disp('+')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x+y1"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y"
		  Ports			  [2, 1]
		  Position		  [555, 240, 595, 300]
		  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input element multiply. Just calls times under the hood."
		  MaskDisplay		  "disp('.*')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x.*y"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y1"
		  Ports			  [2, 1]
		  Position		  [380, 370, 420, 430]
		  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input element multiply. Just calls times under the hood."
		  MaskDisplay		  "disp('.*')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x.*y1"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x/y2"
		  Ports			  [2, 1]
		  Position		  [230, 245, 270, 305]
		  AncestorBlock		  "ltpda_library_mrh/MDC1/Noise models/Space-craft Force noise/x//y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "x/y2"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x/y3"
		  Ports			  [2, 1]
		  Position		  [230, 455, 270, 515]
		  AncestorBlock		  "ltpda_library_mrh/MDC1/Noise models/Space-craft Force noise/x//y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "x/y3"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "z1"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', '(1e-2./1e-6).^2');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [115, 230, 175, 290]
		  BackgroundColor	  "orange"
		  AttributesFormatString  "(1e-2./1e-6).^2"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "z1"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "z2"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', '(1+(3e-4/1e-7).^2)');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [115, 435, 175, 495]
		  BackgroundColor	  "orange"
		  AttributesFormatString  "(1+(3e-4/1e-7).^2)"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "z2"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [750, 263, 780, 277]
		  IconDisplay		  "Port number"
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  Points		  [15, 0; 0, 330]
		  Branch {
		    Points		    [0, 200]
		    DstBlock		    "p3"
		    DstPort		    1
		  }
		  Branch {
		    DstBlock		    "p2"
		    DstPort		    1
		  }
		}
		Line {
		  SrcBlock		  "x.*y"
		  SrcPort		  1
		  DstBlock		  "set"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "set"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "gain"
		  SrcPort		  1
		  Points		  [10, 0; 0, -65]
		  DstBlock		  "x.*y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x+y1"
		  SrcPort		  1
		  Points		  [20, 0; 0, -10]
		  DstBlock		  "x.*y"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x.*y1"
		  SrcPort		  1
		  Points		  [15, 0]
		  DstBlock		  "x+y1"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x/y2"
		  SrcPort		  1
		  Points		  [45, 0; 0, 110]
		  DstBlock		  "x.*y1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x+y"
		  SrcPort		  1
		  Points		  [0, -25]
		  DstBlock		  "x.*y1"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x/y3"
		  SrcPort		  1
		  Points		  [25, 0]
		  DstBlock		  "x+y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "p3"
		  SrcPort		  1
		  Points		  [15, 0; 0, -65]
		  DstBlock		  "x/y3"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "z2"
		  SrcPort		  1
		  Points		  [15, 0; 0, 5]
		  DstBlock		  "x/y3"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "p2"
		  SrcPort		  1
		  Points		  [20, 0; 0, -75]
		  DstBlock		  "x/y2"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "z1"
		  SrcPort		  1
		  DstBlock		  "x/y2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "unity"
		  SrcPort		  1
		  Points		  [5, 0]
		  Branch {
		    Points		    [195, 0; 0, 190]
		    DstBlock		    "x+y1"
		    DstPort		    1
		  }
		  Branch {
		    Points		    [0, 365]
		    DstBlock		    "x+y"
		    DstPort		    1
		  }
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "Space-craft Force noise"
	      Ports		      [1, 1]
	      Position		      [110, 180, 150, 240]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model for the force noise on the space craft. Input is a vector"
	      MaskHelp		      "A model for the force noise on the space craft. \n\nInput is a vector of frequencies. \nOutput is an AO."
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"Space-craft Force noise"
		Location		[799, 384, 1692, 1073]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [25, 48, 55, 62]
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "gain"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', 5.2604999579159996e-020);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [455, 340, 515, 400]
		  BackgroundColor	  "red"
		  AttributesFormatString  "5.2605e-020"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "gain"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "p1"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '1 + (f./100).^2', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [120, 145, 180, 205]
		  BackgroundColor	  "green"
		  AttributesFormatString  "1 + (f./100).^2\\n-->"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "p1"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "p2"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '1 + (f/1e-6).^2', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [110, 355, 170, 415]
		  BackgroundColor	  "green"
		  AttributesFormatString  "1 + (f/1e-6).^2\\n-->"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "p2"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "p3"
		  Tag			  "method ao"
		  Description		  "params=plist('FSFCN', '1 + (f/0.1e-6).^2', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		  Ports			  [1, 1]
		  Position		  [110, 555, 170, 615]
		  BackgroundColor	  "green"
		  AttributesFormatString  "1 + (f/0.1e-6).^2\\n-->"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "p3"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "set"
		  Tag			  "method ao"
		  Description		  "params=plist('NAME', 'SC  noise', 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', [], []) ], 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203010852429))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203010852429))], 'XUNITS', 'Hz', 'YUNITS', 'm^2s^{-4}/Hz');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,1,1];"
		  Ports			  [1, 1]
		  Position		  [615, 260, 675, 320]
		  BackgroundColor	  "red"
		  AttributesFormatString  "SC  noise\\nHz\\nm^2s^{-4}/Hz"
		  AncestorBlock		  "ltpda_library/Methods/ao/Helper/set"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  SET set an analysis object property.\n \n "
		  MaskDisplay		  "disp('set')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "set"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "set"
		    Tag			    "set"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "set"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "set"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "unity"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', 1);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [120, 50, 180, 110]
		  BackgroundColor	  "cyan"
		  AttributesFormatString  "1"
		  AncestorBlock		  "ltpda_library_mrh/MDC1/Noise models/Space-craft Force noise/poles/unity"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "unity"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x+y"
		  Ports			  [2, 1]
		  Position		  [315, 430, 355, 490]
		  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "Two input plus. Just calls plus under the hood."
