\section{Results}
\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/abs} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/abs] method works with a vector of objects as input.} & Test that the [ao/abs] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/abs] method works with a matrix of objects as input.} & Test that the [ao/abs] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/abs] method works with a list of objects as input.} & Test that the [ao/abs] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/abs] method works with a mix of different arrays of objects as input.} & Tests that the [ao/abs] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/abs] method properly applies history.} & Test that the result of applying the [ao/abs] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/abs]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/abs] method can modify the input AO.} & Test that the [ao/abs] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/abs] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/abs] method uses the plist to get the axis.} & Test that the [ao/abs] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/abs] method applies to the x-axis
2) Check that the [ao/abs] method applies to the y-axis
3) Check that the [ao/abs] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/abs] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/abs] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/abs] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/abs.}
\label{tab:ao_abs}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/acos} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/acos] method works with a vector of objects as input.} & Test that the [ao/acos] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/acos] method works with a matrix of objects as input.} & Test that the [ao/acos] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/acos] method works with a list of objects as input.} & Test that the [ao/acos] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/acos] method works with a mix of different arrays of objects as input.} & Tests that the [ao/acos] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/acos] method properly applies history.} & Test that the result of applying the [ao/acos] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/acos]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/acos] method can modify the input AO.} & Test that the [ao/acos] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/acos] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/acos] method uses the plist to get the axis.} & Test that the [ao/acos] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/acos] method applies to the x-axis
2) Check that the [ao/acos] method applies to the y-axis
3) Check that the [ao/acos] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/acos] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/acos] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/acos] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/acos.}
\label{tab:ao_acos}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/and} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP cdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{and } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{tests (fsdata and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (AO no data and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and AO no data)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different fs in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x values in fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
\caption{Unit tests for ao/and.}
\label{tab:ao_and}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/angle} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/angle] method works with a vector of objects as input.} & Test that the [ao/angle] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/angle] method works with a matrix of objects as input.} & Test that the [ao/angle] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/angle] method works with a list of objects as input.} & Test that the [ao/angle] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/angle] method works with a mix of different arrays of objects as input.} & Tests that the [ao/angle] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/angle] method properly applies history.} & Test that the result of applying the [ao/angle] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/angle]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/angle] method can modify the input AO.} & Test that the [ao/angle] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/angle] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/angle] method uses the plist to get the axis.} & Test that the [ao/angle] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/angle] method applies to the x-axis
2) Check that the [ao/angle] method applies to the y-axis
3) Check that the [ao/angle] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/angle] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/angle] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/angle] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/angle.}
\label{tab:ao_angle}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/ao} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/ao] method works with a vector of objects as input.} & Test that the [ao/ao] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/ao] method works with a matrix of objects as input.} & Test that the [ao/ao] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/ao] method works with a list of objects as input.} & Test that the [ao/ao] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/ao] method works with a mix of different arrays of objects as input.} & Tests that the [ao/ao] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/ao] method properly applies history.} & Test that the result of applying the [ao/ao] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/ao]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the
ASCII-file constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt objects are the same as 'out1' and 'ouit2' & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the complex
ASCII-file constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the read data are correct
3) Check that the rebuilt object is the same as in 'out1..5' & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the vals constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(fcn) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(vals) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(x/y-vals) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(tsfcn) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(fsfcn) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt objects are the same as 'out1' and 'out2' & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(win) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to 'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(waveform) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt objects are the same as 'out\_...'. & pass \\ \hline
 \multirow{2}{3cm}{23 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(polynomial) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{25 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the plist(pzmodel) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{26 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the data-object constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'. & pass \\ \hline
 \multirow{2}{3cm}{28 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the x-vector, y-vector constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{29 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the filename +
plist constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{30 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the filename +
plist constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check the read data
3) Check that the rebuilt object is the same as 'out' & pass \\ \hline
 \multirow{2}{3cm}{31 } & \multirow{2}{5cm}{Tests that the ao method properly applies history to the filename + plist constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ao'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{60 } & \multirow{2}{5cm}{Tests that the constructor method doesn't apply history to the read
MAT-file constructor.} & Tests that the constructor method doesn't apply history to the read
MAT-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{61 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the read
XML-file constructor.} & Tests that the constructor properly applies history to the read
XML-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{62 } & \multirow{2}{5cm}{Tests that the constructor properly applies history in the struct constructor.} & Tests that the constructor properly applies history in the struct constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{64 } & \multirow{2}{5cm}{Tests that the contructor properly applies history to the
plist(filename) constructor.} & Tests that the contructor properly applies history to the
plist(filename) constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{65 } & \multirow{2}{5cm}{Tests that the contructed object can be submitted and retrieved.} & Tests that the contructed object can be submitted and retrieved. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{66 } & \multirow{2}{5cm}{Tests that the construuctor properly works with the plist(pzmodel)
constructor.} & Tests that the constructor properly works with the plist(pzmodel)
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ssm'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{67 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the
pole/zero model + plist object constructor.} & Tests that the constructor properly applies history to the
pole/zero model + plist object constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{68 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the conn+Id constructor.} & Tests that the constructor properly applies history to the conn+Id
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/ao.}
\label{tab:ao_ao}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/asin} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/asin] method works with a vector of objects as input.} & Test that the [ao/asin] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/asin] method works with a matrix of objects as input.} & Test that the [ao/asin] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/asin] method works with a list of objects as input.} & Test that the [ao/asin] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/asin] method works with a mix of different arrays of objects as input.} & Tests that the [ao/asin] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/asin] method properly applies history.} & Test that the result of applying the [ao/asin] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/asin]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/asin] method can modify the input AO.} & Test that the [ao/asin] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/asin] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/asin] method uses the plist to get the axis.} & Test that the [ao/asin] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/asin] method applies to the x-axis
2) Check that the [ao/asin] method applies to the y-axis
3) Check that the [ao/asin] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/asin] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/asin] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/asin] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/asin.}
\label{tab:ao_asin}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/atan} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/atan] method works with a vector of objects as input.} & Test that the [ao/atan] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/atan] method works with a matrix of objects as input.} & Test that the [ao/atan] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/atan] method works with a list of objects as input.} & Test that the [ao/atan] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/atan] method works with a mix of different arrays of objects as input.} & Tests that the [ao/atan] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/atan] method properly applies history.} & Test that the result of applying the [ao/atan] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/atan]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/atan] method can modify the input AO.} & Test that the [ao/atan] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/atan] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/atan] method uses the plist to get the axis.} & Test that the [ao/atan] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/atan] method applies to the x-axis
2) Check that the [ao/atan] method applies to the y-axis
3) Check that the [ao/atan] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/atan] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/atan] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/atan] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/atan.}
\label{tab:ao_atan}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/atan2} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the atan2 method works only with two AOs as input..} & Tests that the atan2 method works only with two AOs as input.. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the atan2 method properly applies history.} & Test that the result of applying the atan2 method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'atan2'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the atan2 method can not be used as a modifier method.} & Tests that the atan2 method can not be used as a modifier method. The
command should fail. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for ao/atan2.}
\label{tab:ao_atan2}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/average} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the average method works with a vector of AOs as input.} & Tests that the average method works with a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the outputs have exactly one AO
2) Check that the outputs have the correct data.
3) Check the rebuilt objects & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the average method works with a matrix of AOs as input.} & Tests that the average method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the outputs have exactly one AO
2) Check that the outputs have the correct data.
3) Check the rebuilt objects & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the average method works with a list of AOs as input.} & Tests that the average method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the outputs have exactly one AO
2) Check that the outputs have the correct data.
3) Check the rebuilt objects & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the average method works with a mix of different shaped AOs as
input.} & Tests that the average method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO
2) Check that the output have the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/average] method properly applies history.} & Test that the result of applying the [ao/average] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/average]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the average method cannot modify the input AO.
The method must throw an error for the modifier call.} & Test that the average method cannot modify the input AO by calling with
no output & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the average method keeps the data shape of the input
object. The input AO must be an AO with row data and an AO with
column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests that the average method works with a single AO as input.} & Tests that the average method works with a single AO as input. & pass \\ \cline{3-4}
        &    & 1) Check that the outputs have exactly one AO
2) Check that the outputs have the correct data.
3) Check the rebuilt objects & pass \\ \hline
\caption{Unit tests for ao/average.}
\label{tab:ao_average}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf bin/data} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [bin/data] method works with a vector of objects as input.} & Test that the [bin/data] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [bin/data] method works with a matrix of objects as input.} & Test that the [bin/data] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [bin/data] method works with a list of objects as input.} & Test that the [bin/data] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [bin/data] method works with a mix of different arrays of objects as input.} & Tests that the [bin/data] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [bin/data] method properly applies history.} & Test that the result of applying the [bin/data] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[bin/data]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [bin/data] method can modify the input AO.} & Test that the [bin/data] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [bin/data] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [bin/data] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [bin/data] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) rebinning of the PSD data
2) rebinning of the LPSD data
3) compares the units of the input and output} & 1) Rebinning the data & pass \\ \cline{3-4}
        &    & 1) Check that (rebinned PSD yunits) equals (input PSD yunits)
2) Check that (rebinned PSD xunits) equals (input PSD xunits)
3) Check that (rebinned LPSD yunits) equals (input LPSD yunits)
4) Check that (rebinned LPSD xunits) equals (input LPSD xunits) & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests handling of units:
1) rebinning of the PSD data
2) rebinning of the LPSD data
3) compares the units of the input and output} & 1) Rebinning the data & pass \\ \cline{3-4}
        &    & 1) Check that (rebinned PSD yunits) equals (input PSD yunits)
2) Check that (rebinned PSD xunits) equals (input PSD xunits)
3) Check that (rebinned LPSD yunits) equals (input LPSD yunits)
4) Check that (rebinned LPSD xunits) equals (input LPSD xunits) & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests handling of units:
1) rebinning of the PSD data
2) rebinning of the LPSD data
3) compares the units of the input and output} & 1) Rebinning the data & pass \\ \cline{3-4}
        &    & 1) Check that (rebinned PSD yunits) equals (input PSD yunits)
2) Check that (rebinned PSD xunits) equals (input PSD xunits)
3) Check that (rebinned LPSD yunits) equals (input LPSD yunits)
4) Check that (rebinned LPSD xunits) equals (input LPSD xunits) & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests handling of units:
1) rebinning of the PSD data
2) rebinning of the LPSD data} & 1) Rebinning the data & pass \\ \cline{3-4}
        &    & Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests handling of units:
1) rebinning of the PSD data
2) rebinning of the LPSD data} & 1) Rebinning the data & pass \\ \cline{3-4}
        &    & Nothing to check & pass \\ \hline
\caption{Unit tests for bin/data.}
\label{tab:bin_data}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/cat} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/cat] method works with a vector of objects as input.} & Test that the [ao/cat] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/cat] method works with a matrix of objects as input.} & Test that the [ao/cat] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/cat] method works with a list of objects as input.} & Test that the [ao/cat] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/cat] method works with a mix of different arrays of objects as input.} & Tests that the [ao/cat] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{The cat method doesn't apply history.} & The cat method doesn't apply history. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{The cat method can not be used as a modifer method.} & The cat method can not be used as a modifer method. In this case
throws the method an error. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for ao/cat.}
\label{tab:ao_cat}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of AOs as input.} & Test that the char method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of AOs as input.} & Test that the char method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of AOs as input.} & Test that the char method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped AOs as
input.} & Test that the char method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the char method properly applies history.} & The method char doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for ao/char.}
\label{tab:ao_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/cohere} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the cohere method works with a vector of AOs as input.} & Test that the cohere method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Test that the cohere method doesn't work for a matrix of AOs as input.} & Test that the cohere method doesn't work for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the cohere method works with a list of AOs as input (only
two objects).} & Test that the cohere method works for a list of AOs as input. (only
two objects) & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Test that the cohere method doesn't work with an input of matrices
and vectors and single AOs.} & Test that the cohere method doesn't work with an input of matrices
and vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the cohere method properly applies history.} & Test that the result of applying the cohere method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'cohere'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the cohere method can not modify the input AO.} & Test that the cohere method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the plus method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the output data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the cohere method pass back the output objects to a list of
output variables or to a single variable.} & This test is not longer necessary because the cohere method pass back
always only one object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the cohere method agrees with MATLAB's mscohere when
configured to use the same parameters.} & Test that the applying cohere works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's mscohere.
2) Check that the shape of the output data is equal to the input data & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/cohere] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) complex coherence of the white noise series
4) compare C(x,y) with conj(C(y,x))
5) compare C(x,x) and C(y,y) with 1} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) complex coherence of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that C(x,y) equals conj(C(y,x))
2) Check that C(x,x) equals 1
2) Check that C(y,y) equals 1 & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) magnitude-squared coherence of the white noise series
4) compare C(x,y) with C(y,x)
5) compare C(x,x) and C(y,y) with 1} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) magnitude-squared coherence of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that C(x,y) equals C(y,x)
1) Check that C(x,x) equals 1
1) Check that C(y,y) equals 1 & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) complex coherence of the combination of white noise series
4) compare C(x,y) with 1} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) complex coherence of the combination of noise & pass \\ \cline{3-4}
        &    & 1) Check that the complex coherence equals 1 & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) magnitude-squared coherence of the combination of white noise series
4) compare C(x,y) with 1} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) magnitude-squared coherence of the combination of noise & pass \\ \cline{3-4}
        &    & 1) Check that the magnitude-squared coherence equals 1 & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) magnitude-squared coherence M of the combination of white noise series
4) complex coherence C of the combination of white noise series
5) compare abs(C)\^2 with M} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) magnitude-squared coherence of the combination of noise & pass \\ \cline{3-4}
        &    & 1) Check that the magnitude-squared coherence equals the square
modulus of the complex coherence & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) complex coherence of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) complex cohere of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (complex coherence yunits) equals [1]
2) Check that (complex coherence xunits) equals [Hz] & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) magnitude-squared coherence of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) magnitude-squared cohere of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (magnitude-squared coherence yunits) equals [1]
2) Check that (magnitude-squared coherence xunits) equals [Hz] & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests that differently sized data sets are treated properly} & Test that applying cohere works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that cohere used the length of the shortest ao. & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests that applying a single window the coherence is 1} & Test that applying cohere works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the calculated cohere is 1 & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cohere of the noise, without detrending, random window, set number of
averages
3) check the effective number of averages} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) cohere of the noise, without detrending, random window, set number of
averages & pass \\ \cline{3-4}
        &    & 1) Check that calculated navs are identical to those requested & pass \\ \hline
 \multirow{2}{3cm}{22 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from uniform pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cohere of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run cohere again, with the nfft used
6) compare the calculated objects} & 1) white noise produced from uniform pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cohere of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run cohere again, with the nfft used & pass \\ \cline{3-4}
        &    & 1) Check that calculated objects C1 and C2 are identical & pass \\ \hline
 \multirow{2}{3cm}{23 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cohere of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run cohere again, with the nfft used
6) compare navs, nfft, coheres} & 1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cohere of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run cohere again, with the nfft used
6) run cohere again, with conflicting parameters, and verify it uses
nfft rather than navs & pass \\ \cline{3-4}
        &    & 1) Check that calculated objects C1 and C2 are identical
2) Check that C3 used different values & pass \\ \hline
 \multirow{2}{3cm}{24 } & \multirow{2}{5cm}{Tests that the cohere method agrees with MATLAB's mscohere when
configured to use the same parameters.} & Test that the applying cohere works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's mscohere.
2) Check that the shape of the output data is equal to the input data & pass \\ \hline
 \multirow{2}{3cm}{25 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) complex coherence of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) complex cohere of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (complex coherence yunits) equals [1]
2) Check that (complex coherence xunits) equals [Hz] & pass \\ \hline
 \multirow{2}{3cm}{26 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) complex coherence of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) complex cohere of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (complex coherence yunits) equals [1]
2) Check that (complex coherence xunits) equals [Hz] & pass \\ \hline
 \multirow{2}{3cm}{30 } & \multirow{2}{5cm}{Tests handling of special cases:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) the same noise series
3) cohere of the white noise series
4) compares the output to unity} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
the same data as 1) and 2)
4) cohere of the series & pass \\ \cline{3-4}
        &    & 1) Check that calculated cohere equals 1 & pass \\ \hline
\caption{Unit tests for ao/cohere.}
\label{tab:ao_cohere}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/complex} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the complex method works with a vector of AOs as input.} & Test that the complex method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that the output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the complex method works with a list of AOs as input.} & Test that the complex method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that the output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the complex method can not modify the input AO.} & Test that the complex method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/complex] method properly applies history.} & Test that the result of applying the [ao/complex] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/complex]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the complex method keeps the data shape of the first input object.
the input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/complex] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/complex.}
\label{tab:ao_complex}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/compute} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the complex method works with a vector of AOs as input.} & Test that the complex method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the compute method works with a matrix of AOs as input.} & Test that the compute method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 2.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the compute method works with a list of AOs as input.} & Test that the compute method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 2.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the compute method works with a mix of different shaped AOs as
input.} & Test that the compute method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 2.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the compute method applies no history.} & Test that the result of applying the compute method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' is not
'compute'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/compute] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/compute.}
\label{tab:ao_compute}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/conj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/conj] method works with a vector of objects as input.} & Test that the [ao/conj] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/conj] method works with a matrix of objects as input.} & Test that the [ao/conj] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/conj] method works with a list of objects as input.} & Test that the [ao/conj] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/conj] method works with a mix of different arrays of objects as input.} & Tests that the [ao/conj] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/conj] method properly applies history.} & Test that the result of applying the [ao/conj] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/conj]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/conj] method can modify the input AO.} & Test that the [ao/conj] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/conj] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/conj] method uses the plist to get the axis.} & Test that the [ao/conj] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/conj] method applies to the x-axis
2) Check that the [ao/conj] method applies to the y-axis
3) Check that the [ao/conj] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/conj] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/conj] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/conj] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/conj.}
\label{tab:ao_conj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/conv} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the conv method works with a vector of AOs as input.} & Test that the conv method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one Ao with cdata.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the conv method works with a matrix of AOs as input.} & Test that the conv method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one Ao with cdata.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the conv method works with a list of AOs as input.} & Test that the conv method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one Ao with cdata.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the conv method works with a mix of different shaped AOs as
input.} & Test that the conv method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one Ao with cdata.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the conv method properly applies history.} & Test that the result of applying the conv method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'conv'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{The conv method can not modify the input AO.} & The conv method throws an error if it is uesed as a modifier. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/conv] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/conv.}
\label{tab:ao_conv}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/convert} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the convert method works with a vector of AOs as input.} & Test that the convert method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the convert method works with a matrix of AOs as input.} & Test that the convert method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the convert method works with a list of AOs as input.} & Tests that the convert method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the convert method works with a mix of different shaped AOs
as input.} & Tests that the convert method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the convert method properly applies history.} & Test that the result of applying the convert method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'convert'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the convert method can modify the input AO.} & Test that the convert method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the convert value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the convert method can modify the input object depending
to the plist. & pass \\ \cline{3-4}
        &    & 1) Check that the convert method aplpiesthe different actions
4) Check that the rebuilt objects are the same as 'out[1..6]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the convert method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the convert method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/convert] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/convert.}
\label{tab:ao_convert}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for ao/copy.}
\label{tab:ao_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/cos} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/cos] method works with a vector of objects as input.} & Test that the [ao/cos] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/cos] method works with a matrix of objects as input.} & Test that the [ao/cos] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/cos] method works with a list of objects as input.} & Test that the [ao/cos] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/cos] method works with a mix of different arrays of objects as input.} & Tests that the [ao/cos] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/cos] method properly applies history.} & Test that the result of applying the [ao/cos] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/cos]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/cos] method can modify the input AO.} & Test that the [ao/cos] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/cos] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/cos] method uses the plist to get the axis.} & Test that the [ao/cos] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/cos] method applies to the x-axis
2) Check that the [ao/cos] method applies to the y-axis
3) Check that the [ao/cos] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/cos] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/cos] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/cos] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/cos.}
\label{tab:ao_cos}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/cov} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the cov method works with a vector of AOs as input.} & Test that the cov method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one Ao with cdata.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the cov method works with a matrix of AOs as input.} & Test that the cov method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one Ao with cdata.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the cov method works with a list of AOs as input.} & Tests that the cov method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one Ao with cdata.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the cov method works with a mix of different shaped AOs as
input.} & Tests that the cov method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one Ao with cdata.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the cov method properly applies history.} & Test that the result of applying the cov method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'cov'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{The cov method can not modify the input AO.} & The cov method can not modify the input AO. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/cov] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/cov.}
\label{tab:ao_cov}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/cpsd} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the cpsd method works with a vector of AOs as input. (only
with two objects in the vector)} & Test that the cpsd method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the cpsd method doesn't work with a matrix of AOs as input.} & Test that the cpsd method doesn't work for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the cpsd method works with a list of AOs as input.} & Test that the cpsd method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the cpsd method doesn't work with a mix of different shaped
AOs as input.} & Test that the cpsd method doesn't work with an input of matrices and
vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the cpsd method properly applies history.} & Test that the result of applying the cpsd method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'cpsd'.
2) Check that the rebuilt object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the cpsd method can not modify the input AO.} & Test that the cpsd method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the cpsd method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the output data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the cpsd method pass back the output objects to a list of
output variables or to a single variable.} & This test is not longer necessary because the cpsd method pass back
always only one object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the cpsd method agrees with MATLAB's cpsd when
configured to use the same parameters.} & Test that the applying cpsd works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's cpsd. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/cpsd] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) CPSD of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) CPSD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated CPSD yunits) equals
input\_1 units*input\_2 units/Hz & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) CPSD of the white noise series
Comparison with PSD:
4) compares the off-diagonal terms to check they are complex-conjugated
5) compares the diagonal terms with PSD of the individual noise} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) CPSD of the white noise
6) PSD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that CPSD(x,y) equals conj(CPSD(y,x))
2) Check that CPSD(x,x) equals PSD(x)
3) Check that CPSD(y,y) equals PSD(y) & pass \\ \hline
 \multirow{2}{3cm}{24 } & \multirow{2}{5cm}{Tests that differently sized data sets are treated properly} & Test that applying cpsd works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that cpsd used the length of the shortest ao. & pass \\ \hline
 \multirow{2}{3cm}{25 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) CPSD of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) CPSD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated CPSD yunits) equals
input\_1 units*input\_2 units/Hz & pass \\ \hline
 \multirow{2}{3cm}{51 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cpsd of the noise, without detrending, random window, set number of
averages
3) check the effective number of averages} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) cpsd of the noise, without detrending, random window, set number of
averages & pass \\ \cline{3-4}
        &    & 1) Check that calculated navs are identical to those requested & pass \\ \hline
 \multirow{2}{3cm}{52 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from uniform pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cpsd of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run cpsd again, with the nfft used
6) compare the calculated objects} & 1) white noise produced from uniform pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cpsd of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run cpsd again, with the nfft used & pass \\ \cline{3-4}
        &    & 1) Check that calculated objects C1 and C2 are identical & pass \\ \hline
 \multirow{2}{3cm}{53 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cpsd of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run cpsd again, with the nfft used
6) compare navs, nfft, psds} & 1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) cpsd of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run cpsd again, with the nfft used
6) run cpsd again, with conflicting parameters, and verify it uses
nfft rather than navs & pass \\ \cline{3-4}
        &    & 1) Check that calculated objects C1 and C2 are identical
2) Check that C3 used different values & pass \\ \hline
\caption{Unit tests for ao/cpsd.}
\label{tab:ao_cpsd}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/created} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the created method works with a vector of AOs as input.} & Test that the created method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the created method works with a matrix of AOs as input.} & Test that the created method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the created method works with a list of AOs as input.} & Test that the created method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the created method works with a mix of different shaped AOs
as input.} & Test that the created method works with an input of matrices and
vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the created method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the created method can be used with the modify command.} & Tests that the created method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the created method retruns always a well defined time object
even for an empty input object.} & Test that the created method with an empty AO & pass \\ \cline{3-4}
        &    & 1) Check that the output is a time object with a ell defined time. & pass \\ \hline
\caption{Unit tests for ao/created.}
\label{tab:ao_created}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/creator} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the creator method works with a vector of AOs as input.} & Test that the creator method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the creator method works with a matrix of AOs as input.} & Test that the creator method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the creator method works with a list of AOs as input.} & The creator method doesn't work for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the creator method works with a mix of different shaped
AOs as input.} & The creator method doesn't work with different shaped input objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the creator method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the creator method can be used with the modify command.} & Tests that the creator method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the creator method retruns all creator(s)/modifier(s) which
are in the history.} & Test that the creator method uses the option 'all' direct or in a
plist. The test file must have the modifier 'first', 'second' and
'third' & pass \\ \cline{3-4}
        &    & 1) Check that out1 contains only one creator
2) Check that out2 contain more creator/modifier & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests the negative case for the option 'all'.} & Test that the creator method throws an error if the option 'all' is
used in connection with a matrix/vector of AOs. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for ao/creator.}
\label{tab:ao_creator}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/ctranspose} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/ctranspose] method works with a vector of objects as input.} & Test that the [ao/ctranspose] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/ctranspose] method works with a matrix of objects as input.} & Test that the [ao/ctranspose] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/ctranspose] method works with a list of objects as input.} & Test that the [ao/ctranspose] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/ctranspose] method works with a mix of different arrays of objects as input.} & Tests that the [ao/ctranspose] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/ctranspose] method properly applies history.} & Test that the result of applying the [ao/ctranspose] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/ctranspose]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the ctranspose method can modify the input AO.} & Test that the ctranspose method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is ctranspose(at1). & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the abs method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/ctranspose] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/ctranspose] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/ctranspose.}
\label{tab:ao_ctranspose}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/delay} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/delay] method works with a vector of objects as input.} & Test that the [ao/delay] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/delay] method works with a matrix of objects as input.} & Test that the [ao/delay] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/delay] method works with a list of objects as input.} & Test that the [ao/delay] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/delay] method works with a mix of different arrays of objects as input.} & Tests that the [ao/delay] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/delay] method properly applies history.} & Test that the result of applying the [ao/delay] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/delay]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/delay] method can modify the input AO.} & Test that the [ao/delay] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/delay] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/delay] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/delay] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/delay] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/delay.}
\label{tab:ao_delay}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/demux} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the demux method works with a mix of different shaped AOs as
input.} & Tests that the demux method works with a mix of different shaped AOs
as input. & pass \\ \cline{3-4}
        &    & 1) Check the output objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Negative test.
Check that the demux method throwns an error for too few output
variables.} & Check that the demux method throwns an error for too few output
variables. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Negative test.
Check that the demux method throwns an error for too many output
variables.} & Check that the demux method throwns an error for too few output
variables. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
\caption{Unit tests for ao/demux.}
\label{tab:ao_demux}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/det} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the det method works with a vector of AOs as input.} & Test that the det method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the det method works with a matrix of AOs as input.} & Test that the det method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the det method works with a list of AOs as input.} & Test that the det method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the det method works with a mix of different shaped AOs as
input.} & Test that the det method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the det method properly applies history.} & Test that the result of applying the det method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'det'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the det method can modify the input AO.} & Test that the det method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at4' and 'ain' are now different.
2) Check that 'ain' is det(at4). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the det method can modify the single axis controlled by the
plist and the resuld can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the det method applies to the x-axis
2) Check that the det method applies to the y-axis
3) Check that the det method applies to both axes
4) Check that the re-built objects are the same object as 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the det method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the det method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/det] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/det.}
\label{tab:ao_det}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/detrend} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/detrend] method works with a vector of objects as input.} & Test that the [ao/detrend] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/detrend] method works with a matrix of objects as input.} & Test that the [ao/detrend] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/detrend] method works with a list of objects as input.} & Test that the [ao/detrend] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/detrend] method works with a mix of different arrays of objects as input.} & Tests that the [ao/detrend] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/detrend] method properly applies history.} & Test that the result of applying the [ao/detrend] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/detrend]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/detrend] method can modify the input AO.} & Test that the [ao/detrend] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/detrend] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/detrend] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/detrend] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/detrend] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/detrend.}
\label{tab:ao_detrend}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/dft} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/dft] method works with a vector of objects as input.} & Test that the [ao/dft] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/dft] method works with a matrix of objects as input.} & Test that the [ao/dft] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/dft] method works with a list of objects as input.} & Test that the [ao/dft] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/dft] method works with a mix of different arrays of objects as input.} & Tests that the [ao/dft] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/dft] method properly applies history.} & Test that the result of applying the [ao/dft] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/dft]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/dft] method can modify the input AO.} & Test that the [ao/dft] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/dft] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/dft] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/dft] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/dft] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/dft.}
\label{tab:ao_dft}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/diag} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the diag method works with a vector of AOs as input.} & Test that the diag method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the diag method works with a matrix of AOs as input.} & Test that the diag method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the diag method works with a list of AOs as input.} & Test that the diag method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the diag method works with a mix of different shaped AOs as
input.} & Test that the diag method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the diag method properly applies history.} & Test that the result of applying the diag method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'diag'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the diag method can modify the input AO.} & Test that the diag method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at4' and 'ain' are now different.
2) Check that 'ain' is diag(at4). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the diag method can modify the single axis controlled by the
plist and the resuld can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the svd method applies with different options.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the diag method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the diag method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/diag] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/diag.}
\label{tab:ao_diag}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/diff} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/diff] method works with a vector of objects as input.} & Test that the [ao/diff] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/diff] method works with a matrix of objects as input.} & Test that the [ao/diff] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/diff] method works with a list of objects as input.} & Test that the [ao/diff] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/diff] method works with a mix of different arrays of objects as input.} & Tests that the [ao/diff] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/diff] method properly applies history.} & Test that the result of applying the [ao/diff] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/diff]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/diff] method can modify the input AO.} & Test that the [ao/diff] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/diff] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/diff] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/diff] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/diff] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Control the method with a plist.} & Test the computation of derivative using a 2nd order & pass \\ \cline{3-4}
        &    & 1) Check that the diff method uses the 2nd order derivative.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Control the method with a plist.} & Test the computation of derivative using a 2nd order with a parabolic fit & pass \\ \cline{3-4}
        &    & 1) Check that the diff method uses the 2nd order derivative with a
parabolic fit
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Control the method with a plist.} & Test the 5 point derivative. & pass \\ \cline{3-4}
        &    & 1) Check that the diff method uses the 5 point derivative.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/diff.}
\label{tab:ao_diff}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of AOs as input.} & Test that the display method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of AOs as input.} & Test that the display method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of AOs as input.} & Test that the display method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped AOs as
input.} & Test that the display method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the display method properly applies history.} & The method display doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for ao/display.}
\label{tab:ao_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/dopplercorr} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the dopplercorr method works with a vector of AOs as input.} & Test that the dopplercorr method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the dopplercorr method works with a matrix of AOs as input.} & Test that the dopplercorr method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the dopplercorr method works with a list of AOs as input.} & Test that the dopplercorr method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the dopplercorr method works with a mix of different shaped AOs as
input.} & Test that the dopplercorr method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the dopplercorr method properly applies history.} & Test that the result of applying the dopplercorr method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'dopplercorr'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the dopplercorr method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/dopplercorr] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/dopplercorr.}
\label{tab:ao_dopplercorr}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/downsample} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the downsample method works with a vector of AOs as input.} & Test that the downsample method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the downsample method works with a matrix of AOs as input.} & Test that the downsample method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the downsample method works with a list of AOs as input.} & Test that the downsample method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the downsample method works with a mix of different shaped AOs as
input.} & Test that the downsample method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the downsample method properly applies history.} & Test that the result of applying the downsample method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'downsample'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the downsample method can modify the input AO.} & Test that the downsample method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is downsample(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the downsample method keeps the data shape of the input object.} & Test that the downsample method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the downsample method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Control the method with a plist.} & Test the downsample method with a factor and an offset. & pass \\ \cline{3-4}
        &    & 1) Check that the downsample method with an offset and a factor
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/downsample] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/downsample.}
\label{tab:ao_downsample}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/dropduplicates} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the dropduplicates method works with a vector of AOs as input.} & Test that the dropduplicates method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the dropduplicates method works with a matrix of AOs as input.} & Test that the dropduplicates method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the dropduplicates method works with a list of AOs as input.} & Test that the dropduplicates method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the dropduplicates method works with a mix of different shaped AOs as
input.} & Test that the dropduplicates method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the dropduplicates method properly applies history.} & Test that the result of applying the dropduplicates method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'dropduplicates'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the dropduplicates method can modify the input AO.} & Test that the dropduplicates method can modify the input AO by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is dropduplicates(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the dropduplicates method keeps the data shape of the input object.} & Test that the dropduplicates method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the dropduplicates method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Control the method with a plist.} & Test the dropduplicates method with different tolerances. & pass \\ \cline{3-4}
        &    & 1) Check that the different tolerances
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/dropduplicates] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/dropduplicates.}
\label{tab:ao_dropduplicates}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/dsmean} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the dsmean method works with a vector of AOs as input.} & Test that the dsmean method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the dsmean method works with a matrix of AOs as input.} & Test that the dsmean method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the dsmean method works with a list of AOs as input.} & Test that the dsmean method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the dsmean method works with a mix of different shaped AOs as
input.} & Test that the dsmean method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the dsmean method properly applies history.} & Test that the result of applying the dsmean method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'dsmean'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the dsmean method can modify the input AO.} & Test that the dsmean method can modify the input AO by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is dsmean(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the dsmean method keeps the data shape of the input object.} & Test that the dsmean method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the dsmean method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/dsmean] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/dsmean.}
\label{tab:ao_dsmean}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/eig} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eig method works with a vector of AOs as input.} & Test that the eig method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eig method works with a matrix of AOs as input.} & Test that the eig method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eig method works with a list of AOs as input.} & Test that the eig method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eig method works with a mix of different shaped AOs as
input.} & Test that the eig method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the eig method properly applies history.} & Test that the result of applying the eig method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'eig'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the eig method can modify the input AO.} & Test that the eig method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at4' and 'ain' are now different.
2) Check that 'ain' is eig(at4). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the eig method can modify the single axis controlled by the
plist and the resuld can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the svd method applies with different options.
2) Check that the re-built objects are the same object as 'out[1..2]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the eig method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the eig method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/eig] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/eig.}
\label{tab:ao_eig}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/eq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eq method works with a vector of AOs as input.} & Test that the eq method works for a vector of AOs as input. Test the
positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eq method works with a matrix of AOs as input.} & Test that the eq method works for a matrix of AOs as input. Test the
positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eq method works with a list of AOs as input.} & The eq method doesn't works for a list of AOs as input. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eq method works with a mix of different shaped AOs as
input.} & The eq method doesn't works for a list of AOs as input. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the eq method properly applies history.} & The eq method doesn't change the AO, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'plotinfo'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 't0'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'x'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'y'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'xunits'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'yunits'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'fs'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'description'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Test the eq method with an exception list which is in a plist.} & Test that the eq method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for ao/eq.}
\label{tab:ao_eq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/exp} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/exp] method works with a vector of objects as input.} & Test that the [ao/exp] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/exp] method works with a matrix of objects as input.} & Test that the [ao/exp] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/exp] method works with a list of objects as input.} & Test that the [ao/exp] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/exp] method works with a mix of different arrays of objects as input.} & Tests that the [ao/exp] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/exp] method properly applies history.} & Test that the result of applying the [ao/exp] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/exp]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/exp] method can modify the input AO.} & Test that the [ao/exp] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/exp] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/exp] method uses the plist to get the axis.} & Test that the [ao/exp] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/exp] method applies to the x-axis
2) Check that the [ao/exp] method applies to the y-axis
3) Check that the [ao/exp] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/exp] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/exp] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/exp] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/exp.}
\label{tab:ao_exp}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/export} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the export method works with non complex data in the AO.} & Tests that the export method works with non complex data in the AO. & pass \\ \cline{3-4}
        &    & 1) Check that the file exist.
2) Check that the read data is the same as the saved data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the export method works with complex data in the AO.} & Tests that the export method works with complex data in the AO. & pass \\ \cline{3-4}
        &    & 1) Check that the file exist.
2) Check that the read data is the same as the saved data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the export method works with a plist which contains the filename.} & Tests that the export method works with a plist which contains the
filename. & pass \\ \cline{3-4}
        &    & 1) Check that the file exist.
2) Check that the read data is the same as the saved data. & pass \\ \hline
\caption{Unit tests for ao/export.}
\label{tab:ao_export}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/fft} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/fft] method works with a vector of objects as input.} & Test that the [ao/fft] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/fft] method works with a matrix of objects as input.} & Test that the [ao/fft] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/fft] method works with a list of objects as input.} & Test that the [ao/fft] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/fft] method works with a mix of different arrays of objects as input.} & Tests that the [ao/fft] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/fft] method properly applies history.} & Test that the result of applying the [ao/fft] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/fft]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/fft] method can modify the input AO.} & Test that the [ao/fft] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/fft] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/fft] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/fft] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/fft] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the fft method agrees with MATLAB's fft when
configured to use the same parameters.} & Test that the applying fft works on a single AO. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's fft. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the fft method works with different data types. The testing of
tsdata types are done before.} & Test that the applying fft works on cdata and xydata. & pass \\ \cline{3-4}
        &    & 1) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the fft method works with a plist which constains the key/value
pair 'type'/'two'.} & Test that the applying fft works with a plist. & pass \\ \cline{3-4}
        &    & 1) Check that each output AO contains the correct data.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/fft.}
\label{tab:ao_fft}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/fftfilt} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the fftfilt method works with a vector of AOs as input.} & Test that the fftfilt method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the fftfilt method works with a matrix of AOs as input.} & Test that the fftfilt method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the fftfilt method works with a list of AOs as input.} & Test that the fftfilt method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the fftfilt method works with a mix of different shaped AOs as
input.} & Test that the fftfilt method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the fftfilt method properly applies history.} & Test that the result of applying the fftfilt method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'fftfilt'.
2)  Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the fftfilt method can modify the input AO.} & Test that the fftfilt method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at2' and 'ain' are now different.
2) Check that 'ain' is fftfilt(at2). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the fftfilt method keeps the data shape of the input object.} & Test that the fftfilt method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the fftfilt method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/fftfilt.}
\label{tab:ao_fftfilt}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/filtSubtract} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the filtSubtract method works with a vector of AOs as input.} & Test that the filtSubtract method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the filtSubtract method works with a matrix of AOs as input.} & Test that the filtSubtract method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the filtSubtract method works with a list of AOs as input.} & Test that the filtSubtract method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the filtSubtract method works with a mix of different shaped AOs as
input.
DOES NOT APPLY TO THIS METHOD} & Test that the filtSubtract method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the filtSubtract method properly applies history.} & Test that the result of applying the filtSubtract method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'filtSubtract'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the filtSubtract method can not modify the input AO.} & Test that the tfe method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
\caption{Unit tests for ao/filtSubtract.}
\label{tab:ao_filtSubtract}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/filter} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the filter method works with a vector of AOs as input.} & Test that the filter method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data.
3) Check the output-filter & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the filter method works with a matrix of AOs as input.} & Test that the filter method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data.
3) Check the output-filter & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the filter method works with a list of AOs as input.} & Test that the filter method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the filter method works with a mix of different shaped AOs as
input.} & Test that the filter method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the filter method properly applies history.} & Test that the result of applying the filter method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'filter'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the filter method can modify the input AO.} & Test that the filter method can modify the input AO by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is filter(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the filter method keeps the data shape of the input object.} & Test that the filter method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the filter method with a iir filter which have a different sample
rate as the input object.} & Test that the filter method can change the sample rate of the filter and
that the filter-object is returned. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a iir filter. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the filter method with a fir filter.} & Test that the filter method with a fir filter. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a fir filter. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/filter] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests the filter method with an AO and fsdata-object and an iir filter.} & Test that the result of the filter method is the product of the AO and the
response of the filter. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a iir filter.
3) Check the units & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the filter method works with a bank of parallel filters.} & Test that the filter method works for bank of parallel filters. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number of elements in 'input'
2) Check that output AO contains the correct number of data.
3) Check that output AO contains the correct data.
4) Check that histout is properly assigned & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the filter method works with a bank of serial filters.} & Test that the filter method works for bank of serial filters. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number of elements in 'input'
2) Check that output AO contains the correct number of data.
3) Check that output AO contains the correct data.
4) Check that histout is properly assigned & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests the filter method with an AO of fsdata-object and a bank of iir
parallel filter.} & Test that the result of the filter method is the product of the AO and the
response of the parallel filter bank. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a iir filter.
3) Check the units & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests the filter method with an AO of fsdata-object and a bank of iir
serial filter.} & Test that the result of the filter method is the product of the AO and the
response of the serial filter bank. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a iir filter.
3) Check the units & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests the filter method with an AO and fsdata-object and an mfir filter.} & Test that the result of the filter method is the product of the AO and the
response of the filter. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a fir filter.
3) Check the units & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Test that the filter method works with a filter embedded into a matrix
and input in a plist} & Test that the filter method works with a filter embedded into a
matrix & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output AO contains the correct data.
3) Check the output-filter & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Test that the filter method works with a filter embedded into a matrix
and input as a second input} & Test that the filter method works with a filter embedded into a
matrix & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output AO contains the correct data.
3) Check the output-filter & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Test that the filter method does not works with a N-dim matrix of
filters input in a plist.} & Test that the filter method does not works with a N-dim matrix of
filters input in a plist. & pass \\ \cline{3-4}
        &    & 1) Nothing to do. & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Test that the filter method does not works with a N-dim matrix of
filters input as a second object} & Test that the filter method does not works with a N-dim matrix of
filters input in a plist. & pass \\ \cline{3-4}
        &    & 1) Nothing to do. & pass \\ \hline
\caption{Unit tests for ao/filter.}
\label{tab:ao_filter}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/filtfilt} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the filtfilt method works with a vector of AOs as input.} & Test that the filtfilt method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data.
3) Check the output-filter & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the filtfilt method works with a matrix of AOs as input.} & Test that the filtfilt method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data.
3) Check the output-filter & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the filtfilt method works with a list of AOs as input.} & Test that the filtfilt method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the filtfilt method works with a mix of different shaped AOs as
input.} & Test that the filtfilt method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the filtfilt method properly applies history.} & Test that the result of applying the filtfilt method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'filtfilt'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the filtfilt method can modify the input AO.} & Test that the filtfilt method can modify the input AO by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is filtfilt(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the filtfilt method keeps the data shape of the input object.} & Test that the filtfilt method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the filtfilt method with a iir filter which have a different sample
rate as the input object.} & Test that the filtfilt method can change the sample rate of the filter and
that the filtfilt-object is returned. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a iir filtfilt. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the filtfilt method with a fir filter.} & Test that the filtfilt method with a fir filter. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a fir filter. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/filtfilt] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests the filtfilt method with an AO and fsdata-object and an iir filter.} & Test that the result of the filtfilt method is the product of the AO and the
response of the filter. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a iir filter.
3) Check the units & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests the filtfilt method with an AO and fsdata-object and an iir filter.} & Test that the result of the filtfilt method is the product of the AO and the
response of the filter. & pass \\ \cline{3-4}
        &    & 1) Check that the output AO contains the correct data.
2) Check that the second output is a fir filter.
3) Check the units & pass \\ \hline
\caption{Unit tests for ao/filtfilt.}
\label{tab:ao_filtfilt}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/find} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the find method works with a vector of AOs as input.} & Test that the find method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the find method works with a matrix of AOs as input.} & Tests that the find method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the find method works with a list of AOs as input.} & Tests that the find method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the find method works with a mix of different shaped AOs as
input.} & Tests that the find method works with a mix of different shaped AOs
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the find method properly applies history.} & Test that the result of applying the find method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'finf'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the find method can modify the input AO.} & Test that the find method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the abs value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the find method works with different queries to the x-/y-
axis.} & Test that the find method works with different queries to the x-/y-
axis. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the find method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the find method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/find] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Test that the find method works with AOs which have cdata.} & Test that the find method works with AOs which have cdata. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Test that the find method works with a plist which contains different
queries to the x-/y- axis.} & Test that the find method works with a plist which contains different
queries to the x-/y- axis. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for ao/find.}
\label{tab:ao_find}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/firwhiten} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the firwhiten method works with a vector of AOs as input.} & Test that the firwhiten method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check the number of elements in 'out'
2) Check the number of filters (outf) and noise-floor estimates (outxx)
3) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the firwhiten method works with a matrix of AOs as input.} & Test that the firwhiten method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check the number of elements in 'out'
2) Check the number of filters (outf) and noise-floor estimates (outxx)
3) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the firwhiten method works with a list of AOs as input.} & Test that the firwhiten method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check the number of elements in 'out'
2) Check the number of filters (outf) and noise-floor estimates (outxx)
3) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the firwhiten method works with a mix of different shaped AOs as
input.} & Test that the firwhiten method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check the number of elements in 'out'
2) Check the number of filters (outf) and noise-floor estimates (outxx)
3) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the firwhiten method properly applies history.} & Test that the result of applying the firwhiten method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'firwhiten'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the firwhiten method can modify the input AO.} & Test that the firwhiten method can modify the input AO by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is firwhiten(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the firwhiten method keeps the data shape of the input object.} & Test that the firwhiten method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the firwhiten method with a complex plist.} & Test that the result of applying the firwhiten method with a complex plist
can be processed back to a m-file. & pass \\ \cline{3-4}
        &    & 1) Check the output data
2) Check the output filter
3) Check the noise-floor estimates
4) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the spectral falttening capability of firwhiten method.} & Test that the application of the firwhiten method enhances the
spectral flatness of input data. & pass \\ \cline{3-4}
        &    & 1) Calculate PSD of input and whitened data
2) Compare relative spectral flatness coefficients & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/firwhiten] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the errors are cleared for this method.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output has no error fields & pass \\ \hline
\caption{Unit tests for ao/firwhiten.}
\label{tab:ao_firwhiten}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/fixfs} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the fixfs method works with a vector of AOs as input.} & Test that the fixfs method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as
the number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the fixfs method works with a matrix of AOs as input.} & Test that the fixfs method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as
the number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the fixfs method works with a list of AOs as input.} & Test that the fixfs method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as
the number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the fixfs method works with a mix of different shaped AOs as
input.} & Test that the fixfs method works with an input of matrices and vectors
and single AOs. Additionally define a 'fs' in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data.
3) Check that 't0' and 'fs' are correct. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the fixfs method properly applies history.} & Test that the result of applying the fixfs method can be processed back
to an m-file. Additionally define a 'fs' in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'fixfs'.
2)  Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the fixfs method can modify the input AO.} & Test that the fixfs method can modify the input AO by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is fixfs(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the fixfs method keeps the data shape of the input object.} & Test that the fixfs method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the fixfs method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the fixfs method works with a list of AOs as input and different
't0' and 'fs' for the inputs.} & Test that the fixfs method works for a list of AOs as input and different
't0' and 'fs' & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as
the number in the input.
2) Check that each output AO contains the correct data.
3) Check that each output contains the correct frequency and start time. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/fixfs] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the fixfs method works with the method 'samples'.} & Test that the fixfs method works for the method 'samples'. & pass \\ \cline{3-4}
        &    & 1) Check that each output AO contains the correct data.
2) Check that each output contains the correct frequency and start time. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the fixfs method works with antialising filter.} & Test that the fixfs method works for the antialising filters iir and fir. & pass \\ \cline{3-4}
        &    & 1) Check that each output AO contains the correct data.
2) Check that each output contains the correct frequency and start time. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the fixfs method works with an AO with non evenly sampled data.} & Test that the fixfs method works for an AO with non evenly samples data. & pass \\ \cline{3-4}
        &    & 1) Check that each output AO contains the correct data.
2) Check that each output contains the correct frequency and start time. & pass \\ \hline
\caption{Unit tests for ao/fixfs.}
\label{tab:ao_fixfs}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/fs} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the fs method works with a vector of AOs as input.} & The fs method doesn't work with a vector of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the fs method works with a matrix of AOs as input.} & The fs method doesn't work with a matrix of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the fs method works with a list of AOs as input.} & The fs method doesn't work with a list of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the fs method works with a mix of different shaped AOs as input.} & The fs method can only return the fs value of one AO. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the fs method properly applies history.} & The fs method doesn't change the AO, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the fs method works for AOs with different data objects.} & Test that the fs method returns the fs value for AOs with cdata,
fsdata, tsdata and xydata objects. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for ao/fs.}
\label{tab:ao_fs}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/ge} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ge method compare an AO with scalar value} & Test that the ge method works with relational operators and the function
command. Use for this AOs with different data objects. & pass \\ \cline{3-4}
        &    & 1) Check that the result of the 'relational operator' and the 'function'
command are the same.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ge method compare an AO with one other AO} & Test that the ge method works with relational operators and the function
command. Use for this AOs with different data objects.