		  MaskDisplay		  "disp('+')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "autoscale"
		  System {
		    Name		    "x+y"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		  }
		}
		Block {
		  BlockType		  Reference
		  Name			  "x+y1"
		  Ports			  [2, 1]
		  Position		  [455, 255, 495, 315]
		  SourceBlock		  "ltpda_library_mrh/operators/x+y"
		  SourceType		  "Unknown"
		  ShowPortLabels	  "FromPortIcon"
		  SystemSampleTime	  "-1"
		  FunctionWithSeparateData "off"
		  RTWMemSecFuncInitTerm	  "Inherit from model"
		  RTWMemSecFuncExecute	  "Inherit from model"
		  RTWMemSecDataConstants  "Inherit from model"
		  RTWMemSecDataInternal	  "Inherit from model"
		  RTWMemSecDataParameters "Inherit from model"
		}
		Block {
		  BlockType		  Reference
		  Name			  "x.*y"
		  Ports			  [2, 1]
		  Position		  [555, 260, 595, 320]
		  SourceBlock		  "ltpda_library_mrh/operators/x.*y"
		  SourceType		  "Unknown"
		  ShowPortLabels	  "FromPortIcon"
		  SystemSampleTime	  "-1"
		  FunctionWithSeparateData "off"
		  RTWMemSecFuncInitTerm	  "Inherit from model"
		  RTWMemSecFuncExecute	  "Inherit from model"
		  RTWMemSecDataConstants  "Inherit from model"
		  RTWMemSecDataInternal	  "Inherit from model"
		  RTWMemSecDataParameters "Inherit from model"
		}
		Block {
		  BlockType		  Reference
		  Name			  "x.*y1"
		  Ports			  [2, 1]
		  Position		  [380, 390, 420, 450]
		  SourceBlock		  "ltpda_library_mrh/operators/x.*y"
		  SourceType		  "Unknown"
		  ShowPortLabels	  "FromPortIcon"
		  SystemSampleTime	  "-1"
		  FunctionWithSeparateData "off"
		  RTWMemSecFuncInitTerm	  "Inherit from model"
		  RTWMemSecFuncExecute	  "Inherit from model"
		  RTWMemSecDataConstants  "Inherit from model"
		  RTWMemSecDataInternal	  "Inherit from model"
		  RTWMemSecDataParameters "Inherit from model"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x/y1"
		  Ports			  [2, 1]
		  Position		  [220, 65, 260, 125]
		  AncestorBlock		  "ltpda_library_mrh/MDC1/Noise models/Space-craft Force noise/x//y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "x/y1"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x/y2"
		  Ports			  [2, 1]
		  Position		  [230, 265, 270, 325]
		  AncestorBlock		  "ltpda_library_mrh/MDC1/Noise models/Space-craft Force noise/x//y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "x/y2"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x/y3"
		  Ports			  [2, 1]
		  Position		  [230, 475, 270, 535]
		  AncestorBlock		  "ltpda_library_mrh/MDC1/Noise models/Space-craft Force noise/x//y"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "x/y3"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "z1"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', '1 + (10e-3/1e-6)^2');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [115, 250, 175, 310]
		  BackgroundColor	  "orange"
		  AttributesFormatString  "1 + (10e-3/1e-6)^2"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "z1"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "z2"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', '1 + (0.1e-3/0.1e-6)^2');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [115, 455, 175, 515]
		  BackgroundColor	  "orange"
		  AttributesFormatString  "1 + (0.1e-3/0.1e-6)^2"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "z2"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [750, 283, 780, 297]
		  IconDisplay		  "Port number"
		}
		Line {
		  SrcBlock		  "x.*y"
		  SrcPort		  1
		  DstBlock		  "set"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "set"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "gain"
		  SrcPort		  1
		  Points		  [10, 0; 0, -65]
		  DstBlock		  "x.*y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x+y1"
		  SrcPort		  1
		  Points		  [20, 0; 0, -10]
		  DstBlock		  "x.*y"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x.*y1"
		  SrcPort		  1
		  Points		  [15, 0]
		  DstBlock		  "x+y1"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x/y1"
		  SrcPort		  1
		  Points		  [120, 0; 0, 175]
		  DstBlock		  "x+y1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x/y2"
		  SrcPort		  1
		  Points		  [45, 0; 0, 110]
		  DstBlock		  "x.*y1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x+y"
		  SrcPort		  1
		  Points		  [0, -25]
		  DstBlock		  "x.*y1"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x/y3"
		  SrcPort		  1
		  Points		  [10, 0; 0, -30]
		  DstBlock		  "x+y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "p3"
		  SrcPort		  1
		  Points		  [15, 0; 0, -65]
		  DstBlock		  "x/y3"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "z2"
		  SrcPort		  1
		  Points		  [15, 0; 0, 5]
		  DstBlock		  "x/y3"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "p2"
		  SrcPort		  1
		  Points		  [20, 0; 0, -75]
		  DstBlock		  "x/y2"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "z1"
		  SrcPort		  1
		  DstBlock		  "x/y2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "p1"
		  SrcPort		  1
		  Points		  [10, 0; 0, -65]
		  DstBlock		  "x/y1"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "unity"
		  SrcPort		  1
		  Points		  [5, 0]
		  Branch {
		    Points		    [0, 365]
		    DstBlock		    "x+y"
		    DstPort		    1
		  }
		  Branch {
		    DstBlock		    "x/y1"
		    DstPort		    1
		  }
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  Points		  [35, 0; 0, 120; 10, 0]
		  Branch {
		    Points		    [-10, 0; 0, 210]
		    Branch {
		    DstBlock		    "p3"
		    DstPort		    1
		    }
		    Branch {
		    DstBlock		    "p2"
		    DstPort		    1
		    }
		  }
		  Branch {
		    DstBlock		    "p1"
		    DstPort		    1
		  }
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "Test-mass Force noise"
	      Ports		      [1, 1]
	      Position		      [110, 55, 150, 115]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "A model for the force noise on test-mass. Input is a vector"
	      MaskHelp		      "A model for the force noise on test-mass. \n\nInput is a vector of frequencies. \nOutput is an AO."