Remark that both AOs must have the same size. & pass \\ \cline{3-4}
        &    & 1) Check that the result of the 'relational operator' and the 'function'
command are the same.
2) Check that each output AO contains the correct data. & pass \\ \hline
\caption{Unit tests for ao/ge.}
\label{tab:ao_ge}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/get} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the get method of the ao class.} & Test that the get returns returns the value of the specified
property. Do this for all properties of the AO. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the get method works with a plist.} & Test that the get returns returns the value of the specified
property which is defined in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests the get method of the ao class.} & Test that the get throws an error if the input are more than
one AO. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for ao/get.}
\label{tab:ao_get}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/gt} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the gt method compare an AO with scalar value} & Test that the gt method works with relational operators and the function
command. Use for this AOs with different data objects. & pass \\ \cline{3-4}
        &    & 1) Check that the result of the 'relational operator' and the 'function'
command are the same.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the gt method compare an AO with one other AO} & Test that the gt method works with relational operators and the function
command. Use for this AOs with different data objects.
Remark that both AOs must have the same size. & pass \\ \cline{3-4}
        &    & 1) Check that the result of the 'relational operator' and the 'function'
command are the same.
2) Check that each output AO contains the correct data. & pass \\ \hline
\caption{Unit tests for ao/gt.}
\label{tab:ao_gt}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/heterodyne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the heterodyne method works with a vector of AOs as input.} & Test that the heterodyne method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the heterodyne method works with a matrix of AOs as input.} & Test that the heterodyne method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the heterodyne method works with a list of AOs as input.} & Test that the heterodyne method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the heterodyne method works with a mix of different shaped AOs as
input.} & Test that the heterodyne method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the heterodyne method properly applies history.} & Test that the result of applying the heterodyne method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'heterodyne'.
2)  Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests the heterodyne method functionality.} & Build reference signal, mixed signal and heterodyne the 2nd to obtain the first
Downsample is set to 'no' & pass \\ \cline{3-4}
        &    & Test that we can recover the initial signal after heterodyne up to
a numerical error given by tol & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests the heterodyne method functionality.} & Build reference signal, mixed signal and heterodyne the 2nd to obtain the first
Downsample is set to 'yes' & pass \\ \cline{3-4}
        &    & Test that we can recover the initial signal after heterodyne up to
a numerical error given by tol & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/heterodyne] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/heterodyne.}
\label{tab:ao_heterodyne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/hist} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the hist method works with a vector of AOs as input.} & Test that the hist method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the hist method works with a matrix of AOs as input.} & Test that the hist method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the hist method works with a list of AOs as input.} & Test that the hist method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the hist method works with a mix of different shaped AOs as
input.} & Test that the hist method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the hist method properly applies history.} & Test that the result of applying the hist method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'hist'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the hist method can modify the input AO.} & Test that the hist method can modify the input AO by calling with no
output. Remark that the command at1.hist() doesn't call the histogram
method because an AO have a property with the name 'hist'. Thus the
command at1.hist returns the value in the property hist. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is hist(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the hist method keeps the data shape of the input object.} & Test that the hist method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the hist method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Control the method with a plist.} & Test the hist method with a factor and an offset. & pass \\ \cline{3-4}
        &    & 1) Check that the hist method with defined number of bins
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/hist] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Control the method with a plist.} & Test the hist method with a factor and an offset. & pass \\ \cline{3-4}
        &    & 1) Check that the hist method with set of bin centers
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/hist.}
\label{tab:ao_hist}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/ifft} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ifft method works with a vector of AOs as input.} & Test that the ifft method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ifft method works with a matrix of AOs as input.} & Test that the ifft method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ifft method works with a list of AOs as input.} & Test that the ifft method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ifft method works with a mix of different shaped AOs as
input.} & Test that the ifft method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ifft method properly applies history.} & Test that the result of applying the ifft method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ifft'.
2)  Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the ifft method can modify the input AO.} & Test that the ifft method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at2' and 'ain' are now different.
2) Check that 'ain' is ifft(at2). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the ifft method keeps the data shape of the input object.} & Test that the ifft method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the ifft method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the ifft method agrees with MATLAB's ifft when
configured to use the same parameters.} & Test that the applying ifft works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's ifft. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/ifft] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the ifft method agrees with MATLAB's ifft when
configured to use the same parameters.} & Test that the applying ifft works on a single AO with 'nonsymmetric'
option. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's ifft. & pass \\ \hline
\caption{Unit tests for ao/ifft.}
\label{tab:ao_ifft}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/imag} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the imag method works with a vector of AOs as input.} & Test that the imag method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the imag method works with a matrix of AOs as input.} & Test that the imag method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the imag method works with a list of AOs as input.} & Test that the imag method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the imag method works with a mix of different shaped AOs as
input.} & Test that the imag method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the imag method properly applies history.} & Test that the result of applying the imag method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'imag'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the imag method can modify the input AO.} & Test that the imag method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is imag(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the imag method can modify the single axis controlled by the
plist and the resuld can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the imag method applies to the x-axis
2) Check that the imag method applies to the y-axis
3) Check that the imag method applies to both axes
4) Check that the re-built objects are the same object as 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the imag method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the imag method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/imag] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/imag.}
\label{tab:ao_imag}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/index} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the index method works with a vector of AOs as input.} & Test that the index method works for a vector of AOs as input. The
following indexing should work:
I = [ 1 2 3 ] or (I/J) = [(1,1), (1,2), (1,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the index method works with a matrix of AOs as input.} & Test that the index method works for a matrix of AOs as input. The
following indexing should work:
I = [ 1 3 5 ] or (I/J) = [(1,1), (1,2), (1,3)]
[ 2 4 6 ]            [(2,1), (2,2), (2,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the index method works with a list of AOs as input.} & The index method doesn't work for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the index method properly applies history.} & Test that the result of index have an additional history step. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds
to 'index'. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the index method works for the modifier command.} & Tests that the index method works for the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the index method can be controled with a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the index method selects more objects if I have more indices.} & Test that the index method selects more objects if I have more indices. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/index] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/index.}
\label{tab:ao_index}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/integrate} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the integrate method works with a vector of AOs as input.} & Test that the integrate method works for a vector of AOs as input. Use for
this test the trapezoidal method. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the integrate method works with a matrix of AOs as input.} & Test that the integrate method works for a matrix of AOs as input. Use for
this test the Trapezoidal method. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the integrate method works with a list of AOs as input.} & Test that the integrate method works for a list of AOs as input. Use for
this test the trapezoidal. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the integrate method works with a mix of integrateerent shaped AOs as
input.} & Test that the integrate method works with an input of matrices and vectors
and single AOs. Use for this test the trapezoidal. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the integrate method properly applies history.} & Test that the result of applying the integrate method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'integrate'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the integrate method can modify the input AO.} & Test that the integrate method can modify the input AO by calling with no
output. Use for this test the trapezoidal. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now integrateerent.
2) Check that 'ain' is integrate(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the integrate method keeps the data shape of the input object.} & Test that the integrate method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the integrate method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Control the method with a plist.} & Test the trapezoidal. & pass \\ \cline{3-4}
        &    & 1) Check that the integrate method uses the trapezoidal method.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/integrate] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/integrate.}
\label{tab:ao_integrate}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/interp} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the interp method works with a vector of AOs as input.} & Test that the interp method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the interp method works with a matrix of AOs as input.} & Test that the interp method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the interp method works with a list of AOs as input.} & Test that the interp method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the interp method works with a mix of different shaped AOs as
input.} & Test that the interp method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the interp method properly applies history.} & Test that the result of applying the interp method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'interp'.
2) Check that the re-built object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the interp method can modify the input AO.} & Test that the interp method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is interp(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the interp method keeps the data shape of the input object.} & Test that the interp method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the interp method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the interp method can different interpolations.} & Test that the interp method can all of MATLAB interpolates methods.
'nearest' - Nearest neighbor interpolation
'linear'  - Linear interpolation
'spline'  - Cubic spline interpolation (see UTPs above)
'pchip'   - Piecewise cubic Hermite interpolation & pass \\ \cline{3-4}
        &    & 1) Check the different interpolations
2) Check that the re-built objects are the same as 'out1..3'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/interp] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/interp.}
\label{tab:ao_interp}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/interpmissing} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the interpmissing method works with a vector of AOs as input.} & Test that the interpmissing method works for a vector of AOs as input.
Known gaps at the position idx = 30 and 51 & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the interpmissing method works with a matrix of AOs as input.} & Test that the interpmissing method works for a matrix of AOs as input.
Known gaps at the position idx = 30 and 51 & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the interpmissing method works with a list of AOs as input.} & Test that the interpmissing method works for a list of AOs as input.
Known gaps at the position idx = 30 and 51 & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the interpmissing method works with a mix of different shaped AOs as
input.} & Test that the interpmissing method works with an input of matrices and vectors
and single AOs. Known gaps at the position idx = 30 and 51 & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the interpmissing method properly applies history.} & Test that the result of applying the interpmissing method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'interpmissing'.
2) Check that the re-built object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the interpmissing method can modify the input AO.} & Test that the interpmissing method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign).
Known gaps at the position idx = 30 and 51 & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is interpmissing(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the interpmissing method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the interpmissing method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the interpmissing method can change the tolerance for finding
missing samples.} & Test that the interpmissing method works with a plist which changes the
tolerance. Known gaps at the position idx = 30 and 51 with the width of 40
and 60 & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data.
3) Check that the re-built object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/interpmissing] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/interpmissing.}
\label{tab:ao_interpmissing}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/inv} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the inv method works with a vector of AOs as input.} & Test that the inv method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the inv method works with a matrix of AOs as input.} & Test that the inv method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the inv method works with a list of AOs as input.} & Test that the inv method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the inv method works with a mix of different shaped AOs as
input.} & Test that the inv method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the inv method properly applies history.} & Test that the result of applying the inv method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'inv'.
2) Check that the re-built object is the same as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the inv method can modify the input AO.} & Test that the inv method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at4' and 'ain' are now different.
2) Check that 'ain' is inv(at4). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the inv method can modify the single axis controlled by the
plist and the resuld can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the inv method applies to the x-axis
2) Check that the inv method applies to the y-axis
3) Check that the inv method applies to both axes
4) Check that the re-built objects are the same as 'out1..3'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the inv method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the inv method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/inv] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/inv.}
\label{tab:ao_inv}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/isprop} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isprop method works with a vector of AOs as input.} & Test that the isprop method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isprop method works with a matrix of AOs as input.} & Test that the isprop method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isprop method works with a list of AOs as input.} & Test that the isprop method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isprop method works with a mix of different shaped AOs as
input.} & Test that the isprop method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isprop method properly applies history.} & The method isprop doesn't change the object, thus it is not necessary to
apply history. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the isprop method works for each property.} & Test that the isprop method works for the properties:
'data', 'mfile', 'mfilename', 'mdlfile', 'mdlfilename', 'procinfo',
'plotinfo', 'description', 'hist', 'name' & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the negatice case and the not function command.} & Test that the isprop method retrun false for a unknown property and for
methods of the object. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for ao/isprop.}
\label{tab:ao_isprop}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf join/fsdata} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the join method works with a vector of AOs as input.} & Test that the join method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO.
2) Check that the output have the correct data.
3) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the join method works with a matrix of AOs as input.} & Tests that the join method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO.
2) Check that the output have the correct data.
3) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the join method works with a list of AOs as input.} & Tests that the join method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO.
2) Check that the output have the correct data.
3) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the join method works with a mix of different shaped AOs as
input.} & Tests that the join method works with a mix of different shaped AOs
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO.
2) Check that the output have the correct data.
3) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the join method properly applies history.} & Test that the result of applying the join method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'join'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the join method can modify the input AO.} & Test that the join method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is joined
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the join method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [join/fsdata] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for join/fsdata.}
\label{tab:join_fsdata}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf join/tsdata} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the join method works with a vector of AOs as input.} & Test that the join method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO.
2) Check that the output have the correct data.
3) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the join method works with a matrix of AOs as input.} & Test that the join method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO.
2) Check that the output have the correct data.
3) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the join method works with a list of AOs as input.} & Tests that the join method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO.
2) Check that the output have the correct data.
3) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the join method works with a mix of different shaped AOs as
input.} & Tests that the join method works with a mix of different shaped AOs
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO.
2) Check that the output have the correct data.
3) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the join method properly applies history.} & Test that the result of applying the join method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'join'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the join method can modify the input AO.} & Test that the join method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is joined
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the join method fills the gaps with zeros.} & Test that the join method fills the gaps with zeros. & pass \\ \cline{3-4}
        &    & 1) Check that the join method filled the gaps with zero
2) Check that the re-built objects are the same as out[1..2] & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the join method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the x-values.} & Test the x-values. & pass \\ \cline{3-4}
        &    & 1) Check the x-values for the case where we 'zerofill' or not.
2) Compare the outputs to see that switching the order did not matter,
because if the different t0 of the data, that get sorted anyways. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [join/tsdata] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for join/tsdata.}
\label{tab:join_tsdata}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/lcohere} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the lcohere method works with a vector of AOs as input.} & Test that the lcohere method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the lcohere method doesn't work with a matrix of AOs as input.} & Test that the lcohere method doesn't work for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to do & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the lcohere method works with a list of AOs as input.} & Test that the lcohere method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the lcohere method doesn't work with a mix of different
shaped AOs as input.} & Test that the lcohere method doesn't work with an input of matrices
and vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the lcohere method properly applies history.} & Test that the result of applying the lcohere method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'lcohere'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the lcohere method can not modify the input AO.} & Test that the lcohere method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the plus method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the output data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the lcohere method pass back the output objects to a list of
output variables or to a single variable.} & This test is not longer necessary because the cohere method pass back
always only one object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/lcohere] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) complex lcoherence of the white noise series
4) compare C(x,y) with conj(C(y,x))
5) compare C(x,x) and C(y,y) with 1} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) complex log-scale coherence of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that C(x,y) equals conj(C(y,x))
2) Check that C(x,x) equals 1
2) Check that C(y,y) equals 1 & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) magnitude-squared log-scale coherence of the white noise series
4) compare C(x,y) with C(y,x)
5) compare C(x,x) and C(y,y) with 1} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) magnitude-squared log-scale coherence of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that C(x,y) equals C(y,x)
1) Check that C(x,x) equals 1
1) Check that C(y,y) equals 1 & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) complex log-scale coherence of the combination of white noise series
4) compare C(x,y) with 1} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) complex log-scale coherence of the combination of noise & pass \\ \cline{3-4}
        &    & 1) Check that the complex coherence equals 1 & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) magnitude-squared log-scale coherence of the combination of white noise series
4) compare C(x,y) with 1} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) magnitude-squared log-scale coherence of the combination of noise & pass \\ \cline{3-4}
        &    & 1) Check that the magnitude-squared coherence equals 1 & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests symmetry properties of complex-coherence:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) magnitude-squared log-scale coherence M of the combination of white noise series
4) complex log-scale coherence C of the combination of white noise series
5) compare abs(C)\^2 with M} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) magnitude-squared log-scale coherence of the combination of noise
6) complex log-scale coherence of the combination of noise & pass \\ \cline{3-4}
        &    & 1) Check that the magnitude-squared coherence equals the square
modulus of the complex coherence & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) complex cohere of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) complex cohere of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (complex coherence yunits) equals [1]
2) Check that (complex coherence xunits) equals [Hz] & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) magnitude-squared cohere of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) magnitude-squared cohere of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (magnitude-squared coherence yunits) equals [1]
2) Check that (magnitude-squared coherence xunits) equals [Hz] & pass \\ \hline
 \multirow{2}{3cm}{30 } & \multirow{2}{5cm}{Tests handling of special cases:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) the same noise series
3) lcohere of the white noise series
4) compares the output to unity} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
the same data as 1) and 2)
4) lcohere of the series & pass \\ \cline{3-4}
        &    & 1) Check that calculated lcohere equals 1 & pass \\ \hline
\caption{Unit tests for ao/lcohere.}
\label{tab:ao_lcohere}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/lcpsd} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the lcpsd method works with a vector of AOs as input.} & Test that the lcpsd method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the lcpsd method doesn't work with a matrix of AOs as input.} & Test that the lcpsd method doesn't work for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the lcpsd method works with a list of AOs as input.} & Test that the lcpsd method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the lcpsd method doesn't work with a mix of different shaped
AOs as input.} & Test that the lcpsd method doesn't work with an input of matrices and
vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the lcpsd method properly applies history.} & Test that the result of applying the lcpsd method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'lcpsd'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the lcpsd method can not modify the input AO.} & Test that the lcpsd method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the plus method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the output data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the lcpsd method pass back the output objects to a list of
output variables or to a single variable.} & This test is not longer necessary because the cohere method pass back
always only one object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/lcpsd] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that differently sized data sets are treated properly} & Test that applying lcpsd works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that lcpsd used the length of the shortest ao. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) LCPSD of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) LCPSD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated LCPSD yunits) equals
input\_1 units*input\_2 units/Hz & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) LCPSD of the white noise series
Comparison with LPSD:
4) compares the off-diagonal terms to check they are complex-conjugated
5) compares the diagonal terms with PSD of the individual noise} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) LCPSD of the white noise
6) LPSD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that LCPSD(x,x) equals LPSD(x)
2) Check that LCPSD(y,y) equals LPSD(y)
3) Check that LCPSD(x,y) equals conj(LCPSD(y,x)) & pass \\ \hline
\caption{Unit tests for ao/lcpsd.}
\label{tab:ao_lcpsd}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/le} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the le method compare an AO with scalar value} & Test that the le method works with relational operators and the function
command. Use for this AOs with different data objects. & pass \\ \cline{3-4}
        &    & 1) Check that the result of the 'relational operator' and the 'function'
command are the same.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the le method compare an AO with one other AO} & Test that the le method works with relational operators and the function
command. Use for this AOs with different data objects.
Remark that both AOs must have the same size. & pass \\ \cline{3-4}
        &    & 1) Check that the result of the 'relational operator' and the 'function'
command are the same.
2) Check that each output AO contains the correct data. & pass \\ \hline
\caption{Unit tests for ao/le.}
\label{tab:ao_le}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/len} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the len method works with a vector of AOs as input.} & Test that the len method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the len method works with a matrix of AOs as input.} & Test that the len method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the len method works with a list of AOs as input.} & Test that the len method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the len method works with a mix of different shaped AOs as
input.} & Test that the len method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the len method properly applies history.} & The len method doesn't change the object, thus it is not necessary to test
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for ao/len.}
\label{tab:ao_len}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/linSubtract} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the linSubtract method works with a vector of AOs as input.} & Test that the linSubtract method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the linSubtract method works with a matrix of AOs as input.} & Test that the linSubtract method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the linSubtract method works with a list of AOs as input.} & Test that the linSubtract method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the linSubtract method works with a mix of different shaped AOs as
input.} & Test that the linSubtract method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the linSubtract method properly applies history.} & Test that the result of applying the linSubtract method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'linSubtract'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the linSubtract method can not modify the input AO.} & Test that the tfe method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/linSubtract] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/linSubtract.}
\label{tab:ao_linSubtract}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/lincom} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the lincom method works with a vector of AOs as input.} & Test that the lincom method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1
2) Check that the output AO contains the correct units
3) Check that the output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the lincom method works with a list of AOs as input.} & Test that the lincom method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that the output AO contains the correct units
3) Check that the output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the lincom method properly applies history.} & Test that the result of applying the lincom method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'lincom'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the lincom method can not modify the input AO.} & Test that the lincom method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the plus method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the output data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/lincom] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the lincom method works with a vector of AOs as input + a pest object.} & Test that the lincom method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1
2) Check that the output AO contains the correct units
3) Check that the output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the lincom method works with a list of AOs as input + a pest object.} & Test that the lincom method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that the output AO contains the correct units
3) Check that the output AO contains the correct data. & pass \\ \hline
\caption{Unit tests for ao/lincom.}
\label{tab:ao_lincom}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/ln} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/ln] method works with a vector of objects as input.} & Test that the [ao/ln] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/ln] method works with a matrix of objects as input.} & Test that the [ao/ln] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/ln] method works with a list of objects as input.} & Test that the [ao/ln] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/ln] method works with a mix of different arrays of objects as input.} & Tests that the [ao/ln] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/ln] method properly applies history.} & Test that the result of applying the [ao/ln] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/ln]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/ln] method can modify the input AO.} & Test that the [ao/ln] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/ln] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/ln] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/ln] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/ln] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/ln.}
\label{tab:ao_ln}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for ao/loadobj.}
\label{tab:ao_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/log} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/log] method works with a vector of objects as input.} & Test that the [ao/log] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/log] method works with a matrix of objects as input.} & Test that the [ao/log] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/log] method works with a list of objects as input.} & Test that the [ao/log] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/log] method works with a mix of different arrays of objects as input.} & Tests that the [ao/log] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/log] method properly applies history.} & Test that the result of applying the [ao/log] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/log]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/log] method can modify the input AO.} & Test that the [ao/log] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/log] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/log] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/log] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/log] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/log.}
\label{tab:ao_log}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/log10} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/log10] method works with a vector of objects as input.} & Test that the [ao/log10] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/log10] method works with a matrix of objects as input.} & Test that the [ao/log10] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/log10] method works with a list of objects as input.} & Test that the [ao/log10] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/log10] method works with a mix of different arrays of objects as input.} & Tests that the [ao/log10] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/log10] method properly applies history.} & Test that the result of applying the [ao/log10] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/log10]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/log10] method can modify the input AO.} & Test that the [ao/log10] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/log10] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/log10] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/log10] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/log10] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/log10.}
\label{tab:ao_log10}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/lpsd} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the lpsd method works with a vector of AOs as input.} & Test that the lpsd method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the lpsd method works with a matrix of AOs as input.} & Test that the lpsd method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the lpsd method works with a list of AOs as input.} & Test that the lpsd method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the lpsd method works with a mix of different shaped AOs as
input.} & Test that the lpsd method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the lpsd method properly applies history.} & Test that the result of applying the lpsd method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'lpsd'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the lpsd method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the lpsd method agrees with MATLAB's pwelch if the frequency
resolution of the latter is changed to match those used in lpsd} & Test that the applying psd works on a single AO. & pass \\ \cline{3-4}
        &    & 1) Check that the DFT equations (eq. (3) and (4) in [1]) are fulfilled.
2) Check that we get the same outputs for each frequency bin when
computing the psd using matlab's fft with the frequency resolution
values retrieved by lpsd (and already tested in (1))
[1] G. Heinzel, lpsd revisited: ltf, S2-AEI-TN-3052 & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/lpsd] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) LPSD of the white noise
3) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) LPSD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated LPSD yunits) equals (input units)\^2 / Hz
2) Check that (calculated LPSD xunits) equals Hz & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from uniform pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) LASD of the white noise
3) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from uniform distribution + offset
2) Assign a random unit
3) LASD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated LASD yunits) equals (input units) / Hz\^(1/2)
2) Check that (calculated LASD xunits) equals Hz & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) LPS of the white noise
3) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) LPS of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated LPS yunits) equals (input units)\^2
2) Check that (calculated LPS xunits) equals Hz & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from uniform distribution, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) LAS of the white noise
3) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from uniform distribution + offset
2) Assign a random unit
3) LAS of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated LAS yunits) equals (input units)
2) Check that (calculated LAS xunits) equals Hz & pass \\ \hline
 \multirow{2}{3cm}{41 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (Rectangular)
3) lpsd passing the window object (Rectangular type)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Rectangular window (name)
4) Estimate the psd without detrending, Rectangular window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{42 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (BH92)
3) lpsd passing the window object (BH92 type)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, BH92 window (name)
4) Estimate the psd without detrending, BH92 window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{43 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (Hamming)
3) lpsd passing the window object (Hamming type)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Hamming window (name)
4) Estimate the psd without detrending, Hamming window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{44 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (Hanning)
3) lpsd passing the window object (Hanning type)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Hanning window (name)
4) Estimate the psd without detrending, Hanning window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{45 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (Bartlett)
3) lpsd passing the window object (Bartlett type)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Bartlett window (name)
4) Estimate the psd without detrending, Bartlett window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{46 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (Nuttall3)
3) lpsd passing the window object (Nuttall3 type)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Nuttall3 window (name)
4) Estimate the psd without detrending, Nuttall3 window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{47 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (Kaiser, psll = 150)
3) lpsd passing the window object (Kaiser type, psll = 150)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Kaiser window (name)
4) Estimate the psd without detrending, Kaiser window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{48 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (Kaiser, psll = default)
3) lpsd passing the window object (Kaiser type, psll = default)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Kaiser window (name)
4) Estimate the psd without detrending, Kaiser window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{49 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (Nuttall4)
3) lpsd passing the window object (Nuttall4 type)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Nuttall4 window (name)
4) Estimate the psd without detrending, Nuttall4 window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
 \multirow{2}{3cm}{50 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) lpsd passing the window name (SFT3F)
3) lpsd passing the window object (SFT3F type)
4) compares the two psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, SFT3F window (name)
4) Estimate the psd without detrending, SFT3F window (object)
5) Compare results & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical & pass \\ \hline
\caption{Unit tests for ao/lpsd.}
\label{tab:ao_lpsd}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/lscov} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the lscov method works with a vector of AOs as input.} & Test that the lscov method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check the data type of the output
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the lscov method works with a matrix of AOs as input.} & Tests that the lscov method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check the data type of the output
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the lscov method works with a list of AOs as input.} & Tests that the lscov method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check the data type of the output
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the lscov method properly applies history.} & Test that the result of applying the lscov method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'lscov'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{The lscov method can not be used as a modifer method.} & The lscov method can not be used as a modifer method. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the lscov method uses weights for the fit.} & Check that the lscov method uses weights for the fit. & pass \\ \cline{3-4}
        &    & 1) Check the output data
2) Check the yunits
3) Check that 'out1' and 'out2' have the same data
4) Check that 'out3' and 'out4' have the same data
5) Check the re-built objects & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/lscov] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/lscov.}
\label{tab:ao_lscov}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/lt} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the lt method compare an AO with scalar value} & Test that the lt method works with relational operators and the function
command. Use for this AOs with different data objects. & pass \\ \cline{3-4}
        &    & 1) Check that the result of the 'relational operator' and the 'function'
command are the same.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the lt method compare an AO with one other AO} & Test that the lt method works with relational operators and the function
command. Use for this AOs with different data objects.
Remark that both AOs must have the same size. & pass \\ \cline{3-4}
        &    & 1) Check that the result of the 'relational operator' and the 'function'
command are the same.
2) Check that each output AO contains the correct data. & pass \\ \hline
\caption{Unit tests for ao/lt.}
\label{tab:ao_lt}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/ltfe} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ltfe method works with a vector of AOs as input.} & Test that the ltfe method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ltfe method doesn't work with a matrix of AOs as input.} & Test that the ltfe method doesn't work for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ltfe method works with a list of AOs as input.} & Test that the ltfe method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ltfe method doesn't work with a mix of different shaped
AOs as input.} & Test that the ltfe method doesn't work with an input of matrices and
vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ltfe method properly applies history.} & Test that the result of applying the ltfe method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ltfe'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the ltfe method can not modify the input AO.} & Test that the ltfe method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the ltfe method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the output data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the ltfe method pass back the output objects to a list of
output variables or to a single variable.} & This test is not longer necessary because the ltfe method pass back
always only one object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/ltfe] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) Ltfe of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) Ltfe of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated ltfe yunits) equals [1/Hz] & pass \\ \hline
 \multirow{2}{3cm}{30 } & \multirow{2}{5cm}{Tests handling of special cases:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) the same noise series
3) ltfe of the white noise series
4) compares the output to unity} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
the same data as 1) and 2)
4) ltfe of the series & pass \\ \cline{3-4}
        &    & 1) Check that calculated ltfe equals 1 & pass \\ \hline
\caption{Unit tests for ao/ltfe.}
\label{tab:ao_ltfe}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/max} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/max] method works with a vector of objects as input.} & Test that the [ao/max] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/max] method works with a matrix of objects as input.} & Test that the [ao/max] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/max] method works with a list of objects as input.} & Test that the [ao/max] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/max] method works with a mix of different arrays of objects as input.} & Tests that the [ao/max] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/max] method properly applies history.} & Test that the result of applying the [ao/max] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/max]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/max] method can modify the input AO.} & Test that the [ao/max] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/max] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{208 } & \multirow{2}{5cm}{Test that the [ao/max] method uses the plist to get the axis. This is
intended to test methods like ao/max and ao/min which only allow 'x' and
'y' choices.} & Test that the [ao/max] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/max] method applies to the x-axis
2) Check that the [ao/max] method applies to the y-axis
3) Check that the [ao/max] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/max] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/max] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/max] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/max.}
\label{tab:ao_max}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/mcmc} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the metropolis2D method works with a vector of AOs as input.} & Test that the metropolis2D method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the metropolis2D method works with a matrix of AOs as input.} & Test that the metropolis2D method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the metropolis2D method works with a list of AOs as input.} & Test that the metropolis2D method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the metropolis2D method works with a mix of different shaped AOs as
input.} & Test that the metropolis2D method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the metropolis2D method properly applies history.} & Test that the result of applying the metropolis2D method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'm' corresponds to
'metropolis2D'.
2) Check that the re-built object is the same object as 'm'.
THIS IS NOT TRUE FOR METROPOLIS BECAUSE THE OUTPUT CHAIN IS ONLY
EQUAL STATISTICALLY & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the metropolis2D method can not modify the input AO.} & Test that the tfe method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
\caption{Unit tests for ao/mcmc.}
\label{tab:ao_mcmc}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/md5} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the md5 method works with a vector of AOs as input.} & Test that the md5 method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' are the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the md5 method works with a matrix of AOs as input.} & Tests that the md5 method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' are the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the md5 method works with a list of AOs as input.} & Tests that the md5 method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' are the same as in the input
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the md5 method works with a mix of different shaped AOs as
input.} & Tests that the md5 method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' are the same as in the input
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the md5 method retruns for one input a string and not a cell
of a string} & Special case for one input because in this case retruns md5 a string
and not a cell. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a string
2) Check that each output AO contains the correct data. & pass \\ \hline
\caption{Unit tests for ao/md5.}
\label{tab:ao_md5}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/mean} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/mean] method works with a vector of objects as input.} & Test that the [ao/mean] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/mean] method works with a matrix of objects as input.} & Test that the [ao/mean] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/mean] method works with a list of objects as input.} & Test that the [ao/mean] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/mean] method works with a mix of different arrays of objects as input.} & Tests that the [ao/mean] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/mean] method properly applies history.} & Test that the result of applying the [ao/mean] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/mean]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/mean] method can modify the input AO.} & Test that the [ao/mean] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/mean] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{108 } & \multirow{2}{5cm}{Test that the [ao/mean] method uses the plist to get the axis. This is
intended to test methods like ao/mean and ao/std which return different
data types depending on which axis is selected.} & Test that the [ao/mean] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/mean] method applies to the x-axis
2) Check that the [ao/mean] method applies to the y-axis
3) Check that the [ao/mean] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/mean] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/mean] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/mean] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/mean.}
\label{tab:ao_mean}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/median} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/median] method works with a vector of objects as input.} & Test that the [ao/median] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/median] method works with a matrix of objects as input.} & Test that the [ao/median] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/median] method works with a list of objects as input.} & Test that the [ao/median] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/median] method works with a mix of different arrays of objects as input.} & Tests that the [ao/median] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/median] method properly applies history.} & Test that the result of applying the [ao/median] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/median]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/median] method can modify the input AO.} & Test that the [ao/median] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/median] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{108 } & \multirow{2}{5cm}{Test that the [ao/median] method uses the plist to get the axis. This is
intended to test methods like ao/mean and ao/std which return different
data types depending on which axis is selected.} & Test that the [ao/median] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/median] method applies to the x-axis
2) Check that the [ao/median] method applies to the y-axis
3) Check that the [ao/median] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/median] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/median] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/median] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/median.}
\label{tab:ao_median}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/min} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/min] method works with a vector of objects as input.} & Test that the [ao/min] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/min] method works with a matrix of objects as input.} & Test that the [ao/min] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/min] method works with a list of objects as input.} & Test that the [ao/min] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/min] method works with a mix of different arrays of objects as input.} & Tests that the [ao/min] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/min] method properly applies history.} & Test that the result of applying the [ao/min] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/min]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/min] method can modify the input AO.} & Test that the [ao/min] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/min] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{208 } & \multirow{2}{5cm}{Test that the [ao/min] method uses the plist to get the axis. This is
intended to test methods like ao/max and ao/min which only allow 'x' and
'y' choices.} & Test that the [ao/min] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/min] method applies to the x-axis
2) Check that the [ao/min] method applies to the y-axis
3) Check that the [ao/min] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/min] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/min] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/min] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/min.}
\label{tab:ao_min}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/minus} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP cdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{minus } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{tests (fsdata and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (AO no data and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and AO no data)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different fs in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x units in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x values in fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
\caption{Unit tests for ao/minus.}
\label{tab:ao_minus}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/mode} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/mode] method works with a vector of objects as input.} & Test that the [ao/mode] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/mode] method works with a matrix of objects as input.} & Test that the [ao/mode] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/mode] method works with a list of objects as input.} & Test that the [ao/mode] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/mode] method works with a mix of different arrays of objects as input.} & Tests that the [ao/mode] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/mode] method properly applies history.} & Test that the result of applying the [ao/mode] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/mode]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/mode] method can modify the input AO.} & Test that the [ao/mode] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/mode] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{108 } & \multirow{2}{5cm}{Test that the [ao/mode] method uses the plist to get the axis. This is
intended to test methods like ao/mean and ao/std which return different
data types depending on which axis is selected.} & Test that the [ao/mode] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/mode] method applies to the x-axis
2) Check that the [ao/mode] method applies to the y-axis
3) Check that the [ao/mode] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/mode] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/mode] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/mode] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/mode.}
\label{tab:ao_mode}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/mpower} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the mpower method works with a vector of AOs as input.} & Test that the mpower method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1
2) Check that each output AO contains the correct data.
3) Check the y-units & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the mpower method works with a matrix of AOs as input.} & Test that the mpower method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the mpower method works with a list of AOs as input.} & Test that the mpower method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that each output AO contains the correct data.
3) Check the y-units & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the mpower method works with a mix of different shaped AOs as
input.} & Test that the mpower method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the mpower method properly applies history.} & Test that the result of applying the mpower method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' and 'out2' corresponds to
'mpower'.
2) Check that the re-built objects are the same objectd as 'out1' and 'out2'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the mpower method can modify the input AO.} & Test that the mpower method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at4' and 'ain' are now different.
2) Check that 'ain' is mpower(at4). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the mpower method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Nothinf to check & pass \\ \hline
\caption{Unit tests for ao/mpower.}
\label{tab:ao_mpower}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/mrdivide} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP cdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rdivide } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{tests (fsdata and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (AO no data and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and AO no data)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different fs in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x values in fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
\caption{Unit tests for ao/mrdivide.}
\label{tab:ao_mrdivide}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/mtimes} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the mtimes method works with a list of AOs as input.} & Test that the mtimes method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that each output AO contains the correct data.
3) Check the y-units & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the mtimes method properly applies history.} & Test that the result of applying the mtimes method can be processed back
with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mtimes'.
2) Check that the rebuilt object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the mtimes method can not be used as a modifier method.} & Tests that the mtimes method can not be used as a modifier method. The
command should fail. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the mtimes method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the method with all data objects.} & Test that the mtimes method works with cdata-, fsdata-, tsdata-, and xydata
objects & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change.
2) Check that re-building of output is the same as the output & pass \\ \hline
\caption{Unit tests for ao/mtimes.}
\label{tab:ao_mtimes}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/ne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ne method works with a vector of AOs as input.} & Test that the ne method works for a vector of AOs as input. Test the
positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ne method works with a matrix of AOs as input.} & Test that the ne method works for a matrix of AOs as input. Test the
positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ne method works with a list of AOs as input.} & The ne method doesn't works for a list of AOs as input. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ne method works with a mix of different shaped AOs as
input.} & The ne method doesn't works for a list of AOs as input. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ne method properly applies history.} & The ne method doesn't change the AO, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the ne method with an exception list.
The function ao/ne use the function ao/eq so it is not necessary to check
all possibilities of the exception list.} & Test the ne method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because aa is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the ne method with an exception list which is in a plist.} & Test that the ne method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for ao/ne.}
\label{tab:ao_ne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/noisegen1D} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the noisegen1D method works with a vector of AOs as input.} & Test that the noisegen1D method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'av'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the noisegen1D method works with a matrix of AOs as input.} & Test that the noisegen1D method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the noisegen1D method works with a list of AOs as input.} & Test that the noisegen1D method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the noisegen1D method works with a mix of different shaped AOs as
input.} & Test that the noisegen1D method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the noisegen1D method properly applies history.} & Test that the result of applying the noisegen1D method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'noisegen1D'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the noisegen1D method can modify the input AO.} & Test that the noisegen1D method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is changed & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the noisegen1D method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the noisegen1D method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the noisegen1D method properly applies history for set filter.} & Test that the result of applying the noisegen1D method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'noisegen1D'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Tests that the noisegen1D method can modify the input AO for set 'filter'.} & Test that the noisegen1D method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the noisegen1D method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/noisegen1D.}
\label{tab:ao_noisegen1D}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/noisegen2D} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the noisegen2D method works with a vector of AOs as input.} & Test that the noisegen2D method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'acv2'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the noisegen2D method works with a matrix of AOs as input.} & Test that the noisegen2D method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the noisegen2D method works with a list of AOs as input.} & Test that the noisegen2D method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the noisegen2D method works with a mix of different shaped AOs as
input.} & Test that the whiten1D method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the noisegen2D method properly applies history.} & Test that the result of applying the noisegen2D method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'noisegen2D'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{The noisegen2D method can not modify the input AO.} & The noisegen2D method can not modify the input AO. & pass \\ \cline{3-4}
        &    & 1) Nothing to do. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the noisegen2D method keeps the data shape of the input object. The
input AO must be a couple AO with row data and a couple AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the noisegen2D method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the noisegen2D method properly applies history.} & Test that the result of applying the noisegen2D method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'noisegen2D'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
\caption{Unit tests for ao/noisegen2D.}
\label{tab:ao_noisegen2D}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/norm} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the norm method works with a vector of AOs as input.} & Test that the norm method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the norm method works with a matrix of AOs as input.} & Test that the norm method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the norm method works with a list of AOs as input.} & Test that the norm method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the norm method works with a mix of different shaped AOs as
input.} & Test that the norm method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the norm method properly applies history.} & Test that the result of applying the norm method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'norm'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the norm method can modify the input AO.} & Test that the norm method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at4' and 'ain' are now different.
2) Check that 'ain' is norm(at4). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the norm method can modify the single axis controlled by the
plist and the resuld can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the norm method applies with different options
2) Check that the re-built objects are the same object as 'out[1..4]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the norm method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
\caption{Unit tests for ao/norm.}
\label{tab:ao_norm}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/offset} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the offset method works with a vector of AOs as input.} & Test that the offset method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the offset method works with a matrix of AOs as input.} & Test that the offset method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the offset method works with a list of AOs as input.} & Test that the offset method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the offset method works with a mix of different shaped AOs as
input.} & Test that the offset method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the offset method properly applies history.} & Test that the result of applying the offset method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'offset'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the offset method can modify the input AO.} & Test that the offset method can modify the input AO by calling with
no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified have an offset of 3
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the offset method uses the offset in a plist.} & Test that the offset method uses the offset in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the offset uses the offset in the plist
2) Check that the re-built object is the same as 'out' & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the offset method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the offset method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/offset] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/offset.}
\label{tab:ao_offset}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/or} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP cdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{or } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{tests (fsdata and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (AO no data and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and AO no data)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different fs in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x values in fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
\caption{Unit tests for ao/or.}
\label{tab:ao_or}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/phase} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/phase] method works with a vector of objects as input.} & Test that the [ao/phase] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/phase] method works with a matrix of objects as input.} & Test that the [ao/phase] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/phase] method works with a list of objects as input.} & Test that the [ao/phase] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/phase] method works with a mix of different arrays of objects as input.} & Tests that the [ao/phase] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/phase] method properly applies history.} & Test that the result of applying the [ao/phase] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/phase]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/phase] method can modify the input AO.} & Test that the [ao/phase] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/phase] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/phase] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/phase] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/phase] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/phase.}
\label{tab:ao_phase}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/plus} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP cdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{plus } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{tests (fsdata and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (AO no data and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and AO no data)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different fs in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x units in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x values in fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
\caption{Unit tests for ao/plus.}
\label{tab:ao_plus}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/polyfit} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the polyfit method fails with with a vector of AOs as input.} & Test that the polyfit method works with a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check we have the correct number of output objects in the version with
single output
2) Check we have the correct number of elements in the output objects & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the polyfit method works with a matrix of AOs as input.} & Test that the polyfit method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check we have the correct number of output objects & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the polyfit method works with a list of AOs as input.} & Test that the polyfit method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check we have the correct number of output objects in the version with
single output
2) Check we have the correct number of elements in the output objects & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the polyfit method works with a mix of different shaped AOs as
input.} & Test that the polyfit method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check we have the correct number of output objects & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the polyfit method properly applies history.} & Test that the result of applying the polyfit method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'polyfit'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the polyfit method cannot modify the input AO.} & Test that the polyfit method cannot modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the polyfit method handles units correctly.} & Tests that the polyfit method handles units correctly. & pass \\ \cline{3-4}
        &    & 1) Check that the units in both cases are yunits/(xunits)\^(j) & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the ao/polyfit method agrees with MATLAB's polyfit when
configured to use the same parameters.} & Test that applying polyfit works on a single AO. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's polyfit. & pass \\ \hline
\caption{Unit tests for ao/polyfit.}
\label{tab:ao_polyfit}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/power} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the power method works with a vector of AOs as input.} & Test that the power method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the power method works with a matrix of AOs as input.} & Test that the power method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the power method works with a list of AOs as input.} & Test that the power method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that each output AO contains the correct data.
3) Check the y-units & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the power method works with a mix of different shaped AOs as
input.} & Test that the power method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is 1.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the power method properly applies history.} & Test that the result of applying the power method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'power'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the power method can modify the input AO.} & Test that the power method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is power(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the power method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the method with all data objects.} & Test that the power method works with cdata-, fsdata-, tsdata-, and xydata
objects & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change.
2) Check that re-building of output is the same as the output & pass \\ \hline
\caption{Unit tests for ao/power.}
\label{tab:ao_power}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/psd} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the psd method works with a vector of AOs as input.} & Test that the psd method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the psd method works with a matrix of AOs as input.} & Test that the psd method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the psd method works with a list of AOs as input.} & Test that the psd method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the psd method works with a mix of different shaped AOs as
input.} & Test that the psd method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the psd method properly applies history.} & Test that the result of applying the psd method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'psd'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the psd method agrees with MATLAB's pwelch, within some tolerance,
when configured to use the same parameters.} & Test that the applying psd works on a single AO. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's pwelch within tolerance. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Check that the psd method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the psd method agrees with MATLAB's pwelch when
configured to use the same parameters.} & Test that the applying psd works on a single AO. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's pwelch. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the psd method agrees with MATLAB's pwelch when
configured to use the same parameters.} & Test that the applying psd works on a single AO. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's pwelch. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/psd] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from uniform pdf, with a given mean value and
sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) psd of the white noise
4) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from uniform distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests "conservation of energy" with fixed parameters:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) psd of the white noise
4) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests "conservation of energy" with fixed parameters:
1) white noise produced from uniform pdf, with a given mean value and
sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) psd of the white noise
4) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from uniform distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests "conservation of energy" with fixed parameters:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) psd of the white noise
4) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests "conservation of energy" with fixed parameters:
1) white noise produced from uniform pdf, with a given mean value and
sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) psd of the white noise
4) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from uniform distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) PSD of the white noise
3) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) PSD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated PSD yunits) equals (input units)\^2 / Hz
2) Check that (calculated PSD xunits) equals Hz & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from uniform pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) ASD of the white noise
3) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from uniform distribution + offset
2) Assign a random unit
3) ASD of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated ASD yunits) equals (input units) / Hz\^(1/2)
2) Check that (calculated ASD xunits) equals Hz & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) PS of the white noise
3) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) PS of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated PS yunits) equals (input units)\^2
2) Check that (calculated PS xunits) equals Hz & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from uniform distribution, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) AS of the white noise
3) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from uniform distribution + offset
2) Assign a random unit
3) AS of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated AS yunits) equals (input units)
2) Check that (calculated AS xunits) equals Hz & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Welch window and no detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{22 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Welch window and mean detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{23 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Welch window and linear detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{24 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Hanning window and no detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{25 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Hanning window and mean detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{26 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Hanning window and linear detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{27 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Hamming window and no detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{28 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Hamming window and mean detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{29 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Hamming window and linear detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{30 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
BH92 window and no detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{31 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
BH92 window and mean detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{32 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
BH92 window and linear detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{33 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Kaiser200 window and no detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{34 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Kaiser200 window and mean detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{35 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) Calculate the expected level of noise from sample statistics
3) Calculates the PSD of the individual parts, with:
Kaiser200 window and linear detrend
4) Evaluate the mean and standard deviation of the Checks on individual PSDs:
5) Checks on individual PSDs: mean and standard deviation of the PSD points
6) Evaluate the expected value, estimated from the std of the
individual segments
7) Compares with the mean performed on the individual segments
8) Checks on averaged PSDs: mean and standard deviation of all the PSD points
9) Compares the grand-mean with the estimated white noise level} & 1) Split the reference data into different segments
2) Calculates the PSD of the individual parts & pass \\ \cline{3-4}
        &    & 1) Evaluate the mean and standard deviation of the Checks on individual PSDs:
2) Checks on individual PSDs: mean and standard deviation of the PSD points
3) Evaluate the expected value, estimated from the std of the
individual segments
4) Compares with the mean performed on the individual segments
5) Checks on averaged PSDs: mean and standard deviation of all the PSD points
6) Compares the grand-mean with the estimated white noise level & pass \\ \hline
 \multirow{2}{3cm}{38 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) add a given trend of order n
4) psd of the noise, with proper detrending
5) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Add a trend
4) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{39 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from uniform pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) add a given trend of order n
4) psd of the noise, with proper detrending
5) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from uniform distribution + offset
2) Calculate the statistical parameters
3) Add a trend
4) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{40 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) add a given trend of order n
4) psd of the noise, with proper detrending
5) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Add a trend
4) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{41 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, Rectangular window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Rectangular window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{42 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, BH92 window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, BH92 window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{43 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, Hamming window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Hamming window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{44 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, Hanning window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Hanning window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{45 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, Bartlett window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Bartlett window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{46 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, Nuttall3 window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Nuttall3 window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{47 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, Kaiser psll = random window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Kaiser psll = random window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{48 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, Kaiser psll = default window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Kaiser psll = default window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{49 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, Nuttall4 window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, Nuttall4 window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{50 } & \multirow{2}{5cm}{Tests the effect of windowing:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, SFT3F window
3) Apply the detrending and the window manually
4) psd of the noise, without detrending, Rectangular window
5) compares the to psds} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd without detrending, SFT3F window
4) Manually apply window to the data
5) Estimate the psd without detrending, Rectangular window & pass \\ \cline{3-4}
        &    & 1) Check that calculated psds are identical within a part in 10\^12 & pass \\ \hline
 \multirow{2}{3cm}{51 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, random window, set number of
averages
3) check the effective number of averages} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) psd of the noise, without detrending, random window, set number of
averages & pass \\ \cline{3-4}
        &    & 1) Check that calculated navs are identical to those requested & pass \\ \hline
 \multirow{2}{3cm}{52 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run psd again, with the nfft used
6) compare the calculated objects} & 1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run psd again, with the nfft used & pass \\ \cline{3-4}
        &    & 1) Check that calculated objects S1 and S2 are identical & pass \\ \hline
 \multirow{2}{3cm}{53 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run psd again, with the nfft used
6) compare navs, nfft, psds} & 1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run psd again, with the nfft used
6) run psd again, with conflicting parameters, and verify it uses
nfft rather than navs & pass \\ \cline{3-4}
        &    & 1) Check that calculated objects S1 and S2 are identical
2) Check that S3 used different values & pass \\ \hline
 \multirow{2}{3cm}{54 } & \multirow{2}{5cm}{Tests "conservation of energy":
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd order)
2) evaluate the sample mean value m and standard deviation s
3) psd of the white noise
4) compares the sqrt(sum(S * df)) with the standard deviation s} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd & pass \\ \cline{3-4}
        &    & 1) Check that calculated psd energy equals the rms content of the tsdata, estimated by the std of the sample & pass \\ \hline
 \multirow{2}{3cm}{60 } & \multirow{2}{5cm}{Tests the 'basic' call:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, defualt detrending, default window, no averaging} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd with default detrending, default window, no averaging & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{61 } & \multirow{2}{5cm}{Tests the 'basic' call:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, defualt detrending, default window, no averaging} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd with default detrending, default window, no averaging & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{62 } & \multirow{2}{5cm}{Tests the 'basic' call:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, defualt detrending, default window, no averaging} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd with default detrending, default window, no averaging & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{63 } & \multirow{2}{5cm}{Tests the 'basic' call:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) psd of the noise, defualt detrending, default window, no averaging} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Calculate the statistical parameters
3) Estimate the psd with default detrending, default window, no averaging & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
\caption{Unit tests for ao/psd.}
\label{tab:ao_psd}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/rdivide} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP cdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rdivide } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{tests (fsdata and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (AO no data and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and AO no data)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different fs in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x values in fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
\caption{Unit tests for ao/rdivide.}
\label{tab:ao_rdivide}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/real} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the real method works with a vector of AOs as input.} & Test that the real method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the real method works with a matrix of AOs as input.} & Test that the real method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the real method works with a list of AOs as input.} & Test that the real method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the real method works with a mix of different shaped AOs as
input.} & Test that the real method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the real method properly applies history.} & Test that the result of applying the real method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'real'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the real method can modify the input AO.} & Test that the real method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is real(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the real method can modify the single axis controlled by the
plist and the resuld can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the real method applies to the x-axis
2) Check that the real method applies to the y-axis
3) Check that the real method applies to both axes
4) Check that the re-built objects are the same object as 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the real method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the real method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/real] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/real.}
\label{tab:ao_real}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/rebuild} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rebuild method works with a vector of AO objects as input.} & Test that the rebuild method works for a vector of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rebuild method works with a matrix of AO objects as input.} & Test that the rebuild method works for a matrix of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rebuild method works with a list of AO objects as input.} & Test that the rebuild method works for a list of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rebuild method works with a mix of different shaped AO objects
as input.} & Test that the rebuild method works with an input of matrices and vectors
and single AO objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rebuild method properly applies history.} & The method rebuild doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the rebuild method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/rebuild] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/rebuild.}
\label{tab:ao_rebuild}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/resample} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the resample method works with a vector of AOs as input.} & Test that the resample method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the resample method works with a matrix of AOs as input.} & Test that the resample method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the resample method works with a list of AOs as input.} & Test that the resample method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the resample method works with a mix of different shaped AOs as
input.} & Test that the resample method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the resample method properly applies history.} & Test that the result of applying the resample method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'resample'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the resample method can modify the input AO.} & Test that the resample method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is resample(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the resample method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the resample method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/resample] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/resample.}
\label{tab:ao_resample}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/rms} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rms method works with a vector of AOs as input.} & Test that the rms method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rms method works with a matrix of AOs as input.} & Test that the rms method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rms method works with a list of AOs as input.} & Test that the rms method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rms method works with a mix of different shaped AOs as
input.} & Test that the rms method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rms method properly applies history.} & Test that the result of applying the rms method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rms'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the rms method can modify the input AO.} & Test that the rms method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is rms(at1).