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "autoscale"
	      System {
		Name			"Test-mass Force noise"
		Location		[295, 522, 1012, 1037]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "f"
		  Position		  [25, 48, 55, 62]
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "gain"
		  Tag			  "method ao"
		  Description		  "params=plist('VALS', 8.9999999999999996e-028);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		  Ports			  [0, 1]
		  Position		  [185, 170, 245, 230]
		  BackgroundColor	  "red"
		  AttributesFormatString  "9e-028"
		  AncestorBlock		  "ltpda_library/Methods/ao/Constructor/ao"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  AO analysis object class constructor.\n \n "
		  MaskDisplay		  "disp('ao')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "gain"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "poles"
		  Ports			  [0, 1]
		  Position		  [80, 115, 120, 175]
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "poles"
		    Location		    [837, 457, 1487, 1020]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    SubSystem
		    Name		    "p1"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', '(1 + (1e-3./100).^2)');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [45, 25, 105, 85]
		    BackgroundColor	    "green"
		    AttributesFormatString  "(1 + (1e-3./100).^2)"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p1"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p2"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', '(1 + (3e-3./1e-6).^2)');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [45, 130, 105, 190]
		    BackgroundColor	    "green"
		    AttributesFormatString  "(1 + (3e-3./1e-6).^2)"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p2"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p3"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', '(1 + (1e-3./1e-6).^2)');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [50, 235, 110, 295]
		    BackgroundColor	    "green"
		    AttributesFormatString  "(1 + (1e-3./1e-6).^2)"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p3"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p4"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', '(1 + (0.1e-3./0.1e-6).^2)');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [50, 340, 110, 400]
		    BackgroundColor	    "green"
		    AttributesFormatString  "(1 + (0.1e-3./0.1e-6).^2)"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p4"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "p5"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', '(1 + (1e-3./0.1e-6).^2)');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [55, 450, 115, 510]
		    BackgroundColor	    "green"
		    AttributesFormatString  "(1 + (1e-3./0.1e-6).^2)"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "p5"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "unity"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', 1);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [220, 25, 280, 85]
		    BackgroundColor	    "cyan"
		    AttributesFormatString  "1"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "unity"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x+y"
		    Ports		    [2, 1]
		    Position		    [345, 380, 385, 440]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x+y"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x+y1"
		    Ports		    [2, 1]
		    Position		    [530, 155, 570, 215]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x+y1"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x.*y"
		    Ports		    [2, 1]
		    Position		    [450, 210, 490, 270]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x.*y"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x/y"
		    Ports		    [2, 1]
		    Position		    [340, 50, 380, 110]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x/y"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x/y1"
		    Ports		    [2, 1]
		    Position		    [215, 170, 255, 230]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x/y1"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x/y2"
		    Ports		    [2, 1]
		    Position		    [205, 390, 245, 450]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x/y2"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [595, 178, 625, 192]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "x+y1"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x.*y"
		    SrcPort		    1
		    Points		    [10, 0; 0, -40]
		    DstBlock		    "x+y1"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "x/y"
		    SrcPort		    1
		    Points		    [65, 0; 0, 90]
		    DstBlock		    "x+y1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x+y"
		    SrcPort		    1
		    Points		    [20, 0; 0, -155]
		    DstBlock		    "x.*y"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "x/y1"
		    SrcPort		    1
		    Points		    [175, 0]
		    DstBlock		    "x.*y"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x/y2"
		    SrcPort		    1
		    Points		    [40, 0; 0, 5]
		    DstBlock		    "x+y"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "p5"
		    SrcPort		    1
		    Points		    [35, 0; 0, -45]
		    DstBlock		    "x/y2"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "p4"
		    SrcPort		    1
		    Points		    [35, 0; 0, 35]
		    DstBlock		    "x/y2"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "p3"
		    SrcPort		    1
		    Points		    [40, 0; 0, -50]
		    DstBlock		    "x/y1"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "p2"
		    SrcPort		    1
		    Points		    [45, 0; 0, 25]
		    DstBlock		    "x/y1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "p1"
		    SrcPort		    1
		    Points		    [105, 0; 0, 50; 110, 0]
		    DstBlock		    "x/y"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "unity"
		    SrcPort		    1
		    Points		    [20, 0; 0, 10]
		    Branch {
		    Points		    [0, 330]
		    DstBlock		    "x+y"
		    DstPort		    1
		    }
		    Branch {
		    DstBlock		    "x/y"
		    DstPort		    1
		    }
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "set"
		  Tag			  "method ao"
		  Description		  "params=plist('NAME', 'test-mass noise', 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', [], []) ], 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203010852429))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203010852429))], 'XUNITS', 'Hz', 'YUNITS', 'm^2s^{-4}/Hz');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,1,1];"
		  Ports			  [1, 1]
		  Position		  [380, 100, 440, 160]
		  BackgroundColor	  "red"
		  AttributesFormatString  "test-mass noise\\nHz\\nm^2s^{-4}/Hz"
		  AncestorBlock		  "ltpda_library/Methods/ao/Helper/set"
		  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  MaskDescription	  "  SET set an analysis object property.\n \n "
		  MaskDisplay		  "disp('set')"
		  MaskIconFrame		  on
		  MaskIconOpaque	  on
		  MaskIconRotate	  "none"
		  MaskIconUnits		  "pixels"
		  System {
		    Name		    "set"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "set"
		    Tag			    "set"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "set"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "set"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x.*y"
		  Ports			  [2, 1]
		  Position		  [295, 100, 335, 160]
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "x.*y"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "x/y"
		  Ports			  [2, 1]
		  Position		  [190, 65, 230, 125]
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "x/y"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		  }
		}
		Block {
		  BlockType		  SubSystem
		  Name			  "zeros"
		  Ports			  [1, 1]
		  Position		  [80, 25, 120, 85]
		  MinAlgLoopOccurrences	  off
		  RTWSystemCode		  "Auto"
		  FunctionWithSeparateData off
		  System {
		    Name		    "zeros"
		    Location		    [151, 333, 1036, 909]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Position		    [25, 53, 55, 67]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "unity"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', 1);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [400, 25, 460, 85]
		    BackgroundColor	    "cyan"
		    AttributesFormatString  "1"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "unity"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x+y"
		    Ports		    [2, 1]
		    Position		    [525, 380, 565, 440]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x+y"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x+y1"
		    Ports		    [2, 1]
		    Position		    [765, 210, 805, 270]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x+y1"
		    Location		    [968, 538, 1223, 665]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "plus"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/plus"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  PLUS implements addition operator for two analysis objects.\n \n "
		    MaskDisplay		    "disp('plus')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "plus"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "plus"
		    Tag			    "plus"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "plus"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "plus"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x.*y"
		    Ports		    [2, 1]
		    Position		    [655, 365, 695, 425]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x.*y"
		    Location		    [1095, 515, 1350, 642]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "times"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [115, 35, 175, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/times"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  TIMES overloads .* operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('times')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "times"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "times"