3) Check the algorithm & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the rms method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the rms method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/rms] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/rms.}
\label{tab:ao_rms}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/round} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/round] method works with a vector of objects as input.} & Test that the [ao/round] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/round] method works with a matrix of objects as input.} & Test that the [ao/round] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/round] method works with a list of objects as input.} & Test that the [ao/round] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/round] method works with a mix of different arrays of objects as input.} & Tests that the [ao/round] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/round] method properly applies history.} & Test that the result of applying the [ao/round] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/round]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/round] method can modify the input AO.} & Test that the [ao/round] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/round] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/round] method uses the plist to get the axis.} & Test that the [ao/round] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/round] method applies to the x-axis
2) Check that the [ao/round] method applies to the y-axis
3) Check that the [ao/round] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/round] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/round] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/round] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/round.}
\label{tab:ao_round}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/sDomainFit} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the sDomainFit method works with a vector of AOs as input.} & Test that the sDomainFit method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'av'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the sDomainFit method works with a matrix of AOs as input.} & Test that the sDomainFit method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'am'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the sDomainFit method works with a list of AOs as input.} & Test that the sDomainFit method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the sDomainFit method works with a mix of different shaped AOs as
input.} & Test that the sDomainFit method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the sDomainFit method properly applies history.} & Test that the result of applying the sDomainFit method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'sDomainFit'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{sDomainFit cannot modify the input AO.} & Test that the sDomainFit method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Nothing to do. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the sDomainFit method pass back the output objects to a
single variable correctly.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the sDomainFit method return the correct coefficients} & Test that the sDomainFit method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that output contains the correct coefficients. & pass \\ \hline
\caption{Unit tests for ao/sDomainFit.}
\label{tab:ao_sDomainFit}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/save} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the save method works with a vector of AOs as input.} & Test that the save method works for a vector of AOs as input. Test both
formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'atvec'
2) Check that the loaded objects are the same as the saved objects except
the the history because the load-constructor adds one history step.
3) The outputs 'out1' and 'out2' must be the same except the history
properties 'methodInfo', 'plistUsed' and 'proctime'. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the save method works with a matrix of AOs as input.} & Test that the save method works for a matrix of AOs as input. Test both
formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'atmat'
2) Check that the loaded objects are the same as the saved objects except
the the history because the load-constructor adds one history step.
3) The outputs 'out1' and 'out2' must be the same except the history
properties 'methodInfo', 'plistUsed' and 'proctime'. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the save method works with a list of AOs as input.} & Test that the save method works for a list of AOs as input. Test both
formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in the list
2) Check that the loaded objects are the same as the saved objects except
the the history because the load-constructor adds one history step.
3) The outputs 'out1' and 'out2' must be the same except the history
properties 'methodInfo', 'plistUsed' and 'proctime'. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the save method works with a mix of different shaped AOs as
input.} & Test that the save method works with an input of matrices and vectors
and single AOs. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the save method properly applies history.} & Test that the result of applying the save method can be processed back
to an m-file. Do this for both extensions 'mat' and 'xml' & pass \\ \cline{3-4}
        &    & 1) Check that save doesn't add a history step.
2) Check that the read object is the same as the stored object.
save + load doesn't add history.
3) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the save method works with the modify command.} & Test that the modify command. & pass \\ \cline{3-4}
        &    & 1) Check that the save method applies the history.
2) Check the output against the input except the history.
3) Check the history of the output against the input. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the save method uses the filename which is stored in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the save method with an AO with complex data.} & Save an AO with complex fsdata object. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the save method with an AO which is created from a pole/zero model} & Save an AO which is created from a pzmodel. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Test the save method with a complex plist which builds the AO} & Save an AO which is created from a complex plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for ao/save.}
\label{tab:ao_save}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/scale} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/scale] method works with a vector of objects as input.} & Test that the [ao/scale] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/scale] method works with a matrix of objects as input.} & Test that the [ao/scale] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/scale] method works with a list of objects as input.} & Test that the [ao/scale] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/scale] method works with a mix of different arrays of objects as input.} & Tests that the [ao/scale] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/scale] method properly applies history.} & Test that the result of applying the [ao/scale] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/scale]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/scale] method can modify the input AO.} & Test that the [ao/scale] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/scale] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/scale] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/scale] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/scale] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/scale.}
\label{tab:ao_scale}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/search} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the search method works with a vector of AOs as input.} & Test that the search method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' are the same as in 'atvec'
2) Check that the number of elements in 'out2'
3) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the search method works with a matrix of AOs as input.} & Test that the search method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' are the same as in 'atmat'
2) Check that the number of elements in 'out2'
3) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the search method works with a list of AOs as input.} & Test that the search method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' are the same as the input
2) Check that the number of elements in 'out2'
3) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the search method works with a mix of different shaped AOs as
input.} & Test that the search method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' are the same as the input
2) Check that the number of elements in 'out2'
3) Check that 'out3' doesn't contain an AO
4) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the search method properly applies history.} & Test that the result of applying the search method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'search'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the modifier call for the search method doesn't work.} & Tests that the modifier call for the search method doesn't work. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Check that the search method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/search.}
\label{tab:ao_search}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/select} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the select method works with a vector of AOs as input.} & Test that the select method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the select method works with a matrix of AOs as input.} & Test that the select method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the select method works with a list of AOs as input.} & Test that the select method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the select method works with a mix of different shaped AOs
as input.} & Test that the select method works with an input of matrices and
vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the select method properly applies history.} & Test that the result of applying the select method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'select'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the select method can modify the input AO.} & Test that the select method can modify the input AO by calling with
no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the selected value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the select method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the select method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test that the select method uses the plist to select the samples.} & Test that the select method uses the plist to select the samples. & pass \\ \cline{3-4}
        &    & 1) Check that the select method uses the samples in the plist
2) Check that the select method uses the samples in the plist and input
3) Check that the select method uses the samples in the plist and input
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/select] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Test that the select method also select the 'dx' and 'dy' values.} & Test that the select method also select the 'dx' and 'dy' values. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the re-built object is the same as in 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Test that the select method updates the t0.} & Test that the select method updates the t0. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the re-built object is the same as in 'out'. & pass \\ \hline
\caption{Unit tests for ao/select.}
\label{tab:ao_select}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setDescription} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setDescription method works with a vector of AOs as input.} & Test that the setDescription method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setDescription method works with a matrix of AOs as input.} & Test that the setDescription method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setDescription method works with a list of AOs as input.} & Test that the setDescription method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setDescription method works with a mix of different shaped AOs as
input.} & Test that the setDescription method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setDescription method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setDescription method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setDescription'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setDescription'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setDescription method can modify the input AO.} & Test that the setDescription method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct description field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setDescription method can set the property with a plist.} & Test that the setDescription method can modify the property 'description'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct description field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setDescription method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setDescription] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setDescription.}
\label{tab:ao_setDescription}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setFs} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setFs method works with a vector of AOs as input.} & Test that the setFs method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'avec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setFs method works with a matrix of AOs as input.} & Test that the setFs method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'amat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setFs method works with a list of AOs as input.} & Test that the setFs method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setFs method works with a mix of different shaped AOs as
input.} & Test that the setFs method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setFs method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setFs method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setFs'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setFs'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setFs method can modify the input AO.} & Test that the setFs method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct fs field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setFs method can set the property with a plist.} & Test that the setFs method can modify the property 'fs'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct fs field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setFs method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setFs] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setFs.}
\label{tab:ao_setFs}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setName} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setName method works with a vector of AOs as input.} & Test that the setName method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setName method works with a matrix of AOs as input.} & Test that the setName method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setName method works with a list of AOs as input.} & Test that the setName method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setName method works with a mix of different shaped AOs as
input.} & Test that the setName method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setName method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setName method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setName'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setName'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setName method can modify the input AO.} & Test that the setName method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setName method can set the property with a plist.} & Test that the setName method can modify the property 'name'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setName method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setName] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setName.}
\label{tab:ao_setName}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setPlotinfo} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setPlotinfo method works with a vector of AOs as input.} & Test that the setPlotinfo method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setPlotinfo method works with a matrix of AOs as input.} & Test that the setPlotinfo method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setPlotinfo method works with a list of AOs as input.} & Test that the setPlotinfo method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setPlotinfo method works with a mix of different shaped AOs as
input.} & Test that the setPlotinfo method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setPlotinfo method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setPlotinfo method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setPlotinfo'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setPlotinfo'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setPlotinfo method can modify the input AO.} & Test that the setPlotinfo method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct plotinfo field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setPlotinfo method can set the property with a plist.} & Test that the setPlotinfo method can modify the property 'plotinfo'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct plotinfo field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setPlotinfo method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/setPlotinfo.}
\label{tab:ao_setPlotinfo}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setT0} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setT0 method works with a vector of AOs as input.} & Test that the setT0 method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'avec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setT0 method works with a matrix of AOs as input.} & Test that the setT0 method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'amat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setT0 method works with a list of AOs as input.} & Test that the setT0 method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setT0 method works with a mix of different shaped AOs as
input.} & Test that the setT0 method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setT0 method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setT0 method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setT0'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setT0'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setT0 method can modify the input AO.} & Test that the setT0 method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct t0 field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setT0 method can set the property with a plist.} & Test that the setT0 method can modify the property 't0'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct t0 field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setT0 method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setT0] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setT0.}
\label{tab:ao_setT0}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setX} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setX method works with a vector of AOs as input.} & Test that the setX method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'avec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setX method works with a matrix of AOs as input.} & Test that the setX method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'amat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setX method works with a list of AOs as input.} & Test that the setX method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setX method works with a mix of different shaped AOs as
input.} & Test that the setX method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setX method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setX method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setX'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setX'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setX method can modify the input AO.} & Test that the setX method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct 'x' field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setX method can set the property with a plist.} & Test that the setX method can modify the property 'x'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct x field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the setX method keeps the shape of the data.} & Test that the setX method keeps the shape of the data. Independent of the
input & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the setX method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setX] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setX.}
\label{tab:ao_setX}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setXY} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setXY method works with a vector of AOs as input.} & Test that the setXY method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'avec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setXY method works with a matrix of AOs as input.} & Test that the setXY method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'amat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setXY method works with a list of AOs as input.} & Test that the setXY method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setXY method works with a mix of different shaped AOs as
input.} & Test that the setXY method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setXY method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setXY method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setXY'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setXY'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setXY method can modify the input AO.} & Test that the setXY method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct 'x' and 'y' field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setXY method can set the property with a plist.} & Test that the setXY method can modify the property 'x' and 'y'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct x and y fields
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the setXY method keeps the shape of the data.} & Test that the setXY method keeps the shape of the data. Independent of the
input & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the setXY method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setXY] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setXY.}
\label{tab:ao_setXY}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setXunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setXunits method works with a vector of AOs as input.} & Test that the setXunits method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'avec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setXunits method works with a matrix of AOs as input.} & Test that the setXunits method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'amat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setXunits method works with a list of AOs as input.} & Test that the setXunits method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setXunits method works with a mix of different shaped AOs as
input.} & Test that the setXunits method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setXunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setXunits method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setXunits'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setXunits'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setXunits method can modify the input AO.} & Test that the setXunits method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct xunits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setXunits method can set the property with a plist.} & Test that the setXunits method can modify the property 'xunits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct xunits field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setXunits method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setXunits] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setXunits.}
\label{tab:ao_setXunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setY} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setY method works with a vector of AOs as input.} & Test that the setY method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setY method works with a matrix of AOs as input.} & Test that the setY method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setY method works with a list of AOs as input.} & Test that the setY method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setY method works with a mix of different shaped AOs as
input.} & Test that the setY method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setY method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setY method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setY'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setY'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setY method can modify the input AO.} & Test that the setY method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct 'y' field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setY method can set the property with a plist.} & Test that the setY method can modify the property 'y'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct y field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the setY method keeps the shape of the data.} & Test that the setY method keeps the shape of the data. Independent of the
input & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the setY method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setY] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setY.}
\label{tab:ao_setY}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/setYunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setYunits method works with a vector of AOs as input.} & Test that the setYunits method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setYunits method works with a matrix of AOs as input.} & Test that the setYunits method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setYunits method works with a list of AOs as input.} & Test that the setYunits method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setYunits method works with a mix of different shaped AOs as
input.} & Test that the setYunits method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setYunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setYunits method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setYunits'.
1) Check that the last entry in the history of 'out2' NOT corresponds to
'setYunits'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setYunits method can modify the input AO.} & Test that the setYunits method can modify the input AO by calling with no
output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' has the correct yunits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setYunits method can set the property with a plist.} & Test that the setYunits method can modify the property 'yunits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct yunits field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setYunits method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/setYunits] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/setYunits.}
\label{tab:ao_setYunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/sign} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/sign] method works with a vector of objects as input.} & Test that the [ao/sign] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/sign] method works with a matrix of objects as input.} & Test that the [ao/sign] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/sign] method works with a list of objects as input.} & Test that the [ao/sign] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/sign] method works with a mix of different arrays of objects as input.} & Tests that the [ao/sign] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/sign] method properly applies history.} & Test that the result of applying the [ao/sign] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/sign]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/sign] method can modify the input AO.} & Test that the [ao/sign] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/sign] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/sign] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/sign] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/sign] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/sign.}
\label{tab:ao_sign}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/simplifyYunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the simplifyYunits method works with a vector of AOs as
input.} & Test that the simplifyYunits method works for a vector of AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the simplifyYunits method works with a matrix of AOs as
input.} & Test that the simplifyYunits method works for a matrix of AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the simplifyYunits method works with a list of AOs as input.} & Test that the simplifyYunits method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the simplifyYunits method works with a mix of different
shaped AOs as input.} & Test that the simplifyYunits method works with an input of matrices
and vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the simplifyYunits method properly applies history.} & Test that the result of applying the simplifyYunits method can be
processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'simplifyYunits'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the simplifyYunits method can modify the input AO.} & Test that the simplifyYunits method can modify the input AO by
calling with no output and that the method doesn't change the input
of the function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input simplifies the y-units of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Check that the simplifyYunits method pass back the output objects to a
list of output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test that the simplifyYunits works for different complex y-units.} & Test that the simplifyYunits works for different complex y-units. & pass \\ \cline{3-4}
        &    & 1) Check that the correct data
2) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test that the simplifyYunits works with a exception list.} & Test that the simplifyYunits works with a exception list. & pass \\ \cline{3-4}
        &    & 1) Check that the correct data
2) Check that the re-built object is the same as in 'out[1..2]'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/simplifyYunits] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Test that the simplifyYunits doesn't apply the prefixes to the data.} & Test that the simplifyYunits doesn't apply the prefixes to the data. & pass \\ \cline{3-4}
        &    & 1) Check that the correct data
2) Check that the re-built object is the same as in 'out[1..2]'. & pass \\ \hline
\caption{Unit tests for ao/simplifyYunits.}
\label{tab:ao_simplifyYunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/sin} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/sin] method works with a vector of objects as input.} & Test that the [ao/sin] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/sin] method works with a matrix of objects as input.} & Test that the [ao/sin] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/sin] method works with a list of objects as input.} & Test that the [ao/sin] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/sin] method works with a mix of different arrays of objects as input.} & Tests that the [ao/sin] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/sin] method properly applies history.} & Test that the result of applying the [ao/sin] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/sin]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/sin] method can modify the input AO.} & Test that the [ao/sin] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/sin] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/sin] method uses the plist to get the axis.} & Test that the [ao/sin] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/sin] method applies to the x-axis
2) Check that the [ao/sin] method applies to the y-axis
3) Check that the [ao/sin] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/sin] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/sin] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/sin] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/sin.}
\label{tab:ao_sin}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/smoother} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the smoother method works with a vector of AOs as input.} & Test that the smoother method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the smoother method works with a matrix of AOs as input.} & Test that the smoother method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the smoother method works with a list of AOs as input.} & Test that the smoother method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the smoother method works with a mix of different shaped AOs as
input.} & Test that the smoother method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the smoother method properly applies history.} & Test that the result of applying the smoother method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'smoother'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the smoother method can modify the input AO.} & Test that the smoother method can modify the input AO by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is smoother(at5). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the smoother method keeps the data shape of the input object.} & Test that the smoother method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the smoother method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/smoother] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/smoother.}
\label{tab:ao_smoother}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/sort} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the sort method works with a vector of AOs as input.} & Test that the sort method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the sort method works with a matrix of AOs as input.} & Test that the sort method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the sort method works with a list of AOs as input.} & Test that the sort method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the sort method works with a mix of different shaped AOs as
input.} & Test that the sort method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the sort method properly applies history.} & Test that the result of applying the sort method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'sort'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the sort method can modify the input AO.} & Test that the sort method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the sort value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the sort method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the sort method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test that the sort method uses the plist to sort on the x- or y- axis} & Test that the sort method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the sort method applies to the y-axis in ascend direction
2) Check that the sort method applies to the y-axis in descend direction
3) Check that the sort method applies to the x-axis in ascend direction
4) Check that the sort method applies to the x-axis in descend direction
5) Check that the re-built object is the same as in 'out[1..4]'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/sort] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/sort.}
\label{tab:ao_sort}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/spectrogram} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the spectrogram method works with a vector of AOs as input.} & Test that the spectrogram method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the spectrogram method works with a matrix of AOs as input.} & Test that the spectrogram method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the spectrogram method works with a list of AOs as input.} & Test that the spectrogram method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the spectrogram method works with a mix of different shaped AOs as
input.} & Test that the spectrogram method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the spectrogram method properly applies history.} & Test that the result of applying the spectrogram method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'spectrogram'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/spectrogram] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/spectrogram.}
\label{tab:ao_spectrogram}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf split/chunks} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the split method works with a vector of AOs as input.} & Test that the split method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the split method works with a matrix of AOs as input.} & Tests that the split method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the split method works with a list of AOs as input.} & Tests that the split method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the split method works with a mix of different shaped AOs as
input.} & Tests that the split method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the split method properly applies history.} & Test that the result of applying the split method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'split'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{The split method can not modify the input AO.} & The split method can not modify the input AO. & pass \\ \cline{3-4}
        &    & 1) Nothind to do. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the split method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the split method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the split method accepts both key-words 'N' and 'chunks'.} & Check that the split method accepts both key-words 'N' and 'chunks'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [split/chunks] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the split method works also split 'dx' and 'dy'.} & Tests that the split method works also split 'dx' and 'dy'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the split method ignores the samples which doesn't fit.} & Check that the split method ignores the samples which doesn't fit.
Use for this test the key-word 'match' & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.} & Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option. & pass \\ \cline{3-4}
        &    & 1) Check the outputs
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for split/chunks.}
\label{tab:split_chunks}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf split/interval} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the split method works with a vector of AOs as input.} & Test that the split method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'avec' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the split method works with a matrix of AOs as input.} & Tests that the split method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'amat' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the split method works with a list of AOs as input.} & Tests that the split method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'amat' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the split method works with a mix of different shaped AOs as
input.} & Tests that the split method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'amat' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the split method properly applies history.} & Test that the result of applying the split method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'split'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{The split method can not modify the input AO.} & The split method can not modify the input AO. & pass \\ \cline{3-4}
        &    & 1) Nothind to do. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the split method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the split method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the split method can handle AO which have a collaped x-axis.} & Check that the split method can handle AO which have a collaped x-axis. & pass \\ \cline{3-4}
        &    & 1) Check the number of outputs
2) Check the output
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [split/interval] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the split method uses the key-words: start\_time and duration} & Check that the split method uses the key-words: start\_time and
duration & pass \\ \cline{3-4}
        &    & 1) Check the number of outputs
2) Check the output
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the split method uses the key-words: timespan} & Check that the split method uses the key-words: timespan & pass \\ \cline{3-4}
        &    & 1) Check the number of outputs
2) Check the output
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Check that the split method uses the key-words: start\_time and end\_time} & Check that the split method uses the key-words: start\_time and end\_time & pass \\ \cline{3-4}
        &    & 1) Check the number of outputs
2) Check the output
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.
Check that the interval can be passed via two time objects.} & Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.
Check that the interval can be passed via two time objects. & pass \\ \cline{3-4}
        &    & 1) Check the outputs
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.
Check that the interval can be passed via two time strings.} & Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.
Check that the interval can be passed via two time strings. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.
Check that the interval can be passed via one timespan object.} & Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.
Check that the interval can be passed via one timespan object. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.
Check that the interval can be passed via one timespan object.} & Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.
Check that the interval can be passed via one timespan object. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for split/interval.}
\label{tab:split_interval}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf split/samples} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the split method works with a vector of AOs as input.} & Test that the split method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'atvec' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the split method works with a matrix of AOs as input.} & Tests that the split method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'atmat' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the split method works with a list of AOs as input.} & Tests that the split method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'atvec' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the split method works with a mix of different shaped AOs as
input.} & Tests that the split method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'atvec' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the split method properly applies history.} & Test that the result of applying the split method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'split'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{The split method can not modify the input AO.} & The split method can not modify the input AO. & pass \\ \cline{3-4}
        &    & 1) Nothind to do. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the split method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the split method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test that the split method also splits the 'dx' and 'dy' values.} & Test that the split method also splits the 'dx' and 'dy' values. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the re-built object is the same as in 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [split/samples] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option.} & Check that the split method works with notequal sampled data.
Check that the split method works with 'timeshift' option. & pass \\ \cline{3-4}
        &    & 1) Check the outputs
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for split/samples.}
\label{tab:split_samples}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf times/frequ} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the split method works with a vector of AOs as input.} & Test that the split method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'atvec' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the split method works with a matrix of AOs as input.} & Tests that the split method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'atvec' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the split method works with a list of AOs as input.} & Tests that the split method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'atvec' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the split method works with a mix of different shaped AOs as
input.} & Tests that the split method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
'atvec' times numbers of intervals
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the split method properly applies history.} & Test that the result of applying the split method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'split'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{The split method can not modify the input AO.} & The split method can not modify the input AO. & pass \\ \cline{3-4}
        &    & 1) Nothind to do. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the split method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the split method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the split method interprets a negative end interval as a
indicates count from end and a zero for the and interval as the end of
the vector.} & Check this behavior for time-series data. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [times/frequ] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the split method works with notequal sampled data.} & Check that the split method works with notequal sampled data. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the split method also split 'dx' and 'dy'.} & Check that the split method also split 'dx' and 'dy' if this values
have the same length of the y-values. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Check that the split method interprets a negative end interval as a
indicates count from end and a zero for the and interval as the end of
the vector.} & Check this behavior for frequency-series data. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'.
3) Check that the output have the same 'fs', 'enbw', 'navs', 'xunits'
and 'yunits' & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Check that the split method works with notequal sampled data.
Check that the interval can be passed via an array of double.
Check that the split method works with 'timeshift' option.} & Check that the split method works with notequal sampled data.
Check that the interval can be passed via an array of double.
Check that the split method works with 'timeshift' option. & pass \\ \cline{3-4}
        &    & 1) Check the outputs
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Check that the split method works with time intervals which doesn'
match the sample frequency.} & Check that the split method works with time intervals which doesn'
match the sample frequency. & pass \\ \cline{3-4}
        &    & 1) Check the outputs
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for times/frequ.}
\label{tab:times_frequ}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/sqrt} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/sqrt] method works with a vector of objects as input.} & Test that the [ao/sqrt] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/sqrt] method works with a matrix of objects as input.} & Test that the [ao/sqrt] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/sqrt] method works with a list of objects as input.} & Test that the [ao/sqrt] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/sqrt] method works with a mix of different arrays of objects as input.} & Tests that the [ao/sqrt] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/sqrt] method properly applies history.} & Test that the result of applying the [ao/sqrt] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/sqrt]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/sqrt] method can modify the input AO.} & Test that the [ao/sqrt] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/sqrt] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/sqrt] method uses the plist to get the axis.} & Test that the [ao/sqrt] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/sqrt] method applies to the x-axis
2) Check that the [ao/sqrt] method applies to the y-axis
3) Check that the [ao/sqrt] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/sqrt] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/sqrt] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/sqrt] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/sqrt.}
\label{tab:ao_sqrt}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/std} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/std] method works with a vector of objects as input.} & Test that the [ao/std] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/std] method works with a matrix of objects as input.} & Test that the [ao/std] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/std] method works with a list of objects as input.} & Test that the [ao/std] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/std] method works with a mix of different arrays of objects as input.} & Tests that the [ao/std] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/std] method properly applies history.} & Test that the result of applying the [ao/std] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/std]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/std] method can modify the input AO.} & Test that the [ao/std] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/std] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{108 } & \multirow{2}{5cm}{Test that the [ao/std] method uses the plist to get the axis. This is
intended to test methods like ao/mean and ao/std which return different
data types depending on which axis is selected.} & Test that the [ao/std] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/std] method applies to the x-axis
2) Check that the [ao/std] method applies to the y-axis
3) Check that the [ao/std] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/std] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/std] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/std] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/std.}
\label{tab:ao_std}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the string method works with a vector of AO objects as input.} & Test that the string method works for a vector of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the string method works with a matrix of AO objects as input.} & Test that the string method works for a matrix of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the string method works with a list of AO objects as input.} & Test that the string method works for a list of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the string method works with a mix of different shaped AO objects
as input.} & Test that the string method works with an input of matrices and vectors
and single AO objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the string method properly applies history.} & The method string doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the string method doesn't work if the AO object have more
than one history step.} & The method string throws an error because the input object have more than
one history step. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for ao/string.}
\label{tab:ao_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/sum} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/sum] method works with a vector of objects as input.} & Test that the [ao/sum] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/sum] method works with a matrix of objects as input.} & Test that the [ao/sum] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/sum] method works with a list of objects as input.} & Test that the [ao/sum] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/sum] method works with a mix of different arrays of objects as input.} & Tests that the [ao/sum] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/sum] method properly applies history.} & Test that the result of applying the [ao/sum] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/sum]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/sum] method can modify the input AO.} & Test that the [ao/sum] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/sum] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{108 } & \multirow{2}{5cm}{Test that the [ao/sum] method uses the plist to get the axis. This is
intended to test methods like ao/mean and ao/std which return different
data types depending on which axis is selected.} & Test that the [ao/sum] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/sum] method applies to the x-axis
2) Check that the [ao/sum] method applies to the y-axis
3) Check that the [ao/sum] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/sum] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/sum] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/sum] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/sum.}
\label{tab:ao_sum}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/sumjoin} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the sumjoin method works with a vector of AOs as input.} & Test that the sumjoin method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO
2) Check that the output have the correct data.
3) Check the rebuilt object & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the sumjoin method works with a matrix of AOs as input.} & Tests that the sumjoin method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO
2) Check that the output have the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the sumjoin method works with a list of AOs as input.} & Tests that the sumjoin method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO
2) Check that the output have the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the sumjoin method works with a mix of different shaped AOs as
input.} & Tests that the sumjoin method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one AO
2) Check that the output have the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the sumjoin method properly applies history.} & Test that the result of applying the sumjoin method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'sumjoin'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the sumjoin method can modify the input AO.} & Test that the sumjoin method can modify the input AO by calling with
no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input have the new data
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the sumjoin method keeps the data shape of the input
object. The input AO must be an AO with row data and an AO with
column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
\caption{Unit tests for ao/sumjoin.}
\label{tab:ao_sumjoin}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/svd} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the svd method works with a vector of AOs as input.} & Test that the svd method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the svd method works with a matrix of AOs as input.} & Test that the svd method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the svd method works with a list of AOs as input.} & Test that the svd method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the svd method works with a mix of different shaped AOs as
input.} & Test that the svd method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the svd method properly applies history.} & Test that the result of applying the svd method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'svd'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the svd method can modify the input AO.} & Test that the svd method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at4' and 'ain' are now different.
2) Check that 'ain' is svd(at4). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the svd method can modify the single axis controlled by the
plist and the resuld can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the svd method applies with different options.
2) Check that the re-built objects are the same object as 'out[1..2]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the svd method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the svd method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/svd.}
\label{tab:ao_svd}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/t0} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the t0 method works with a vector of AOs as input.} & The t0 method doesn't work with a vector of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the t0 method works with a matrix of AOs as input.} & The t0 method doesn't work with a matrix of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the t0 method works with a list of AOs as input.} & The t0 method doesn't work with a list of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the t0 method works with a mix of different shaped AOs as
input.} & The t0 method can only return the t0 value of one AO. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the t0 method properly applies history.} & The t0 method doesn't change the AO, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the t0 method works for AOs with different data objects.} & Test that the t0 method returns the t0 value for AOs with cdata,
fsdata, tsdata and xydata objects. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for ao/t0.}
\label{tab:ao_t0}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/tan} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/tan] method works with a vector of objects as input.} & Test that the [ao/tan] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/tan] method works with a matrix of objects as input.} & Test that the [ao/tan] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/tan] method works with a list of objects as input.} & Test that the [ao/tan] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/tan] method works with a mix of different arrays of objects as input.} & Tests that the [ao/tan] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/tan] method properly applies history.} & Test that the result of applying the [ao/tan] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/tan]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/tan] method can modify the input AO.} & Test that the [ao/tan] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/tan] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/tan] method uses the plist to get the axis.} & Test that the [ao/tan] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/tan] method applies to the x-axis
2) Check that the [ao/tan] method applies to the y-axis
3) Check that the [ao/tan] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/tan] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/tan] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/tan] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/tan.}
\label{tab:ao_tan}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/tfe} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the tfe method works with a vector of AOs as input.} & Test that the tfe method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the tfe method doesn't work with a matrix of AOs as input.} & Test that the tfe method doesn't work for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the tfe method works with a list of AOs as input.} & Test that the tfe method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the tfe method doesn't work with a mix of different shaped
AOs as input.} & Test that the tfe method doesn't work with an input of matrices and
vectors and single AOs. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the tfe method properly applies history.} & Test that the result of applying the tfe method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'tfe'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the tfe method can not modify the input AO.} & Test that the tfe method can not modify the input AO.
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the plus method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the output data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the tfe method pass back the output objects to a list of
output variables or to a single variable.} & This test is not longer necessary because the tfe method pass back
always only one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the tfe method agrees with MATLAB's tfestimate when
configured to use the same parameters.} & Test that applying tfe works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that output agrees with the output of MATLAB's tfestimate. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/tfe] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that differently sized data sets are treated properly} & Test that applying tfe works on two AOs. & pass \\ \cline{3-4}
        &    & 1) Check that tfe used the length of the shortest ao. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) tfe of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) tfe of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated tfe yunits) equals [1/Hz] & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) tfe of the 2 series, without detrending, random window, set number of
averages
3) check the effective number of averages} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) tfe of the 2 series, without detrending, random window, set number of
averages & pass \\ \cline{3-4}
        &    & 1) Check that calculated navs are identical to those requested & pass \\ \hline
 \multirow{2}{3cm}{22 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from uniform pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) tfe of the time series, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run tfe again, with the nfft used
6) compare the calculated objects} & 1) white noise produced from uniform pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) tfe of the time series, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run tfe again, with the nfft used & pass \\ \cline{3-4}
        &    & 1) Check that calculated objects T1 and T2 are identical & pass \\ \hline
 \multirow{2}{3cm}{23 } & \multirow{2}{5cm}{Tests the possibility to set the number of averages rather than setting the Nfft:
1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) tfe of the time series, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run tfe again, with the nfft used
6) compare navs, nfft, tfes} & 1) white noise produced from normal pdf, with:
a given mean value and sigma (distribution's 1st and 2nd order)
2) tfe of the time series, without detrending, random window, random navs
3) get the number of averages
4) get the nfft used
5) run tfe again, with the nfft used
6) run tfe again, with conflicting parameters, and verify it uses
nfft rather than navs & pass \\ \cline{3-4}
        &    & 1) Check that calculated objects T1 and T2 are identical
2) Check that T3 used different values & pass \\ \hline
 \multirow{2}{3cm}{25 } & \multirow{2}{5cm}{Tests handling of units:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
3) tfe of the white noise series
4) compares the units of the input and output} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
white noise from normal distribution + offset
4) Assign a random unit
5) tfe of the white noise & pass \\ \cline{3-4}
        &    & 1) Check that (calculated tfe yunits) equals [1/Hz] & pass \\ \hline
 \multirow{2}{3cm}{30 } & \multirow{2}{5cm}{Tests handling of special cases:
1) white noise produced from normal pdf, with a given mean value and
sigma (distribution's 1st and 2nd orders)
2) the same noise series
3) tfe of the white noise series
4) compares the output to unity} & 1) Prepare the test tsdata:
white noise from normal distribution + offset
2) Assign a random unit
3) Prepare the test tsdata:
the same data as 1) and 2)
4) tfe of the series & pass \\ \cline{3-4}
        &    & 1) Check that calculated tfe equals 1 & pass \\ \hline
\caption{Unit tests for ao/tfe.}
\label{tab:ao_tfe}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/times} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (tsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (fsdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (xydata and cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule1 (cdata and xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 1.} & Tests the arithmetic operators rule 1 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test element-wise operator rule1 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (vector cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule2 (single cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 2.} & Tests the arithmetic operators rule 2 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule2 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule3 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 3.} & Tests the arithmetic operators rule 3 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule3 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule4 (vector cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 4.} & Tests the arithmetic operators rule 4 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule4 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP tsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP fsdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP xydata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (NxP cdata and single cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule5 (single cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 5.} & Tests the arithmetic operators rule 5 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule5 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule6 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 6.} & Tests the arithmetic operators rule 6 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule6 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule7 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 7.} & Tests the arithmetic operators rule 7 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule7 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP tsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP fsdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP xydata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (NxP cdata and vector cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule8 (vector cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 8.} & Tests the arithmetic operators rule 8 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule8 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP tsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP fsdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP xydata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxP cdata and NxQ cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule9 (NxQ cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 9.} & Tests the arithmetic operators rule 9 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule9 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP tsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP tsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP fsdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP fsdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP xydata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP xydata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{rule10 (NxP cdata and NxP cdata)} & \multirow{2}{5cm}{Tests the arithmetic operators rule 10.} & Tests the arithmetic operators rule 10 for each data type: xydata,
fsdata, tsdata, cdata and useful combinations. & pass \\ \cline{3-4}
        &    & Here we test  element-wise operator rule10 as in S2-AEI-TN-3059.
1) Check the data type of the resulting object.
2) Check the resulting object contains the correct values.
3) Check the error propagation.
4) Check the units of the output object.
5) Check the resulting object can be rebuilt. & pass \\ \hline
 \multirow{2}{3cm}{times } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{tests (fsdata and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (AO no data and tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (tsdata and AO no data)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different fs in tsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (different x values in fsdata)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
 \multirow{2}{3cm}{tests (negative test)} & \multirow{2}{5cm}{Tests all arithmetic operations which are not allowed.} & Tests all arithmetic operations which are not allowed. & pass \\ \cline{3-4}
        &    & Here we test some negative cases. & pass \\ \hline
\caption{Unit tests for ao/times.}
\label{tab:ao_times}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/timeshift} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the timeshift method works with a vector of AOs as input.} & Test that the timeshift method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the timeshift method works with a matrix of AOs as input.} & Test that the timeshift method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the timeshift method works with a list of AOs as input.} & Test that the timeshift method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the timeshift method works with a mix of different shaped AOs as
input.} & Test that the timeshift method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the timeshift method properly applies history.} & Test that the result of applying the timeshift method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'timeshift'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the timeshift method can modify the input AO.} & Test that the timeshift method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is timeshift(at1).
3) Check the algorithm & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the timeshift method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the timeshift method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/timeshift] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/timeshift.}
\label{tab:ao_timeshift}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/transpose} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/transpose] method works with a vector of objects as input.} & Test that the [ao/transpose] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/transpose] method works with a matrix of objects as input.} & Test that the [ao/transpose] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/transpose] method works with a list of objects as input.} & Test that the [ao/transpose] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/transpose] method works with a mix of different arrays of objects as input.} & Tests that the [ao/transpose] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/transpose] method properly applies history.} & Test that the result of applying the [ao/transpose] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/transpose]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the transpose method can modify the input AO.} & Test that the transpose method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is transpose(at1). & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the abs method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/transpose] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/transpose] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/transpose.}
\label{tab:ao_transpose}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/type} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the type method works with a vector of AO objects as input.} & Test that the type method works for a vector of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the type method works with a matrix of AO objects as input.} & Test that the type method works for a matrix of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the type method works with a list of AO objects as input.} & Test that the type method works for a list of AO objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the type method works with a mix of different shaped AO objects
as input.} & Test that the type method works with an input of matrices and vectors
and single AO objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the type method properly applies history.} & The method type doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for ao/type.}
\label{tab:ao_type}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/uminus} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/uminus] method works with a vector of objects as input.} & Test that the [ao/uminus] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/uminus] method works with a matrix of objects as input.} & Test that the [ao/uminus] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/uminus] method works with a list of objects as input.} & Test that the [ao/uminus] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/uminus] method works with a mix of different arrays of objects as input.} & Tests that the [ao/uminus] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/uminus] method properly applies history.} & Test that the result of applying the [ao/uminus] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/uminus]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/uminus] method can modify the input AO.} & Test that the [ao/uminus] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/uminus] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the [ao/uminus] method uses the plist to get the axis.} & Test that the [ao/uminus] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/uminus] method applies to the x-axis
2) Check that the [ao/uminus] method applies to the y-axis
3) Check that the [ao/uminus] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/uminus] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/uminus] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/uminus] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/uminus.}
\label{tab:ao_uminus}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/unwrap} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the unwrap method works with a vector of AOs as input.} & Test that the unwrap method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'avec'
2) Check that each ouput corrects the phase angles & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the unwrap method works with a matrix of AOs as input.} & Tests that the unwrap method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'amat'
2) Check that each ouput corrects the phase angles & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the unwrap method works with a list of AOs as input.} & Tests that the unwrap method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the
input
2) Check that each ouput corrects the phase angles & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the unwrap method works with a mix of different shaped AOs
as input.} & Tests that the unwrap method works with a mix of different shaped AOs
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the
input
2) Check that each ouput corrects the phase angles & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the unwrap method properly applies history.} & Test that the result of applying the unwrap method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'unwrap'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the unwrap method can modify the input AO.} & Test that the unwrap method can modify the input AO by calling with
no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the unwraped value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the unwrap method uses the plist to get the axis.} & Test that the unwrap method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the unwrap method applies to the x-axis
2) Check that the unwrap method applies to the y-axis
3) Check that the unwrap method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the unwrap method keeps the data shape of the input object.
The input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the unwrap method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/unwrap] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/unwrap.}
\label{tab:ao_unwrap}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/upsample} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the upsample method works with a vector of AOs as input.} & Test that the upsample method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the upsample method works with a matrix of AOs as input.} & Test that the upsample method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the upsample method works with a list of AOs as input.} & Test that the upsample method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the upsample method works with a mix of different shaped AOs as
input.} & Test that the upsample method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the upsample method properly applies history.} & Test that the result of applying the upsample method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'upsample'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the upsample method can modify the input AO.} & Test that the upsample method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is upsample(at1).
3) Check the algorithm & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the upsample method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the upsample method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/upsample] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/upsample.}
\label{tab:ao_upsample}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/var} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ao/var] method works with a vector of objects as input.} & Test that the [ao/var] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ao/var] method works with a matrix of objects as input.} & Test that the [ao/var] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ao/var] method works with a list of objects as input.} & Test that the [ao/var] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ao/var] method works with a mix of different arrays of objects as input.} & Tests that the [ao/var] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ao/var] method properly applies history.} & Test that the result of applying the [ao/var] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ao/var]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the [ao/var] method can modify the input AO.} & Test that the [ao/var] method can modify the input object by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the [ao/var] value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{108 } & \multirow{2}{5cm}{Test that the [ao/var] method uses the plist to get the axis. This is
intended to test methods like ao/mean and ao/std which return different
data types depending on which axis is selected.} & Test that the [ao/var] method uses the plist to get the axis. & pass \\ \cline{3-4}
        &    & 1) Check that the [ao/var] method applies to the x-axis
2) Check that the [ao/var] method applies to the y-axis
3) Check that the [ao/var] method applies to both axes
4) Check that the re-built object is the same as in 'out[1..3]'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the shape of the data in AOs.} & Test that the [ao/var] method keeps the data shape of the input object. The
input AO data must be an array with row data and/or column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the [ao/var] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/var] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/var.}
\label{tab:ao_var}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/whiten1D} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the whiten1D method works with a vector of AOs as input.} & Test that the whiten1D method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atvec'
2) Check that each output AO contains the correct data.
3) Check that each output AO contains empty yunits & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the whiten1D method works with a matrix of AOs as input.} & Test that the whiten1D method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data.
3) Check that each output AO contains empty yunits & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the whiten1D method works with a list of AOs as input.} & Test that the whiten1D method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data.
3) Check that each output AO contains empty yunits & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the whiten1D method works with a mix of different shaped AOs as
input.} & Test that the whiten1D method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data.
3) Check that each output AO contains empty yunits & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the whiten1D method properly applies history.} & Test that the result of applying the whiten1D method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'whiten1D'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the whiten1D method can modify the input AO.} & Test that the whiten1D method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is whiten1D(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the whiten1D method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change.
2) Check that the output AOs have empty yunits & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the whiten1D method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the whiten1D method is capable to increase spectral flatness
in case of no model input} & Generate a fixed series of noise data, apply a filter to colour data
and run the method with a certain number of parameters. & pass \\ \cline{3-4}
        &    & 1) Check that the output spectrum is flatter than input colored
spectrum
2) Check that the output AOs have empty yunits & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the whiten1D method is capable to increase spectral flatness
when a model is input} & Generate a fixed series of noise data, apply a filter to colour data
and run the method with a certain number of parameters. & pass \\ \cline{3-4}
        &    & 1) Check that the output spectrum is flatter than input colored
spectrum & pass \\ \hline
\caption{Unit tests for ao/whiten1D.}
\label{tab:ao_whiten1D}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/whiten2D} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the whiten2D method works with a vector of AOs as input.} & Test that the whiten2D method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'acv2'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the whiten2D method works with a matrix of AOs as input.} & Test that the whiten2D method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'atmat'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the whiten2D method works with a list of AOs as input.} & Test that the whiten2D method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the whiten2D method works with a mix of different shaped AOs as
input.} & Test that the whiten1D method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the whiten2D method properly applies history.} & Test that the result of applying the whiten2D method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'whiten2D'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the whiten2D method can modify the input AO.} & Test that the whiten2D method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Nothing to do. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the whiten2D method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the noisegen2D method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ao/whiten2D.}
\label{tab:ao_whiten2D}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/x} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the x method works with a vector of AOs as input.} & The x method doesn't work with a vector of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the x method works with a matrix of AOs as input.} & The x method doesn't work with a matrix of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the x method works with a list of AOs as input.} & The x method doesn't work with a list of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the x method works with a mix of different shaped AOs as
input.} & The x method can only return the x values of one AO. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the x method properly applies history.} & The x method doesn't change the AO, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the x method works for AOs with different data objects.} & Test that the x method returns the x values for AOs with cdata, fsdata,
tsdata and xydata objects. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the x method returns the x values of the data object} & Test that the x method returns the x values in a column vector independent
form the shape of the values in the data object. & pass \\ \cline{3-4}
        &    & 1) Check that 'x1' and 'x2' are column vectors. & pass \\ \hline
\caption{Unit tests for ao/x.}
\label{tab:ao_x}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/xcorr} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the xcorr method works with a vector with 2 AOs as input.} & Test that the xcorr method works for a vector with 2 AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the numbers of outputs is 1
2) Check that the output AO contains the correct data.
3) Check that the units are properly handled & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the xcorr method does not work with a matrix of AOs as input.} & Tests that the xcorr method does not work with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the xcorr method works with a list of 2 AOs as input.} & Tests that the xcorr method works with a list of 2 AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the numbers of outputs is 1
2) Check that the output AO contains the correct data.
3) Check that the units are properly handled & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the xcorr method does not work with a mix of different shaped AOs
as input.} & Tests that the xcorr method does not work with a mix of different shaped AOs
as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the xcorr method properly applies history.} & Test that the result of applying the xcorr method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'xcorr'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the xcorr method keeps the data shape of the input object.
In this case the first AO defines the data shape. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Check that the xcorr method pass back the output objects to a list of
output variables or to a single variable.
Does not make sense anymore, given the structure double input -> single output} & Call the method with a list of output variables and with a single output
variable.
Additionaly check that the rebuild method works on the output.
Additionaly check that the units are handled properly.
Additionaly check that the symmetry is preserved. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'.
3) Check that the units are handled properly.