		    Tag			    "times"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [200, 58, 230, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "times"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "times"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x/y"
		    Ports		    [2, 1]
		    Position		    [545, 60, 585, 120]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x/y"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x/y1"
		    Ports		    [2, 1]
		    Position		    [350, 175, 390, 235]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x/y1"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "x/y2"
		    Ports		    [2, 1]
		    Position		    [350, 395, 390, 455]
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    System {
		    Name		    "x/y2"
		    Location		    [1102, 155, 1387, 282]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "x"
		    Position		    [25, 38, 55, 52]
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Inport
		    Name		    "y"
		    Position		    [25, 73, 55, 87]
		    Port		    "2"
		    IconDisplay		    "Port number"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Tag			    "mux"
		    Ports		    [2, 1]
		    Position		    [80, 25, 85, 100]
		    BackgroundColor	    "[0.752941, 0.752941, 0.752941]"
		    Inputs		    "2"
		    DisplayOption	    "bar"
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "rdivide"
		    Tag			    "method ao"
		    Description		    "params=plist();noParamsReq=1;"
		    Ports		    [1, 1]
		    Position		    [145, 35, 205, 95]
		    BackgroundColor	    "red"
		    AncestorBlock	    "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
		    MaskDisplay		    "disp('rdivide')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "rdivide"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "In1"
		    Position		    [55, 63, 85, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "rdivide"
		    Tag			    "rdivide"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "In1"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [230, 58, 260, 72]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "y"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "rdivide"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "rdivide"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z1"
		    Tag			    "method ao"
		    Description		    "params=plist('FSFCN', '(1 + (f./100).^2)', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		    Ports		    [1, 1]
		    Position		    [175, 40, 235, 100]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "(1 + (f./100).^2)\\n-->"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z1"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z2"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', '1 + (3e-3/1e-6).^2');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [175, 140, 235, 200]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "1 + (3e-3/1e-6).^2"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z2"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z3"
		    Tag			    "method ao"
		    Description		    "params=plist('FSFCN', '(1 + (f./1e-6).^2)', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		    Ports		    [1, 1]
		    Position		    [175, 240, 235, 300]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "(1 + (f./1e-6).^2)\\n-->"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z3"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z4"
		    Tag			    "method ao"
		    Description		    "params=plist('VALS', '1 + (0.1e-3./0.1e-6).^2');paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
		    Ports		    [0, 1]
		    Position		    [170, 345, 230, 405]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "1 + (0.1e-3./0.1e-6).^2"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z4"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Position		    [55, 55, 85, 85]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    SubSystem
		    Name		    "z5"
		    Tag			    "method ao"
		    Description		    "params=plist('FSFCN', '(1 + (f./0.1e-6).^2)', 'F1', 1.0000000000000001e-009, 'F2', 100, 'NF', 1000, 'SCALE', 'log', 'F', '-->');paramEnabled=[1,0,0,0,0,1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 6);"
		    Ports		    [1, 1]
		    Position		    [165, 450, 225, 510]
		    BackgroundColor	    "orange"
		    AttributesFormatString  "(1 + (f./0.1e-6).^2)\\n-->"
		    AncestorBlock	    "ltpda_library/Methods/ao/Constructor/ao"
		    MinAlgLoopOccurrences   off
		    RTWSystemCode	    "Auto"
		    FunctionWithSeparateData off
		    MaskDescription	    "  AO analysis object class constructor.\n \n "
		    MaskDisplay		    "disp('ao')"
		    MaskIconFrame	    on
		    MaskIconOpaque	    on
		    MaskIconRotate	    "none"
		    MaskIconUnits	    "pixels"
		    System {
		    Name		    "z5"
		    Location		    [365, 256, 716, 430]
		    Open		    off
		    ModelBrowserVisibility  off
		    ModelBrowserWidth	    200
		    ScreenColor		    "white"
		    PaperOrientation	    "landscape"
		    PaperPositionMode	    "auto"
		    PaperType		    "A4"
		    PaperUnits		    "inches"
		    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
		    TiledPageScale	    1
		    ShowPageBoundaries	    off
		    ZoomFactor		    "100"
		    Block {
		    BlockType		    Inport
		    Name		    "f"
		    Tag			    "2"
		    Position		    [15, 40, 35, 60]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Constant
		    Name		    "Constant"
		    Tag			    "1"
		    Position		    [15, 15, 35, 35]
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Block {
		    BlockType		    Mux
		    Name		    "Mux"
		    Ports		    [2, 1]
		    Position		    [70, 19, 75, 161]
		    Inputs		    "2"
		    }
		    Block {
		    BlockType		    "M-S-Function"
		    Name		    "ao"
		    Tag			    "ao"
		    Ports		    [1, 1]
		    Position		    [130, 54, 230, 86]
		    BackgroundColor	    "red"
		    FunctionName	    "ltpdasim"
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [255, 63, 285, 77]
		    IconDisplay		    "Port number"
		    OutDataType		    "sfix(16)"
		    OutScaling		    "2^0"
		    }
		    Line {
		    SrcBlock		    "Mux"
		    SrcPort		    1
		    DstBlock		    "ao"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "Constant"
		    SrcPort		    1
		    DstBlock		    "Mux"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "ao"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    }
		    }
		    Block {
		    BlockType		    Outport
		    Name		    "Out1"
		    Position		    [830, 233, 860, 247]
		    IconDisplay		    "Port number"
		    }
		    Line {
		    SrcBlock		    "x+y1"
		    SrcPort		    1
		    DstBlock		    "Out1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "f"
		    SrcPort		    1
		    Points		    [50, 0; 0, 10]
		    Branch {
		    Points		    [0, 200]
		    Branch {
		    Points		    [0, 210]
		    DstBlock		    "z5"
		    DstPort		    1
		    }
		    Branch {
		    DstBlock		    "z3"
		    DstPort		    1
		    }
		    }
		    Branch {
		    DstBlock		    "z1"
		    DstPort		    1
		    }
		    }
		    Line {
		    SrcBlock		    "x.*y"
		    SrcPort		    1
		    Points		    [30, 0; 0, -140]
		    DstBlock		    "x+y1"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "x/y"
		    SrcPort		    1
		    Points		    [85, 0; 0, 135]
		    DstBlock		    "x+y1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x/y1"
		    SrcPort		    1
		    Points		    [245, 0]
		    DstBlock		    "x.*y"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "x+y"
		    SrcPort		    1
		    DstBlock		    "x.*y"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "x/y2"
		    SrcPort		    1
		    DstBlock		    "x+y"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "z5"
		    SrcPort		    1
		    Points		    [55, 0; 0, -40]
		    DstBlock		    "x/y2"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "z4"
		    SrcPort		    1
		    Points		    [50, 0; 0, 35]
		    DstBlock		    "x/y2"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "z3"
		    SrcPort		    1
		    Points		    [50, 0; 0, -50]
		    DstBlock		    "x/y1"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "z2"
		    SrcPort		    1
		    Points		    [50, 0; 0, 20]
		    DstBlock		    "x/y1"
		    DstPort		    1
		    }
		    Line {
		    SrcBlock		    "z1"
		    SrcPort		    1
		    Points		    [145, 0; 0, 45; 145, 0]
		    DstBlock		    "x/y"
		    DstPort		    2
		    }
		    Line {
		    SrcBlock		    "unity"
		    SrcPort		    1
		    Points		    [10, 0; 0, 20; 15, 0]
		    Branch {
		    Points		    [0, 320]
		    DstBlock		    "x+y"
		    DstPort		    1
		    }
		    Branch {
		    DstBlock		    "x/y"
		    DstPort		    1
		    }
		    }
		  }
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [475, 123, 505, 137]
		  IconDisplay		  "Port number"
		}
		Line {
		  SrcBlock		  "set"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "x.*y"
		  SrcPort		  1
		  DstBlock		  "set"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "f"
		  SrcPort		  1
		  DstBlock		  "zeros"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "gain"
		  SrcPort		  1
		  Points		  [15, 0; 0, -55]
		  DstBlock		  "x.*y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "x/y"
		  SrcPort		  1
		  Points		  [20, 0; 0, 20]
		  DstBlock		  "x.*y"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "poles"
		  SrcPort		  1
		  Points		  [25, 0; 0, -35]
		  DstBlock		  "x/y"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "zeros"
		  SrcPort		  1
		  Points		  [25, 0; 0, 25]
		  DstBlock		  "x/y"
		  DstPort		  1
		}
	      }
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "delta"
	  Ports			  [0, 1]
	  Position		  [380, 85, 440, 125]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "A constant AO that has the value of omega_1 for MDC1."
	  MaskHelp		  "Note: this is not omega_1^2."