4) Check that the symmetry is preserved. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the xcorr method re-sample all input AOs to the highest
frequency.} & Check that the xcorr method re-sample all input AOs to the highest
frequency. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the first AO is resampled to '200'
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the xcorr method truncate all input AOs to the same length.} & Check that the xcorr method truncate all input AOs to the same length. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the second AO is truncated to 10 seconds
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/xcorr] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the xcorr uses different lag ranges [-maxlags:maxlags]
Check that the xcorr accepts different scales options
Check that the xcorr handles units properly} & 1) Check that the xcorr uses different lag ranges [-maxlags:maxlags]
2) Check that the xcorr accepts different scales options & pass \\ \cline{3-4}
        &    & 1) Check that the output have the range [-maxlags:maxlags]
2) Check that the output have correct units & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the xcorr uses different lag ranges [-maxlags:maxlags]} & Check that the xcorr uses different lag ranges [-maxlags:maxlags] & pass \\ \cline{3-4}
        &    & 1) Check that the output have the range [-maxlags:maxlags] & pass \\ \hline
\caption{Unit tests for ao/xcorr.}
\label{tab:ao_xcorr}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/xunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the xunits method works with a vector of AOs as input.} & Tests that the xunits method works with a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output unit object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the xunits method works with a matrix of AOs as input.} & Tests that the xunits method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output unit object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the xunits method works with a list of AOs as input.} & Tests that the xunits method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output unit object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the xunits method works with a mix of different shaped AOs as
input.} & Tests that the xunits method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output unit object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the xunits method properly applies history.} & The xunits method doesn't change the AO, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the xunits method works for AOs with different data objects.} & Test that the xunits method returns the xunits values for AOs with fsdata,
tsdata and xydata objects, and empty units for AOs with cdata. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for ao/xunits.}
\label{tab:ao_xunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/y} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the y method works with a vector of AOs as input.} & The y method doesn't work with a vector of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the y method works with a matrix of AOs as input.} & The y method doesn't work with a matrix of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the y method works with a list of AOs as input.} & The y method doesn't work with a list of AOs. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the y method works with a mix of different shaped AOs as
input.} & The y method can only return the y values of one AO. Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the y method properly applies history.} & The y method doesn't change the AO, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the y method works for AOs with different data objects.} & Test that the y method returns the y values for AOs with cdata, fsdata,
tsdata and xydata objects. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the y method returns the y values of the data object} & Test that the y method returns the y values in a column vector independent
form the shape of the values in the data object. & pass \\ \cline{3-4}
        &    & 1) Check that 'y1' and 'y2' are column vectors. & pass \\ \hline
\caption{Unit tests for ao/y.}
\label{tab:ao_y}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/yunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the yunits method works with a vector of AOs as input.} & Tests that the yunits method works with a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output unit object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the yunits method works with a matrix of AOs as input.} & Tests that the yunits method works with a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output unit object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the yunits method works with a list of AOs as input.} & Tests that the yunits method works with a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output unit object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the yunits method works with a mix of different shaped AOs as
input.} & Tests that the yunits method works with a mix of different shaped AOs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input.
2) Check that each output unit object contains the correct values. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the yunits method properly applies history.} & The yunits method doesn't change the AO, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the yunits method works for AOs with different data objects.} & Test that the yunits method returns the yunits values for AOs with cdata,
fsdata, tsdata and xydata objects. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for ao/yunits.}
\label{tab:ao_yunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/zDomainFit} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the zDomainFit method works with a vector of AOs as input.} & Test that the zDomainFit method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'av'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the zDomainFit method works with a matrix of AOs as input.} & Test that the zDomainFit method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'am'
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the zDomainFit method works with a list of AOs as input.} & Test that the zDomainFit method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the zDomainFit method works with a mix of different shaped AOs as
input.} & Test that the zDomainFit method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the zDomainFit method properly applies history.} & Test that the result of applying the zDomainFit method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'zDomainFit'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{zDomainFit cannot modify the input AO.} & Test that the sDomainFit method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Nothing to do. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the zDomainFit method pass back the output objects to a
single variable correctly.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the zDomainFit method return the correct coefficients} & Test that the zDomainFit method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that output contains the correct coefficients. & pass \\ \hline
\caption{Unit tests for ao/zDomainFit.}
\label{tab:ao_zDomainFit}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ao/zeropad} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the zeropad method works with a vector of AOs as input.} & Test that the zeropad method works for a vector of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the zeropad method works with a matrix of AOs as input.} & Test that the zeropad method works for a matrix of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the zeropad method works with a list of AOs as input.} & Test that the zeropad method works for a list of AOs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the square of the
number in the input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the zeropad method works with a mix of different shaped AOs as
input.} & Test that the zeropad method works with an input of matrices and vectors
and single AOs. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output AO contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the zeropad method properly applies history.} & Test that the result of applying the zeropad method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'zeropad'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the zeropad method can modify the input AO.} & Test that the zeropad method can modify the input AO by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'at1' and 'ain' are now different.
2) Check that 'ain' is zeropad(at1). & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Check the data shape of the output against the input.} & Test that the zeropad method keeps the data shape of the input object. The
input AO must be an AO with row data and an AO with column data. & pass \\ \cline{3-4}
        &    & 1) Check that the shpe of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the zeropad method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [ao/zeropad] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for ao/zeropad.}
\label{tab:ao_zeropad}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf collection/collection} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [collection/collection] method works with a vector of objects as input.} & Test that the [collection/collection] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [collection/collection] method works with a matrix of objects as input.} & Test that the [collection/collection] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [collection/collection] method works with a list of objects as input.} & Test that the [collection/collection] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [collection/collection] method works with a mix of different arrays of objects as input.} & Tests that the [collection/collection] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [collection/collection] method properly applies history.} & Test that the result of applying the [collection/collection] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[collection/collection]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the collection method properly applies history to the
constructor with different numbers of inputs.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'collection'.
2) Check that the rebuilt objects are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests the collection constructor with different inputs.} & Tests the collection constructor with different inputs. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'collection'.
2) Check that the rebuilt objects are the same & pass \\ \hline
 \multirow{2}{3cm}{60 } & \multirow{2}{5cm}{Tests that the constructor method doesn't apply history to the read
MAT-file constructor.} & Tests that the constructor method doesn't apply history to the read
MAT-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{61 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the read
XML-file constructor.} & Tests that the constructor properly applies history to the read
XML-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{62 } & \multirow{2}{5cm}{Tests that the constructor properly applies history in the struct constructor.} & Tests that the constructor properly applies history in the struct constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{64 } & \multirow{2}{5cm}{Tests that the contructor properly applies history to the
plist(filename) constructor.} & Tests that the contructor properly applies history to the
plist(filename) constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{65 } & \multirow{2}{5cm}{Tests that the contructed object can be submitted and retrieved.} & Tests that the contructed object can be submitted and retrieved. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{68 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the conn+Id constructor.} & Tests that the constructor properly applies history to the conn+Id
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{70 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the
plist(<plist-object>) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for collection/collection.}
\label{tab:collection_collection}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf collection/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for collection/copy.}
\label{tab:collection_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf collection/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for collection/loadobj.}
\label{tab:collection_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf filterbank/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for filterbank/copy.}
\label{tab:filterbank_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf filterbank/filterbank} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [filterbank/filterbank] method works with a vector of objects as input.} & Test that the [filterbank/filterbank] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [filterbank/filterbank] method works with a matrix of objects as input.} & Test that the [filterbank/filterbank] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [filterbank/filterbank] method works with a list of objects as input.} & Test that the [filterbank/filterbank] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [filterbank/filterbank] method works with a mix of different arrays of objects as input.} & Tests that the [filterbank/filterbank] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [filterbank/filterbank] method properly applies history.} & Test that the result of applying the [filterbank/filterbank] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[filterbank/filterbank]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{60 } & \multirow{2}{5cm}{Tests that the constructor method doesn't apply history to the read
MAT-file constructor.} & Tests that the constructor method doesn't apply history to the read
MAT-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{61 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the read
XML-file constructor.} & Tests that the constructor properly applies history to the read
XML-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{62 } & \multirow{2}{5cm}{Tests that the constructor properly applies history in the struct constructor.} & Tests that the constructor properly applies history in the struct constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{64 } & \multirow{2}{5cm}{Tests that the contructor properly applies history to the
plist(filename) constructor.} & Tests that the contructor properly applies history to the
plist(filename) constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{65 } & \multirow{2}{5cm}{Tests that the contructed object can be submitted and retrieved.} & Tests that the contructed object can be submitted and retrieved. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{68 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the conn+Id constructor.} & Tests that the constructor properly applies history to the conn+Id
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for filterbank/filterbank.}
\label{tab:filterbank_filterbank}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf filterbank/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for filterbank/loadobj.}
\label{tab:filterbank_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of MATRIX objects as input.} & Test that the char method works for a vector of MATRIX objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least the character set
(char-method) of all inner object & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of MATRIX objects as input.} & Test that the char method works for a matrix of MATRIX objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least the character set
(char-method) of all inner object & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of MATRIX objects as input.} & Test that the char method works for a list of MATRIX objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least the character set
(char-method) of all inner object & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped MATRIX
objects as input.} & Test that the char method works with an input of matrices and vectors
and single MATRIX objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least the character set
(char-method) of all inner object & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the char method properly applies history.} & The method char doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for matrix/char.}
\label{tab:matrix_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for matrix/copy.}
\label{tab:matrix_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/ctranspose} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ctranspose method works with a vector of MATRICES as input.} & Test that the ctranspose method works for a vector of MATRICES as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mav'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ctranspose method works with a matrix of MATRICES as input.} & Test that the ctranspose method works for a matrix of MATRICES as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mam'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ctranspose method works with a list of MATRICES as input.} & Test that the ctranspose method works for a list of MATRICES as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ctranspose method works with a mix of different shaped
MATRICES as input.} & Test that the ctranspose method works with an input of matrices and
vectors and single MATRICES. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ctranspose method properly applies history.} & Test that the result of applying the ctranspose method can be
processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ctranspose'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the ctranspose method can modify the input MATRIX.} & Test that the ctranspose method can modify the input MATRIX by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'obj\_eq' are now different.
2) Check that 'obj\_eq' is not changed
3) Check that the modified input is the ctranspose value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the ctranspose method accepts plist as an input.} & Tests that the ctranspose method accepts plist as an input. & pass \\ \cline{3-4}
        &    & 1) Check that the correct data
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [matrix/ctranspose] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for matrix/ctranspose.}
\label{tab:matrix_ctranspose}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of MATRIX objects as
input.} & Test that the display method works for a vector of MATRIX objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of MATRIX objects as
input.} & Test that the display method works for a matrix of MATRIX objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of MATRIX objects as
input.} & Test that the display method works for a list of MATRIX objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped
MATRIX objects as input.} & Test that the display method works with an input of matrices and
vectors and single MATRIX objects as. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the display method properly applies history.} & The method display doesn't change the data, thus it is not possible
to check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for matrix/display.}
\label{tab:matrix_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for matrix/loadobj.}
\label{tab:matrix_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/matrix} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [matrix/matrix] method works with a vector of objects as input.} & Test that the [matrix/matrix] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [matrix/matrix] method works with a matrix of objects as input.} & Test that the [matrix/matrix] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [matrix/matrix] method works with a list of objects as input.} & Test that the [matrix/matrix] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [matrix/matrix] method works with a mix of different arrays of objects as input.} & Tests that the [matrix/matrix] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [matrix/matrix] method properly applies history.} & Test that the result of applying the [matrix/matrix] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[matrix/matrix]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the matrix method properly applies history to the
constructor with different numbers of inputs.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'matrix'.
2) Check that the rebuilt objects are the same & pass \\ \hline
 \multirow{2}{3cm}{60 } & \multirow{2}{5cm}{Tests that the constructor method doesn't apply history to the read
MAT-file constructor.} & Tests that the constructor method doesn't apply history to the read
MAT-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{61 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the read
XML-file constructor.} & Tests that the constructor properly applies history to the read
XML-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{62 } & \multirow{2}{5cm}{Tests that the constructor properly applies history in the struct constructor.} & Tests that the constructor properly applies history in the struct constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{64 } & \multirow{2}{5cm}{Tests that the contructor properly applies history to the
plist(filename) constructor.} & Tests that the contructor properly applies history to the
plist(filename) constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{65 } & \multirow{2}{5cm}{Tests that the contructed object can be submitted and retrieved.} & Tests that the contructed object can be submitted and retrieved. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{68 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the conn+Id constructor.} & Tests that the constructor properly applies history to the conn+Id
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{70 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the
plist(<plist-object>) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for matrix/matrix.}
\label{tab:matrix_matrix}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/ncols} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ncols method works with a vector of MATRICES as input.} & The ncols method doesn't work with a vector of MATRICES.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ncols method works with a matrix of MATRICES as input.} & The ncols method doesn't work with a matrix of MATRICES.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ncols method works with a list of MATRICES as input.} & The ncols method doesn't work with a list of MATRICES.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ncols method works with a mix of different shaped
MATRICES as input.} & The ncols method can only return the ncols values of one MATRIX.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ncols method properly applies history.} & The ncols method doesn't change the MATRIX, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the ncols method returns the number of columns of the inner
objects.} & Tests that the ncols method returns the number of columns of the inner
objects. & pass \\ \cline{3-4}
        &    & 1) Check that n1 and n2 are correct. & pass \\ \hline
\caption{Unit tests for matrix/ncols.}
\label{tab:matrix_ncols}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/nrows} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the nrows method works with a vector of MATRICES as input.} & The nrows method doesn't work with a vector of MATRICES.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the nrows method works with a matrix of MATRICES as input.} & The nrows method doesn't work with a matrix of MATRICES.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the nrows method works with a list of MATRICES as input.} & The nrows method doesn't work with a list of MATRICES.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the nrows method works with a mix of different shaped
MATRICES as input.} & The nrows method can only return the nrows values of one MATRIX.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the nrows method properly applies history.} & The nrows method doesn't change the MATRIX, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the nrows method returns the number of columns of the inner
objects.} & Tests that the nrows method returns the number of columns of the inner
objects. & pass \\ \cline{3-4}
        &    & 1) Check that n1 and n2 are correct. & pass \\ \hline
\caption{Unit tests for matrix/nrows.}
\label{tab:matrix_nrows}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/osize} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the osize method works with a vector of MATRICES as input.} & The osize method doesn't work with a vector of MATRICES.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the osize method works with a matrix of MATRICES as input.} & The osize method doesn't work with a matrix of MATRICES.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the osize method works with a list of MATRICES as input.} & The osize method doesn't work with a list of MATRICES.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the osize method works with a mix of different shaped
MATRICES as input.} & The osize method can only return the osize values of one MATRIX.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the osize method properly applies history.} & The osize method doesn't change the MATRIX, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the osize method returns the number of columns of the inner
objects.} & Tests that the osize method returns the number of columns of the inner
objects. & pass \\ \cline{3-4}
        &    & 1) Check that n1 and n2 are correct. & pass \\ \hline
\caption{Unit tests for matrix/osize.}
\label{tab:matrix_osize}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/setObjs} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [matrix/setObjs] method works with a vector of objects as input.} & Test that the [matrix/setObjs] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [matrix/setObjs] method works with a matrix of objects as input.} & Test that the [matrix/setObjs] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [matrix/setObjs] method works with a list of objects as input.} & Test that the [matrix/setObjs] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [matrix/setObjs] method works with a mix of different arrays of objects as input.} & Tests that the [matrix/setObjs] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [matrix/setObjs] method properly applies history.} & Test that the result of applying the [matrix/setObjs] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[matrix/setObjs]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setObjs method can modify the input MATRIX.} & Test that the setObjs method can modify the input MATRIX by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'obj\_eq' are now different.
2) Check that 'obj\_eq' is not changed
3) Check that the modified input is the setObjs value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setObjs method can set the property without a plist.} & Test that the setObjs method can modify the property 'objs'
without a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'out' has the correct objs field
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setObjs method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [matrix/setObjs] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for matrix/setObjs.}
\label{tab:matrix_setObjs}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf matrix/transpose} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the transpose method works with a vector of MATRICES as input.} & Test that the transpose method works for a vector of MATRICES as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mav'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the transpose method works with a matrix of MATRICES as input.} & Test that the transpose method works for a matrix of MATRICES as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mam'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the transpose method works with a list of MATRICES as input.} & Test that the transpose method works for a list of MATRICES as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the transpose method works with a mix of different shaped
MATRICES as input.} & Test that the transpose method works with an input of matrices and
vectors and single MATRICES. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the transpose method properly applies history.} & Test that the result of applying the transpose method can be
processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'transpose'.
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the transpose method can modify the input MATRIX.} & Test that the transpose method can modify the input MATRIX by calling
with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'obj\_eq' are now different.
2) Check that 'obj\_eq' is not changed
3) Check that the modified input is the transpose value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the transpose method accepts plist as an input.} & Tests that the transpose method accepts plist as an input. & pass \\ \cline{3-4}
        &    & 1) Check that the correct data
2) Check that the re-built object is the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the [matrix/transpose] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the same plotinfo plist & pass \\ \hline
\caption{Unit tests for matrix/transpose.}
\label{tab:matrix_transpose}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of MFIR objects as input.} & Test that the char method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of MFIR objects as input.} & Test that the char method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of MFIR objects as input.} & Test that the char method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped MFIR objects
as input.} & Test that the char method works with an input of matrices and vectors
and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the char method properly applies history.} & The method char doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for mfir/char.}
\label{tab:mfir_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for mfir/copy.}
\label{tab:mfir_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/created} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the created method works with a vector of MFIR objects as
input.} & Test that the created method works for a vector of MFIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the created method works with a matrix of MFIR objects as
input.} & Test that the created method works for a matrix of MFIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the created method works with a list of MFIR objects as
input.} & Test that the created method works for a list of MFIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the created method works with a mix of different shaped
MFIR objects as input.} & Test that the created method works with an input of matrices and
vectors and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the created method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the created method can be used with the modify command.} & Tests that the created method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the created method retruns always a well defined time object
even for an empty input object.} & Test that the created method with an empty 'MFIR object & pass \\ \cline{3-4}
        &    & 1) Check that the output is a time object with a ell defined time. & pass \\ \hline
\caption{Unit tests for mfir/created.}
\label{tab:mfir_created}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/creator} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the creator method works with a vector of MFIR objects as
input.} & Test that the creator method works for a vector of MFIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the creator method works with a matrix of MFIR objects as
input.} & Test that the creator method works for a matrix of MFIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the creator method works with a list of MFIR objects as
input.} & The creator method doesn't work for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the creator method works with a mix of different shaped
MFIR objects as input.} & The creator method doesn't work with different shaped input objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the creator method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the creator method can be used with the modify command.} & Tests that the creator method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the creator method retruns all creator(s)/modifier(s) which
are in the history.} & Test that the creator method uses the option 'all' direct or in a
plist. The test file must have the modifier 'first', 'second' and
'third' & pass \\ \cline{3-4}
        &    & 1) Check that out1 contains only one creator
2) Check that out2 contain more creator/modifier & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests the negative case for the option 'all'.} & Test that the creator method throws an error if the option 'all' is
used in connection with a matrix/vector of MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for mfir/creator.}
\label{tab:mfir_creator}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of MFIR objects as input.} & Test that the display method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of MFIR objects as input.} & Test that the display method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of MFIR objects as input.} & Test that the display method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped
MFIR objects as input.} & Test that the display method works with an input of matrices and vectors
and single MFIR objects as. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the display method properly applies history.} & The method display doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for mfir/display.}
\label{tab:mfir_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/eq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eq method works with a vector of MFIR objects as input.} & Test that the eq method works for a vector of MFIR objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eq method works with a matrix of MFIR objects as input.} & Test that the eq method works for a matrix of MFIR objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eq method works with a list of MFIR objects as input.} & The eq method doesn't works for a list of MFIR objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eq method works with a mix of different shaped MFIR objects
as input.} & The eq method doesn't works for a list of MFIR objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the eq method properly applies history.} & The eq method doesn't change the MFIR object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because fir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'histout'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because fir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'iunits'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because fir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'ounits'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because fir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Test the eq method with an exception list which is in a plist.} & Test that the eq method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for mfir/eq.}
\label{tab:mfir_eq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/get} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the get method of the mfir class.} & Test that the get returns returns the value of the specified
property. Do this for all properties of the MFIR object. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the get method works with a plist.} & Test that the get returns returns the value of the specified
property which is defined in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests the get method of the mfir class.} & Test that the get throws an error if the input are more than
one MFIR object. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for mfir/get.}
\label{tab:mfir_get}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/index} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the index method works with a vector of MFIR objects as
input.} & Test that the index method works for a vector of MFIR objects as
input. The following indexing should work:
I = [ 1 2 3 ] or (I/J) = [(1,1), (1,2), (1,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the index method works with a matrix of MFIR objects as
input.} & Test that the index method works for a matrix of MFIR objects as
input. The following indexing should work:
I = [ 1 3 5 ] or (I/J) = [(1,1), (1,2), (1,3)]
[ 2 4 6 ]            [(2,1), (2,2), (2,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the index method works with a list of MFIR objects as
input.} & The index method doesn't work for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the index method properly applies history.} & Test that the result of index have an additional history step. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds
to 'index'. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the index method works for the modifier command.} & Tests that the index method works for the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the index method can be controled with a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the index method selects more objects if I have more indices.} & Test that the index method selects more objects if I have more indices. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
\caption{Unit tests for mfir/index.}
\label{tab:mfir_index}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/isprop} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isprop method works with a vector of MFIR objects as input.} & Test that the isprop method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isprop method works with a matrix of MFIR objects as input.} & Test that the isprop method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isprop method works with a list of MFIR objects as input.} & Test that the isprop method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isprop method works with a mix of different shaped
MFIR objects as input.} & Test that the isprop method works with an input of matrices and vectors
and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isprop method properly applies history.} & The method isprop doesn't change the object, thus it is not necessary to
apply history. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the isprop method works for each property.} & Test that the isprop method works for the properties:
'gd', 'ntaps', 'fs', 'infile', 'a', 'histout',
'iunits', 'ounits', 'hist', 'name' & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the negative case and the not function command.} & Test that the isprop method retrun false for a unknown property and for
methods of the object. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for mfir/isprop.}
\label{tab:mfir_isprop}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for mfir/loadobj.}
\label{tab:mfir_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/mfir} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the mfir method works with a vector of MFIR objects as input.} & Test that the mfir method works with a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output MFIRs is the same as the input shape.
2) Check that each output MFIR is a copy of the input MFIR.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the mfir method works with a matrix of MFIR objects as input.} & Test that the mfir method works with a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output MFIRs is the same as the input shape.
2) Check that each output MFIR is a copy of the input MFIR.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the mfir method works with a list of MFIR objects as input.} & Test that the mfir method works with a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output MFIR is a copy of the input MFIR.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the mfir method works with a mix of different shaped MFIRs as
input.} & Test that the mfir method works with a mix of different shaped MFIRs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output MFIR is a copy of the input MFIR.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history.} & Test that the result of applying the mfir method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the copy constructor.} & Test that the output can be processed back with the 'rebuild' method.
Test the constructor with a different number of inputs. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the original objects are not changed by the setter function
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the read
MAT-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the read
XML-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check the shape
2) Check that the last entry in the history of 'out'
corresponds to 'mfir'.
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the AO constructor.} & Test that the output can be processed back with the 'rebuild' method. Use
the default values (method = 'frequency-sampling'). & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the struct constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the pzmodel constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the
plist(filename) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the MFIR method properly applies history to the
plist(conn) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests that the MFIR method properly applies history to the
plist(type) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests that the MFIR method properly applies history to the
plist(pzmodel) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests that the MFIR method properly applies history to the
plist(<plist-object>) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests that the MFIR method properly applies history to the a constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the plist(AO) constructor.} & Test that the output can be processed back with the 'rebuild' method. Use
the method 'frequency-sampling'. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the plist(AO) constructor.} & Test that the output can be processed back with the 'rebuild' method. Use
the method 'least-squares'. & pass \\ \cline{3-4}
        &    & 1) At the moment throws this method an error. & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the plist(AO) constructor.} & Test that the output can be processed back with the 'rebuild' method. Use
the method 'Parks-McClellan'. & pass \\ \cline{3-4}
        &    & 1) At the moment throws this method an error. & pass \\ \hline
 \multirow{2}{3cm}{22 } & \multirow{2}{5cm}{Tests that the mfir method properly applies history to the AO + plist constructor.} & Test that the output can be processed back with the 'rebuild' method. Use
the method 'frequency-sampling'. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{23 } & \multirow{2}{5cm}{Tests that the MFIR method properly applies history to the conn+Id constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that re-running the 'test.m' file produces the same object
as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{24 } & \multirow{2}{5cm}{Tests that the MFIR method properly applies history to the
pole/zero model + plist object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{25 } & \multirow{2}{5cm}{Tests that the MFIR method properly applies history to the
a + fs object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mfir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for mfir/mfir.}
\label{tab:mfir_mfir}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/ne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ne method works with a vector of MFIR objects as input.} & Test that the ne method works for a vector of MFIR objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ne method works with a matrix of MFIR objects as input.} & Test that the ne method works for a matrix of MFIR objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ne method works with a list of MFIR objects as input.} & The ne method doesn't works for a list of MFIR objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ne method works with a mix of different shaped MFIR objects
as input.} & The ne method doesn't works for a list of MFIR objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ne method properly applies history.} & The ne method doesn't change the MFIR object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the ne method with an exception list.