	  MaskDisplay		  "disp('delta')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "delta"
	    Location		    [300, 119, 575, 257]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      SubSystem
	      Name		      "ao"
	      Tag		      "method ao"
	      Description	      "params=plist('VALS', -0.0001);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
	      Ports		      [0, 1]
	      Position		      [25, 25, 85, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "VALS -0.0001"
	      AncestorBlock	      "ltpda_library/Methods/ao/Constructor/ao"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  AO analysis object class constructor.\n \n "
	      MaskDisplay	      "disp('ao')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"ao"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Constant
		  Name			  "Constant"
		  Position		  [55, 55, 85, 85]
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "ao"
		  Tag			  "ao"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "Constant"
		  SrcPort		  1
		  DstBlock		  "ao"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "ao"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "set"
	      Tag		      "method ao"
	      Description	      "params=plist('NAME', '\\delta', 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', plist(), []) ], 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'XUNITS', '', 'YUNITS', '');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,0,0];"
	      Ports		      [1, 1]
	      Position		      [135, 25, 195, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "NAME \\delta"
	      AncestorBlock	      "ltpda_library/Methods/ao/Helper/set"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  SET set an analysis object property.\n \n "
	      MaskDisplay	      "disp('set')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"set"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "set"
		  Tag			  "set"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "set"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "set"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [220, 48, 250, 62]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "set"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "ao"
	      SrcPort		      1
	      DstBlock		      "set"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "omega1"
	  Ports			  [0, 1]
	  Position		  [280, 85, 340, 125]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "A constant AO that has the value of omega_1 for MDC1."
	  MaskHelp		  "Note: this is not omega_1^2."
	  MaskDisplay		  "disp('w1')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "omega1"
	    Location		    [300, 119, 575, 257]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      SubSystem
	      Name		      "ao"
	      Tag		      "method ao"
	      Description	      "params=plist('VALS', -0.001140175425099138);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
	      Ports		      [0, 1]
	      Position		      [25, 25, 85, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "-0.0011402"
	      AncestorBlock	      "ltpda_library/Methods/ao/Constructor/ao"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  AO analysis object class constructor.\n \n "
	      MaskDisplay	      "disp('ao')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"ao"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Constant
		  Name			  "Constant"
		  Position		  [55, 55, 85, 85]
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "ao"
		  Tag			  "ao"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "Constant"
		  SrcPort		  1
		  DstBlock		  "ao"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "ao"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "set"
	      Tag		      "method ao"
	      Description	      "params=plist('NAME', '\\omega_1', 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', plist(), []) ], 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'XUNITS', '', 'YUNITS', '');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,0,0];"
	      Ports		      [1, 1]
	      Position		      [135, 25, 195, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "\\omega_1"
	      AncestorBlock	      "ltpda_library/Methods/ao/Helper/set"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  SET set an analysis object property.\n \n "
	      MaskDisplay	      "disp('set')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"set"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "set"
		  Tag			  "set"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "set"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "set"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [220, 48, 250, 62]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "set"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "ao"
	      SrcPort		      1
	      DstBlock		      "set"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "omega3"
	  Ports			  [0, 1]
	  Position		  [280, 152, 340, 188]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "A constant AO that has the value of omega_3 for MDC1."
	  MaskHelp		  "A constant AO that has the value of omega_3 for MDC1.\n\nNote: this is not omega_3^2\n\nThis is equivalent to the variable omega_2 in Stefano's technical note."
	  MaskDisplay		  "disp('w3')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "omega3"
	    Location		    [1307, 403, 1582, 530]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      SubSystem
	      Name		      "ao"
	      Tag		      "method ao"
	      Description	      "params=plist('VALS', -0.001414213562373095);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
	      Ports		      [0, 1]
	      Position		      [25, 25, 85, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "-0.0014142"
	      AncestorBlock	      "ltpda_library/Methods/ao/Constructor/ao"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  AO analysis object class constructor.\n \n "
	      MaskDisplay	      "disp('ao')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"ao"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Constant
		  Name			  "Constant"
		  Position		  [55, 55, 85, 85]
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "ao"
		  Tag			  "ao"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "ao"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Constant"
		  SrcPort		  1
		  DstBlock		  "ao"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "set"
	      Tag		      "method ao"
	      Description	      "params=plist('NAME', '\\omega_3', 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', plist(), []) ], 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203091305861))], 'XUNITS', '', 'YUNITS', '');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,0,0];"
	      Ports		      [1, 1]
	      Position		      [135, 25, 195, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "\\omega_3"
	      AncestorBlock	      "ltpda_library/Methods/ao/Helper/set"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  SET set an analysis object property.\n \n "
	      MaskDisplay	      "disp('set')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"set"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "set"
		  Tag			  "set"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "set"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "set"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [220, 48, 250, 62]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "ao"
	      SrcPort		      1
	      DstBlock		      "set"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "set"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Annotation {
	  Name			  "Various bits and pieces used in MDC1"
	  Position		  [191, 23]
	  DropShadow		  on
	  FontSize		  14
	}
      }
    }
    Block {
      BlockType		      SubSystem
      Name		      "Make o1xx\nprediction"
      Ports		      [5, 1]
      Position		      [235, 144, 310, 216]
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      System {
	Name			"Make o1xx\nprediction"
	Location		[487, 500, 1062, 761]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"A4"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  Inport
	  Name			  "o_nxx"
	  Position		  [30, 18, 60, 32]
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Inport
	  Name			  "Sdfxx"
	  Position		  [30, 48, 60, 62]
	  Port			  "2"
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Inport
	  Name			  "A_1xx"
	  Position		  [85, 93, 115, 107]
	  Port			  "3"
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Inport
	  Name			  "A_Nxx"
	  Position		  [90, 153, 120, 167]
	  Port			  "4"
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Inport
	  Name			  "Sw1xx"
	  Position		  [25, 215, 55, 230]
	  Orientation		  "up"
	  Port			  "5"
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "set"
	  Tag			  "method ao"
	  Description		  "params=plist('NAME', 'o1xx_pred', 'DATA', tsdata(), 'HIST', [history('None', '$Id: history.m,v 1.19 2008/02/13 10:13:53 ingo Exp $', plist(), []) ], 'PROVENANCE', provenance('Recreated from:Recreated from:Martin Hewitson') , 'DESCRIPTION', '', 'MFILE', { '' }, 'MFILENAME', '', 'MDLFILE', '', 'MDLFILENAME', '', 'PLIST', '', 'VERSION', '', 'CREATED', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203349525693))], 'FS', [], 'T0', [ time(plist('TIMEFORMAT', 'yyyy-mm-dd HH:MM:SS.FFF', 'TIMEZONE', 'UTC', 'UTC_EPOCH_MILLI', 1203349525709))], 'XUNITS', '', 'YUNITS', '');paramEnabled=[1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0];"
	  Ports			  [1, 1]
	  Position		  [420, 97, 450, 133]
	  BackgroundColor	  "red"
	  AttributesFormatString  "NAME o1xx_pred"
	  AncestorBlock		  "ltpda_library/Methods/ao/Helper/set"
	  OpenFcn		  "figure(findobj('Tag','LTPDAGUI'))"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "  SET set an analysis object property.\n \n "
	  MaskDisplay		  "disp('set')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "pixels"
	  System {
	    Name		    "set"
	    Location		    [546, 498, 897, 672]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [55, 63, 85, 77]
	      IconDisplay	      "Port number"
	      OutDataType	      "sfix(16)"
	      OutScaling	      "2^0"
	    }
	    Block {
	      BlockType		      "M-S-Function"
	      Name		      "set"
	      Tag		      "set"
	      Ports		      [1, 1]
	      Position		      [130, 54, 230, 86]
	      BackgroundColor	      "red"
	      FunctionName	      "ltpdasim"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [260, 63, 290, 77]
	      IconDisplay	      "Port number"
	      OutDataType	      "sfix(16)"
	      OutScaling	      "2^0"
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "set"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "set"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x+y"
	  Ports			  [2, 1]
	  Position		  [285, 62, 325, 98]
	  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input plus. Just calls plus under the hood."
	  MaskDisplay		  "disp('+')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x+y"
	    Location		    [968, 538, 1223, 665]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "plus"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [115, 35, 175, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/plus"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  PLUS implements addition operator for two analysis objects.\n \n "
	      MaskDisplay	      "disp('plus')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"plus"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "plus"
		  Tag			  "plus"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "plus"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "plus"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [200, 58, 230, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "plus"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "plus"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x+y1"
	  Ports			  [2, 1]
	  Position		  [355, 97, 395, 133]
	  AncestorBlock		  "ltpda_library_mrh/operators/x+y"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input plus. Just calls plus under the hood."
	  MaskDisplay		  "disp('+')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x+y1"
	    Location		    [968, 538, 1223, 665]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "plus"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [115, 35, 175, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/plus"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  PLUS implements addition operator for two analysis objects.\n \n "
	      MaskDisplay	      "disp('plus')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"plus"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "plus"
		  Tag			  "plus"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "plus"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "plus"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [200, 58, 230, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "plus"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "plus"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x.*y"
	  Ports			  [2, 1]
	  Position		  [135, 27, 175, 63]
	  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input element multiply. Just calls times under the hood."
	  MaskDisplay		  "disp('.*')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x.*y"
	    Location		    [1095, 515, 1350, 642]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "times"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [115, 35, 175, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/times"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  TIMES overloads .* operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('times')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"times"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "times"
		  Tag			  "times"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "times"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "times"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [200, 58, 230, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "times"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "times"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x.*y1"
	  Ports			  [2, 1]
	  Position		  [140, 92, 180, 128]
	  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input element multiply. Just calls times under the hood."
	  MaskDisplay		  "disp('.*')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x.*y1"
	    Location		    [1095, 515, 1350, 642]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "times"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [115, 35, 175, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/times"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  TIMES overloads .* operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('times')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"times"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "times"
		  Tag			  "times"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "times"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "times"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [200, 58, 230, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "times"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "times"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x.*y2"
	  Ports			  [2, 1]
	  Position		  [145, 152, 185, 188]
	  AncestorBlock		  "ltpda_library_mrh/operators/x.*y"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input element multiply. Just calls times under the hood."
	  MaskDisplay		  "disp('.*')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x.*y2"
	    Location		    [1095, 515, 1350, 642]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "times"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [115, 35, 175, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/times"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  TIMES overloads .* operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('times')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"times"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "times"
		  Tag			  "times"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "times"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "times"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [200, 58, 230, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "times"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "times"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x/y"
	  Ports			  [2, 1]
	  Position		  [210, 102, 250, 138]
	  AncestorBlock		  "ltpda_library_mrh/operators/x//y"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input divide. Just calls rdivide under the hood."
	  MaskDisplay		  "disp('./')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x/y"
	    Location		    [1102, 155, 1387, 282]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "rdivide"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [145, 35, 205, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('rdivide')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"rdivide"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "rdivide"
		  Tag			  "rdivide"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "rdivide"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "rdivide"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [230, 58, 260, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "rdivide"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "rdivide"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x/y1"
	  Ports			  [2, 1]
	  Position		  [210, 167, 250, 203]
	  AncestorBlock		  "ltpda_library_mrh/operators/x//y"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input divide. Just calls rdivide under the hood."
	  MaskDisplay		  "disp('./')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x/y1"
	    Location		    [1102, 155, 1387, 282]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "rdivide"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [145, 35, 205, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('rdivide')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"rdivide"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "rdivide"
		  Tag			  "rdivide"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "rdivide"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "rdivide"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [230, 58, 260, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "rdivide"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "rdivide"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  Outport
	  Name			  "o1xx_pred"
	  Position		  [480, 108, 510, 122]
	  BackgroundColor	  "[0.752941, 0.752941, 0.752941]"
	  IconDisplay		  "Port number"
	  OutDataType		  "sfix(16)"
	  OutScaling		  "2^0"
	}
	Line {
	  SrcBlock		  "set"
	  SrcPort		  1
	  DstBlock		  "o1xx_pred"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "A_Nxx"
	  SrcPort		  1
	  DstBlock		  "x.*y2"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "A_1xx"
	  SrcPort		  1
	  DstBlock		  "x.*y1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "o_nxx"
	  SrcPort		  1
	  Points		  [0, 10]
	  DstBlock		  "x.*y"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Sdfxx"
	  SrcPort		  1
	  Points		  [15, 0]
	  Branch {
	    Points		    [0, 65]
	    Branch {
	      Points		      [0, 60]
	      DstBlock		      "x.*y2"
	      DstPort		      2
	    }
	    Branch {
	      DstBlock		      "x.*y1"
	      DstPort		      2
	    }
	  }
	  Branch {
	    DstBlock		    "x.*y"
	    DstPort		    2
	  }
	}
	Line {
	  SrcBlock		  "x+y1"
	  SrcPort		  1
	  DstBlock		  "set"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "x/y1"
	  SrcPort		  1
	  Points		  [15, 0; 0, -60]
	  DstBlock		  "x+y1"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "x+y"
	  SrcPort		  1
	  Points		  [0, 25]
	  DstBlock		  "x+y1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "x/y"
	  SrcPort		  1
	  Points		  [5, 0; 0, -30]
	  DstBlock		  "x+y"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "x.*y"
	  SrcPort		  1
	  Points		  [45, 0; 0, 25]
	  DstBlock		  "x+y"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "x.*y2"
	  SrcPort		  1
	  Points		  [0, 5]
	  DstBlock		  "x/y1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Sw1xx"
	  SrcPort		  1
	  Points		  [0, -15]
	  Branch {
	    Points		    [0, -65]
	    DstBlock		    "x/y"
	    DstPort		    2
	  }
	  Branch {
	    DstBlock		    "x/y1"
	    DstPort		    2
	  }
	}
	Line {
	  SrcBlock		  "x.*y1"
	  SrcPort		  1
	  DstBlock		  "x/y"
	  DstPort		  1
	}
      }
    }
    Block {
      BlockType		      SubSystem
      Name		      "Signal Processing"
      Ports		      []
      Position		      [265, 40, 317, 88]
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      System {
	Name			"Signal Processing"
	Location		[1301, 693, 1696, 979]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"A4"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  SubSystem
	  Name			  "lcpsd"
	  Tag			  "function"
	  Description		  "params=plist('KDES', 100, 'JDES', 1000, 'KMIN', 2, 'WIN', specwin('Kaiser', 1, 150), 'NOLAP', -1, 'ORDER', 0);"
	  Ports			  [1, 1]
	  Position		  [35, 161, 95, 209]
	  BackgroundColor	  "magenta"
	  DropShadow		  on
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "LTPDA_LCPSD makes cross spectral density estimates \nof the time-series objects in the input analysis objects \non a log frequency axis."
	  MaskDisplay		  "disp('LCPSD')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "pixels"
	  System {
	    Name		    "lcpsd"
	    Location		    [565, 222, 780, 325]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 38, 55, 52]
	      BackgroundColor	      "black"
	      IconDisplay	      "Port number"
	      OutDataType	      "sfix(16)"
	      OutScaling	      "2^0"
	    }
	    Block {
	      BlockType		      "M-S-Function"
	      Name		      "ltpda_lcpsd"
	      Tag		      "ltpda_lcpsd"
	      Ports		      [1, 1]
	      Position		      [80, 29, 135, 61]
	      BackgroundColor	      "red"
	      FunctionName	      "ltpdasim"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [160, 38, 190, 52]
	      BackgroundColor	      "black"
	      IconDisplay	      "Port number"
	      OutDataType	      "sfix(16)"
	      OutScaling	      "2^0"
	    }
	    Line {
	      SrcBlock		      "ltpda_lcpsd"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "ltpda_lcpsd"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "lpsd"
	  Tag			  "function"
	  Ports			  [1, 1]
	  Position		  [35, 76, 95, 124]
	  BackgroundColor	  "magenta"
	  DropShadow		  on
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "LTPDA_LPSD makes power spectral density estimates \nof the time-series objects in the input analysis objects \non a log frequency axis."
	  MaskDisplay		  "disp('LPSD')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "pixels"
	  System {
	    Name		    "lpsd"
	    Location		    [565, 222, 780, 325]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 38, 55, 52]
	      BackgroundColor	      "black"
	      IconDisplay	      "Port number"
	      OutDataType	      "sfix(16)"
	      OutScaling	      "2^0"
	    }
	    Block {
	      BlockType		      "M-S-Function"
	      Name		      "ltpda_lpsd"
	      Tag		      "ltpda_lpsd"
	      Ports		      [1, 1]
	      Position		      [80, 29, 135, 61]
	      BackgroundColor	      "red"
	      FunctionName	      "ltpdasim"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [160, 38, 190, 52]
	      BackgroundColor	      "black"
	      IconDisplay	      "Port number"
	      OutDataType	      "sfix(16)"
	      OutScaling	      "2^0"
	    }
	    Line {
	      SrcBlock		      "ltpda_lpsd"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "ltpda_lpsd"
	      DstPort		      1
	    }
	  }
	}
	Annotation {
	  Name			  "Other Signal Processing blocks which are (maybe) not\nin the main library."
	  Position		  [190, 29]
	  DropShadow		  on
	  FontSize		  14
	}
      }
    }
    Block {
      BlockType		      SubSystem
      Name		      "helper"
      Ports		      []
      Position		      [160, 35, 215, 87]
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      System {
	Name			"helper"
	Location		[1007, 493, 1541, 882]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"A4"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  SubSystem
	  Name			  "get x"
	  Ports			  [1, 1]
	  Position		  [190, 99, 245, 151]
	  BackgroundColor	  "magenta"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Extract the X vector from an AO."
	  MaskHelp		  "Extract the X vector from an AO."
	  MaskDisplay		  "disp('getX')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "get x"
	    Location		    [603, 157, 903, 295]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "ao"
	      Position		      [25, 48, 55, 62]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "get"
	      Tag		      "method ao"
	      Description	      "params=plist('PROPERTY', 'data');paramEnabled=[1];"
	      Ports		      [1, 1]
	      Position		      [80, 25, 140, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "PROPERTY data"
	      AncestorBlock	      "ltpda_library/Methods/ao/Helper/get"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  GET get ao properties.\n \n "
	      MaskDisplay	      "disp('get')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"get"
		Location		[546, 498, 897, 672]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "get"
		  Tag			  "get"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [260, 63, 290, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "get"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "get"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "get1"
	      Tag		      "method ao"
	      Description	      "params=plist('PROPERTY', 'x');paramEnabled=[1];"
	      Ports		      [1, 1]
	      Position		      [160, 25, 220, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "PROPERTY x"
	      AncestorBlock	      "ltpda_library/Methods/ao/Helper/get"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  GET get ao properties.\n \n "
	      MaskDisplay	      "disp('get')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"get1"
		Location		[546, 498, 897, 672]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "get"
		  Tag			  "get"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [260, 63, 290, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "get"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "get"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "x"
	      Position		      [245, 48, 275, 62]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "get1"
	      SrcPort		      1
	      DstBlock		      "x"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "ao"
	      SrcPort		      1
	      DstBlock		      "get"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "get"
	      SrcPort		      1
	      DstBlock		      "get1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "get y"
	  Ports			  [1, 1]
	  Position		  [75, 94, 130, 146]
	  BackgroundColor	  "magenta"
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Extract the Y vector from an AO."
	  MaskHelp		  "Extract the Y vector from an AO."
	  MaskDisplay		  "disp('getY')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "get y"
	    Location		    [603, 157, 903, 295]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "ao"
	      Position		      [25, 48, 55, 62]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "get"
	      Tag		      "method ao"
	      Description	      "params=plist('PROPERTY', 'data');paramEnabled=[1];"
	      Ports		      [1, 1]
	      Position		      [80, 25, 140, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "PROPERTY data"
	      AncestorBlock	      "ltpda_library/Methods/ao/Helper/get"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  GET get ao properties.\n \n "
	      MaskDisplay	      "disp('get')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"get"
		Location		[546, 498, 897, 672]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "get"
		  Tag			  "get"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [260, 63, 290, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "get"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "get"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "get1"
	      Tag		      "method ao"
	      Description	      "params=plist('PROPERTY', 'y');paramEnabled=[1];"
	      Ports		      [1, 1]
	      Position		      [160, 25, 220, 85]
	      BackgroundColor	      "red"
	      AttributesFormatString  "PROPERTY y"
	      AncestorBlock	      "ltpda_library/Methods/ao/Helper/get"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  GET get ao properties.\n \n "
	      MaskDisplay	      "disp('get')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"get1"
		Location		[546, 498, 897, 672]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "get"
		  Tag			  "get"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [260, 63, 290, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "get"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "get"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "y"
	      Position		      [245, 48, 275, 62]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "get1"
	      SrcPort		      1
	      DstBlock		      "y"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "ao"
	      SrcPort		      1
	      DstBlock		      "get"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "get"
	      SrcPort		      1
	      DstBlock		      "get1"
	      DstPort		      1
	    }
	  }
	}
	Annotation {
	  Name			  "More useful high-level helper blocks"
	  Position		  [224, 21]
	  DropShadow		  on
	  FontSize		  14
	}
      }
    }
    Block {
      BlockType		      SubSystem
      Name		      "operators"
      Ports		      []
      Position		      [75, 33, 125, 85]
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      System {
	Name			"operators"
	Location		[1230, 630, 1793, 1020]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"A4"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  SubSystem
	  Name			  "square"
	  Ports			  [1, 1]
	  Position		  [55, 193, 95, 237]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Square the input AO."
	  MaskHelp		  "Square the input AO."
	  MaskDisplay		  "disp('x^2')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "square"
	    Location		    [517, 562, 812, 750]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [45, 38, 75, 52]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      IconDisplay	      "Port number"
	      OutDataType	      "sfix(16)"
	      OutScaling	      "2^0"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [115, 25, 120, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "ao"
	      Tag		      "method ao"
	      Description	      "params=plist('VALS', 2);paramEnabled=[1];paramSets=plist('SETS', { 'From XML file', 'From ASCII file', 'Function', 'Values', 'Time-series Function', 'Frequency-series Function', 'From Window', 'Waveform', 'From Repository', 'From Plist' }, 'CURRSET', 4);"
	      Ports		      [0, 1]
	      Position		      [25, 75, 85, 135]
	      BackgroundColor	      "red"
	      AttributesFormatString  "VALS 2"
	      AncestorBlock	      "ltpda_library/Methods/ao/Constructor/ao"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  AO analysis object class constructor.\n \n "
	      MaskDisplay	      "disp('ao')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"ao"
		Location		[164, 470, 515, 644]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Constant
		  Name			  "Constant"
		  Position		  [55, 55, 85, 85]
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "ao"
		  Tag			  "ao"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "Constant"
		  SrcPort		  1
		  DstBlock		  "ao"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "ao"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "power"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [155, 35, 215, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/power"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  POWER implements power operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('power')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"power"
		Location		[546, 498, 897, 672]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "power"
		  Tag			  "power"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [260, 63, 290, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "power"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "power"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "x^2"
	      Position		      [240, 58, 270, 72]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      IconDisplay	      "Port number"
	      OutDataType	      "sfix(16)"
	      OutScaling	      "2^0"
	    }
	    Line {
	      SrcBlock		      "power"
	      SrcPort		      1
	      DstBlock		      "x^2"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "power"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "ao"
	      SrcPort		      1
	      Points		      [5, 0; 0, -25]
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x+y"
	  Ports			  [2, 1]
	  Position		  [60, 122, 100, 158]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input plus. Just calls plus under the hood."
	  MaskDisplay		  "disp('+')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x+y"
	    Location		    [968, 538, 1223, 665]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "plus"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [115, 35, 175, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/plus"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  PLUS implements addition operator for two analysis objects.\n \n "
	      MaskDisplay	      "disp('plus')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"plus"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "plus"
		  Tag			  "plus"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "plus"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "plus"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [200, 58, 230, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "plus"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "plus"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x-y"
	  Ports			  [2, 1]
	  Position		  [125, 122, 165, 158]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input minus. Just calls minus under the hood."
	  MaskDisplay		  "disp('-')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x-y"
	    Location		    [968, 538, 1223, 665]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "minus"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [115, 35, 175, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/minus"
	      OpenFcn		      "figure(findobj('Tag','LTPDAGUI'))"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  MINUS overloads - operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('minus')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"minus"
		Location		[546, 498, 897, 672]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "minus"
		  Tag			  "minus"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [260, 63, 290, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "minus"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "minus"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [200, 58, 230, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "minus"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "minus"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x.*y"
	  Ports			  [2, 1]
	  Position		  [60, 62, 100, 98]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input element multiply. Just calls times under the hood."
	  MaskDisplay		  "disp('.*')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x.*y"
	    Location		    [1095, 515, 1350, 642]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "times"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [115, 35, 175, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/times"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  TIMES overloads .* operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('times')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"times"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "times"
		  Tag			  "times"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "times"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "times"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [200, 58, 230, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "times"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "times"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "x/y"
	  Ports			  [2, 1]
	  Position		  [125, 67, 165, 103]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskDescription	  "Two input divide. Just calls rdivide under the hood."
	  MaskDisplay		  "disp('./')"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "x/y"
	    Location		    [1102, 155, 1387, 282]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "A4"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "x"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "y"
	      Position		      [25, 73, 55, 87]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Tag		      "mux"
	      Ports		      [2, 1]
	      Position		      [80, 25, 85, 100]
	      BackgroundColor	      "[0.752941, 0.752941, 0.752941]"
	      Inputs		      "2"
	      DisplayOption	      "bar"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "rdivide"
	      Tag		      "method ao"
	      Description	      "params=plist();noParamsReq=1;"
	      Ports		      [1, 1]
	      Position		      [145, 35, 205, 95]
	      BackgroundColor	      "red"
	      AncestorBlock	      "ltpda_library/Methods/ao/Arithmetic Operator/rdivide"
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskDescription	      "  RDIVIDE overloads ./ operator for analysis objects.\n \n "
	      MaskDisplay	      "disp('rdivide')"
	      MaskIconFrame	      on
	      MaskIconOpaque	      on
	      MaskIconRotate	      "none"
	      MaskIconUnits	      "pixels"
	      System {
		Name			"rdivide"
		Location		[365, 256, 716, 430]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"A4"
		PaperUnits		"inches"
		TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "In1"
		  Position		  [55, 63, 85, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Block {
		  BlockType		  "M-S-Function"
		  Name			  "rdivide"
		  Tag			  "rdivide"
		  Ports			  [1, 1]
		  Position		  [130, 54, 230, 86]
		  BackgroundColor	  "red"
		  FunctionName		  "ltpdasim"
		}
		Block {
		  BlockType		  Outport
		  Name			  "Out1"
		  Position		  [255, 63, 285, 77]
		  IconDisplay		  "Port number"
		  OutDataType		  "sfix(16)"
		  OutScaling		  "2^0"
		}
		Line {
		  SrcBlock		  "In1"
		  SrcPort		  1
		  DstBlock		  "rdivide"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "rdivide"
		  SrcPort		  1
		  DstBlock		  "Out1"
		  DstPort		  1
		}
	      }
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [230, 58, 260, 72]
	      IconDisplay	      "Port number"
	    }
	    Line {
	      SrcBlock		      "Mux"
	      SrcPort		      1
	      DstBlock		      "rdivide"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "x"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "rdivide"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "y"
	      SrcPort		      1
	      DstBlock		      "Mux"
	      DstPort		      2
	    }
	  }
	}
	Annotation {
	  Name			  "More useful high-level operators"
	  Position		  [370, 38]
	  DropShadow		  on
	}
      }
    }
  }
}