The function mfir/ne use the function mfir/eq so it is not necessary to check
all possibilities of the exception list.} & Test the ne method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because fir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the ne method with an exception list which is in a plist.} & Test that the ne method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for mfir/ne.}
\label{tab:mfir_ne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/rebuild} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rebuild method works with a vector of MFIR objects as input.} & Test that the rebuild method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rebuild method works with a matrix of MFIR objects as input.} & Test that the rebuild method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rebuild method works with a list of MFIR objects as input.} & Test that the rebuild method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rebuild method works with a mix of different shaped MFIR objects
as input.} & Test that the rebuild method works with an input of matrices and vectors
and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rebuild method properly applies history.} & The method rebuild doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the rebuild method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for mfir/rebuild.}
\label{tab:mfir_rebuild}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/redesign} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the redesign method works with a vector of MFIR objects as input.} & Test that the redesign method works for a vector of MFIR objects as input.
To keep this UTP simple use for the vector only one filter object. The
different filters will be tested in an other UTP. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firvec'
2) Check that each output MFIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the redesign method works with a matrix of MFIR objects as input.} & Test that the redesign method works for a matrix of MFIR objects as input.
To keep this UTP simple use for the matrix only one filter object. The
different filters will be tested in an other UTP. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firmat'
2) Check that each output MFIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the redesign method works with a list of MFIR objects as input.} & Test that the redesign method works for a list of MFIR objects as input.
To keep this UTP simple use for the list only one filter object. The
different filters will be tested in an other UTP. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output MFIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the redesign method works with a mix of different shaped
MFIR objects as input.} & Test that the redesign method works with an input of matrices and vectors
and single MFIR objects.
To keep this UTP simple use for the vector only one filter object. The
different filters will be tested in an other UTP. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output MFIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the redesign method properly applies history.} & Test that the result of applying the redesign method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'redesign'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the redesign method redesigns a standard filter type.} & Tests that the redesign method redesigns a standard filter type. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check the rebuilt object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the redesign method redesigns a pzmodel filter type.} & Tests that the redesign method redesigns a pzmodel filter type. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check the rebuilt object & pass \\ \hline
\caption{Unit tests for mfir/redesign.}
\label{tab:mfir_redesign}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/resp} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the resp method works with a vector of MFIR objects as input.} & Test that the resp method works for a vector of MFIR objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'firv'
3) Check that each output MFIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the resp method works with a matrix of MFIR objects as input.} & Test that the resp method works for a matrix of MFIR objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'firmat'
3) Check that each output MFIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the resp method works with a list of MFIR objects as input.} & Test that the resp method works for a list of MFIR objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'firmat'
3) Check that each output MFIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the resp method works with a mix of different shaped MFIR
objects as input.} & Test that the resp method works with an input of matrices and vectors
and single MFIR objects. Test the method with an output and with no
output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'firmat'
3) Check that each output MFIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the resp method properly applies history.} & Test that the result of applying the resp method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'resp'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that modify command plots the response into a diagram.} & Tests that modify command plots the response into a diagram. & pass \\ \cline{3-4}
        &    & 1) Check the response diagram. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the output AO of the resp method keeps the shape of the used
input f vector. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the resp method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the resp method uses the x-data of an input AO for f-vector.} & Call the method with different method to pass an AO in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the resp method uses the specified f-vector to compute the response.} & Call the method with different method to pass an f-vector in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Check that the resp method the response of a serial filter bank.} & Check that the resp method the response of a serial filter bank. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Check that the resp method the response of a parallel filter bank.} & Check that the resp method the response of a parallel filter bank. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for mfir/resp.}
\label{tab:mfir_resp}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/save} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the save method works with a vector of MFIR objects as input.} & Test that the save method works for a vector of MFIR objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'firv'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the save method works with a matrix of MFIR objects as input.} & Test that the save method works for a matrix of MFIR objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'firm'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the save method works with a list of MFIR objects as input.} & Test that the save method works for a list of MFIR objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in the list
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the save method works with a mix of different shaped MFIR objects
as input.} & Test that the save method works with an input of matrices and vectors
and single MFIR objects. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output MFIR object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the save method properly applies history.} & Test that the result of applying the save method can be processed back
to an m-file. Do this for both extensions 'mat' and 'xml' & pass \\ \cline{3-4}
        &    & 1) Check that the history applies to the output object. Check that
save doesn't add a history step to the input object.
2) Check that the read object doesn't contain the save + load history steps.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the save method works with the modify command.} & Use the save method with the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the save method applies the history.
2) Check the output against the input. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the save method uses the filename which is stored in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the save method with standard MFIR objects.} & Save all standard MFIR objects with both extensions. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the save method with MFIR object which is created from a pole/zero model} & Save MFIR object which is created from a pzmodel. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Test the save method with MFIR object which is created from an analysis
model.} & Save MFIR object which is created from an analysis model. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for mfir/save.}
\label{tab:mfir_save}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/setHistout} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setHistout method works with a vector of MFIR objects as input.} & The setHistout should set the output history (histout) of each input. & pass \\ \cline{3-4}
        &    & 1) Check the histout has the correct values & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setHistout method works with a matrix of MFIR objects as input.} & The setHistout should set the output history (histout) of each input. & pass \\ \cline{3-4}
        &    & 1) Check the histout has the correct values & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setHistout method works with a list of MFIR objects as input.} & The setHistout should set the output history (histout) of each input. & pass \\ \cline{3-4}
        &    & 1) Check the histout has the correct values & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setHistout method works with a mix of different shaped MFIR
objects as input.} & The setHistout method is not designed for this call, for that reason must
this call fail. & pass \\ \cline{3-4}
        &    & 1) Check the histout has the correct values & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setHistout method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setHistout method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setHistout'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setHistout'.
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setHistout method can modify the input MFIR object.} & Test that the setHistout method can modify the input MFIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'firhp' and 'ain' are now different.
2) Check that 'ain' has the correct histout field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setHistout method can set the property with a plist.} & Test that the setHistout method can modify the property 'histout'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct histout field
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for mfir/setHistout.}
\label{tab:mfir_setHistout}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/setIunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setIunits method works with a vector of MFIR objects as input.} & Test that the setIunits method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setIunits method works with a matrix of MFIR objects as input.} & Test that the setIunits method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setIunits method works with a list of MFIR objects as input.} & Test that the setIunits method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setIunits method works with a mix of different shaped MFIR
objects as input.} & Test that the setIunits method works with an input of matrices and vectors
and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setIunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setIunits method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setIunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setIunits'.
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setIunits method can modify the input MFIR object.} & Test that the setIunits method can modify the input MFIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'firhp' and 'ain' are now different.
2) Check that 'ain' has the correct iunits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setIunits method can set the property with a plist.} & Test that the setIunits method can modify the property 'iunits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct iunits field
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setIunits method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for mfir/setIunits.}
\label{tab:mfir_setIunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/setName} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setName method works with a vector of MFIR objects as input.} & Test that the setName method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setName method works with a matrix of MFIR objects as input.} & Test that the setName method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setName method works with a list of MFIR objects as input.} & Test that the setName method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setName method works with a mix of different shaped MFIR
objects as input.} & Test that the setName method works with an input of matrices and vectors
and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setName method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setName method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setName'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setName'.
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setName method can modify the input MFIR object.} & Test that the setName method can modify the input MFIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'firhp' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setName method can set the property with a plist.} & Test that the setName method can modify the property 'name'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setName method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for mfir/setName.}
\label{tab:mfir_setName}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/setOunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setOunits method works with a vector of MFIR objects as input.} & Test that the setOunits method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setOunits method works with a matrix of MFIR objects as input.} & Test that the setOunits method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'firm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setOunits method works with a list of MFIR objects as input.} & Test that the setOunits method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setOunits method works with a mix of different shaped MFIR
objects as input.} & Test that the setOunits method works with an input of matrices and vectors
and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setOunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setOunits method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setOunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setOunits'.
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setOunits method can modify the input MFIR object.} & Test that the setOunits method can modify the input MFIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'firhp' and 'ain' are now different.
2) Check that 'ain' has the correct ounits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setOunits method can set the property with a plist.} & Test that the setOunits method can modify the property 'ounits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct ounits field
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setOunits method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for mfir/setOunits.}
\label{tab:mfir_setOunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the string method works with a vector of MFIR objects as input.} & Test that the string method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the string method works with a matrix of MFIR objects as input.} & Test that the string method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the string method works with a list of MFIR objects as input.} & Test that the string method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the string method works with a mix of different shaped MFIR objects
as input.} & Test that the string method works with an input of matrices and vectors
and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the string method properly applies history.} & The method string doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the string method doesn't work if the MFIR object have more
than one history step.} & The method string throws an error because the input object have more than
one history step. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for mfir/string.}
\label{tab:mfir_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf mfir/type} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the type method works with a vector of MFIR objects as input.} & Test that the type method works for a vector of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the type method works with a matrix of MFIR objects as input.} & Test that the type method works for a matrix of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the type method works with a list of MFIR objects as input.} & Test that the type method works for a list of MFIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the type method works with a mix of different shaped MFIR objects
as input.} & Test that the type method works with an input of matrices and vectors
and single MFIR objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the type method properly applies history.} & The method type doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for mfir/type.}
\label{tab:mfir_type}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of MIIR objects as input.} & Test that the char method works for a vector of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of MIIR objects as input.} & Test that the char method works for a matrix of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of MIIR objects as input.} & Test that the char method works for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped MIIR objects
as input.} & Test that the char method works with an input of matrices and vectors
and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the char method properly applies history.} & The method char doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for miir/char.}
\label{tab:miir_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for miir/copy.}
\label{tab:miir_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/created} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the created method works with a vector of MIIR objects as
input.} & Test that the created method works for a vector of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the created method works with a matrix of MIIR objects as
input.} & Test that the created method works for a matrix of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the created method works with a list of MIIR objects as
input.} & Test that the created method works for a list of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the created method works with a mix of different shaped
MIIR objects as input.} & Test that the created method works with an input of matrices and
vectors and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the created method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the created method can be used with the modify command.} & Tests that the created method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the created method retruns always a well defined time object
even for an empty input object.} & Test that the created method with an empty 'MIIR object & pass \\ \cline{3-4}
        &    & 1) Check that the output is a time object with a ell defined time. & pass \\ \hline
\caption{Unit tests for miir/created.}
\label{tab:miir_created}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/creator} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the creator method works with a vector of MIIR objects as
input.} & Test that the creator method works for a vector of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the creator method works with a matrix of MIIR objects as
input.} & Test that the creator method works for a matrix of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the creator method works with a list of MIIR objects as
input.} & The creator method doesn't work for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the creator method works with a mix of different shaped
MIIR objects as input.} & The creator method doesn't work with different shaped input objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the creator method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the creator method can be used with the modify command.} & Tests that the creator method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the creator method retruns all creator(s)/modifier(s) which
are in the history.} & Test that the creator method uses the option 'all' direct or in a
plist. The test file must have the modifier 'first', 'second' and
'third' & pass \\ \cline{3-4}
        &    & 1) Check that out1 contains only one creator
2) Check that out2 contain more creator/modifier & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests the negative case for the option 'all'.} & Test that the creator method throws an error if the option 'all' is
used in connection with a matrix/vector of MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for miir/creator.}
\label{tab:miir_creator}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of MIIR objects as
input.} & Test that the display method works for a vector of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of MIIR objects as
input.} & Test that the display method works for a matrix of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of MIIR objects as
input.} & Test that the display method works for a list of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped
MIIR objects as input.} & Test that the display method works with an input of matrices and
vectors and single MIIR objects as. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the display method properly applies history.} & The method display doesn't change the data, thus it is not possible
to check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for miir/display.}
\label{tab:miir_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/eq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eq method works with a vector of MIIR objects as input.} & Test that the eq method works for a vector of MIIR objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eq method works with a matrix of MIIR objects as input.} & Test that the eq method works for a matrix of MIIR objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eq method works with a list of MIIR objects as input.} & The eq method doesn't works for a list of MIIR objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eq method works with a mix of different shaped MIIR objects
as input.} & The eq method doesn't works for a list of MIIR objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the eq method properly applies history.} & The eq method doesn't change the MIIR object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because iir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'histin'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because iir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'histout'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because iir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'iunits'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because iir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'ounits'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because iir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Test the eq method with an exception list which is in a plist.} & Test that the eq method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for miir/eq.}
\label{tab:miir_eq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/get} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the get method of the miir class.} & Test that the get returns returns the value of the specified
property. Do this for all properties of the MIIR object. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the get method works with a plist.} & Test that the get returns returns the value of the specified
property which is defined in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests the get method of the miir class.} & Test that the get throws an error if the input are more than
one MIIR object. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for miir/get.}
\label{tab:miir_get}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/index} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the index method works with a vector of MIIR objects as
input.} & Test that the index method works for a vector of MIIR objects as
input. The following indexing should work:
I = [ 1 2 3 ] or (I/J) = [(1,1), (1,2), (1,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the index method works with a matrix of MIIR objects as
input.} & Test that the index method works for a matrix of MIIR objects as
input. The following indexing should work:
I = [ 1 3 5 ] or (I/J) = [(1,1), (1,2), (1,3)]
[ 2 4 6 ]            [(2,1), (2,2), (2,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the index method works with a list of MIIR objects as
input.} & The index method doesn't work for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the index method properly applies history.} & Test that the result of index have an additional history step. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds
to 'index'. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the index method works for the modifier command.} & Tests that the index method works for the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the index method can be controled with a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the index method selects more objects if I have more indices.} & Test that the index method selects more objects if I have more indices. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
\caption{Unit tests for miir/index.}
\label{tab:miir_index}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/isprop} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isprop method works with a vector of MIIR objects as
input.} & Test that the isprop method works for a vector of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isprop method works with a matrix of MIIR objects as
input.} & Test that the isprop method works for a matrix of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isprop method works with a list of MIIR objects as
input.} & Test that the isprop method works for a list of MIIR objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isprop method works with a mix of different shaped
MIIR objects as input.} & Test that the isprop method works with an input of matrices and
vectors and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isprop method properly applies history.} & The method isprop doesn't change the object, thus it is not necessary
to apply history. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the isprop method works for each property.} & Test that the isprop method works for the properties:
'b', 'histin', 'ntaps', 'fs', 'infile', 'a', 'histout',
'iunits', 'ounits', 'hist', 'name' & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the negative case and the not function command.} & Test that the isprop method retrun false for a unknown property and for
methods of the object. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for miir/isprop.}
\label{tab:miir_isprop}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for miir/loadobj.}
\label{tab:miir_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/miir} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the miir method works with a vector of MIIR objects as input.} & Test that the miir method works with a vector of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output MIIRs is the same as the input shape.
2) Check that each output MIIR is a copy of the input MIIR.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the miir method works with a matrix of MIIR objects as input.} & Test that the miir method works with a matrix of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output MIIRs is the same as the input shape.
2) Check that each output MIIR is a copy of the input MIIR.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the miir method works with a list of MIIR objects as input.} & Test that the miir method works with a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output MIIR is a copy of the input MIIR.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the miir method works with a mix of different shaped MIIRs as
input.} & Test that the miir method works with a mix of different shaped MIIRs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output MIIR is a copy of the input MIIR.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the miir method properly applies history.} & Test that the result of applying the miir method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the miir method properly applies history to the copy constructor.} & Test that the output can be processed back with the 'rebuild' method.
Test the constructor with a different number of inputs. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the original objects are not changed by the setter function
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the miir method properly applies history to the read
MAT-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the miir method properly applies history to the read
XML-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the miir method properly applies history to the read
FIL-file constructor.} & Read the FIL file which is created from LISO.
Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Tests that the miir method properly applies history to the struct constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the miir method properly applies history to the parfrac constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'miir'.
2) Check the correct number of outputs.
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the miir method properly applies history to the pzmodel constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the miir method properly applies history to the
plist(filename) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the
plist(conn) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the
plist(type) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the
plist(pzmodel) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the
plist(parfrac) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the
plist(<plist-object>) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the a,b constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the
pole/zero model + plist object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{22 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the
partial fraction model + plist object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{23 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the conn+Id constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{24 } & \multirow{2}{5cm}{Tests that the MIIR method properly applies history to the
a + b + fs object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'miir'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for miir/miir.}
\label{tab:miir_miir}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/ne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ne method works with a vector of MIIR objects as input.} & Test that the ne method works for a vector of MIIR objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ne method works with a matrix of MIIR objects as input.} & Test that the ne method works for a matrix of MIIR objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ne method works with a list of MIIR objects as input.} & The ne method doesn't works for a list of MIIR objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ne method works with a mix of different shaped MIIR objects
as input.} & The ne method doesn't works for a list of MIIR objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ne method properly applies history.} & The ne method doesn't change the MIIR object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the ne method with an exception list.
The function miir/ne use the function miir/eq so it is not necessary to check
all possibilities of the exception list.} & Test the ne method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because iir is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the ne method with an exception list which is in a plist.} & Test that the ne method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for miir/ne.}
\label{tab:miir_ne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/rebuild} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rebuild method works with a vector of MIIR objects as input.} & Test that the rebuild method works for a vector of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rebuild method works with a matrix of MIIR objects as input.} & Test that the rebuild method works for a matrix of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rebuild method works with a list of MIIR objects as input.} & Test that the rebuild method works for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rebuild method works with a mix of different shaped MIIR objects
as input.} & Test that the rebuild method works with an input of matrices and vectors
and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rebuild method properly applies history.} & The method rebuild doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the rebuild method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for miir/rebuild.}
\label{tab:miir_rebuild}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/redesign} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the redesign method works with a vector of MIIR objects as input.} & Test that the redesign method works for a vector of MIIR objects as input.
To keep this UTP simple use for the vector only one filter object. The
different filters will be tested in an other UTP. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirvec'
2) Check that each output MIIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the redesign method works with a matrix of MIIR objects as input.} & Test that the redesign method works for a matrix of MIIR objects as input.
To keep this UTP simple use for the matrix only one filter object. The
different filters will be tested in an other UTP. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirmat'
2) Check that each output MIIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the redesign method works with a list of MIIR objects as input.} & Test that the redesign method works for a list of MIIR objects as input.
To keep this UTP simple use for the list only one filter object. The
different filters will be tested in an other UTP. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output MIIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the redesign method works with a mix of different shaped
MIIR objects as input.} & Test that the redesign method works with an input of matrices and vectors
and single MIIR objects.
To keep this UTP simple use for the vector only one filter object. The
different filters will be tested in an other UTP. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output MIIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the redesign method properly applies history.} & Test that the result of applying the redesign method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'redesign'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the redesign method redesigns a standard filter type.} & Tests that the redesign method redesigns a standard filter type. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check the rebuilt object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the redesign method redesigns a pzmodel filter type.} & Tests that the redesign method redesigns a pzmodel filter type. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check the rebuilt object & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the redesign method redesigns a parfrac filter type.} & Tests that the redesign method redesigns a parfrac filter type. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check the rebuilt object & pass \\ \hline
\caption{Unit tests for miir/redesign.}
\label{tab:miir_redesign}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/resp} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the resp method works with a vector of MIIR objects as input.} & Test that the resp method works for a vector of MIIR objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'iirv'
3) Check that each output MIIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the resp method works with a matrix of MIIR objects as input.} & Test that the resp method works for a matrix of MIIR objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'iirmat'
3) Check that each output MIIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the resp method works with a list of MIIR objects as input.} & Test that the resp method works for a list of MIIR objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'iirmat'
3) Check that each output MIIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the resp method works with a mix of different shaped MIIR
objects as input.} & Test that the resp method works with an input of matrices and vectors
and single MIIR objects. Test the method with an output and with no
output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'iirmat'
3) Check that each output MIIR contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the resp method properly applies history.} & Test that the result of applying the resp method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'resp'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that modify command plots the response into a diagram.} & Tests that modify command plots the response into a diagram. & pass \\ \cline{3-4}
        &    & 1) Check the response diagram. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the output AO of the resp method keeps the shape of the used
input f vector. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the resp method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the resp method uses the x-data of an input AO for f-vector.} & Call the method with different method to pass an AO in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the resp method uses the specified f-vector to compute the response.} & Call the method with different method to pass an f-vector in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Check that the resp method the response of a serial filter bank.} & Check that the resp method the response of a serial filter bank. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Check that the resp method the response of a parallel filter bank.} & Check that the resp method the response of a parallel filter bank. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for miir/resp.}
\label{tab:miir_resp}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/save} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the save method works with a vector of MIIR objects as input.} & Test that the save method works for a vector of MIIR objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'iirv'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the save method works with a matrix of MIIR objects as input.} & Test that the save method works for a matrix of MIIR objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'iirm'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the save method works with a list of MIIR objects as input.} & Test that the save method works for a list of MIIR objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in the list
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the save method works with a mix of different shaped MIIR objects
as input.} & Test that the save method works with an input of matrices and vectors
and single MIIR objects. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output MIIR object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the save method properly applies history.} & Test that the result of applying the save method can be processed back
to an m-file. Do this for both extensions 'mat' and 'xml' & pass \\ \cline{3-4}
        &    & 1) Check that the history applies to the output object. Check that
save doesn't add a history step to the input object.
2) Check that the read object doesn't contain the save + load history steps.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the save method works with the modify command.} & Use the save method with the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't apply the history.
2) Check the output against the input. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the save method uses the filename which is stored in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the save method with standard MIIR objects.} & Save all standard MIIR objects with both extensions. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the save method with MIIR object which is created from a pole/zero model} & Save MIIR object which is created from a pzmodel. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for miir/save.}
\label{tab:miir_save}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/setHistin} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setHistin method works with a vector of MIIR objects as input.} & The setHistin method is not designed for vectors, for that reason must
this call fail. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setHistin method works with a matrix of MIIR objects as input.} & The setHistin method is not designed for matrices, for that reason must
this call fail. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setHistin method works with a list of MIIR objects as input.} & The setHistin method is not designed for input lists, for that reason must
this call fail. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setHistin method works with a mix of different shaped MIIR
objects as input.} & The setHistin method is not designed for this call, for that reason must
this call fail. & pass \\ \cline{3-4}
        &    & 1) Nothing to check & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setHistin method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setHistin method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setHistin'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setHistin'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setHistin method can modify the input MIIR object.} & Test that the setHistin method can modify the input MIIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'iirhp' and 'ain' are now different.
2) Check that 'ain' has the correct histin field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setHistin method can set the property with a plist.} & Test that the setHistin method can modify the property 'histin'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct histin field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for miir/setHistin.}
\label{tab:miir_setHistin}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/setHistout} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setHistout method works with a vector of MIIR objects as input.} & The setHistout should set the output history (histout) of each input. & pass \\ \cline{3-4}
        &    & 1) Check the histout has the correct values & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setHistout method works with a matrix of MIIR objects as input.} & The setHistout should set the output history (histout) of each input. & pass \\ \cline{3-4}
        &    & 1) Check the histout has the correct values & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setHistout method works with a list of MIIR objects as input.} & The setHistout should set the output history (histout) of each input. & pass \\ \cline{3-4}
        &    & 1) Check the histout has the correct values & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setHistout method works with a mix of different shaped MIIR
objects as input.} & The setHistout method is not designed for this call, for that reason must
this call fail. & pass \\ \cline{3-4}
        &    & 1) Check the histout has the correct values & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setHistout method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setHistout method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setHistout'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setHistout'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setHistout method can modify the input MIIR object.} & Test that the setHistout method can modify the input MIIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'iirhp' and 'ain' are now different.
2) Check that 'ain' has the correct histout field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setHistout method can set the property with a plist.} & Test that the setHistout method can modify the property 'histout'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct histout field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for miir/setHistout.}
\label{tab:miir_setHistout}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/setIunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setIunits method works with a vector of MIIR objects as input.} & Test that the setIunits method works for a vector of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setIunits method works with a matrix of MIIR objects as input.} & Test that the setIunits method works for a matrix of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setIunits method works with a list of MIIR objects as input.} & Test that the setIunits method works for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setIunits method works with a mix of different shaped MIIR
objects as input.} & Test that the setIunits method works with an input of matrices and vectors
and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setIunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setIunits method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setIunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setIunits'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setIunits method can modify the input MIIR object.} & Test that the setIunits method can modify the input MIIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'iirhp' and 'ain' are now different.
2) Check that 'ain' has the correct iunits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setIunits method can set the property with a plist.} & Test that the setIunits method can modify the property 'iunits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct iunits field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setIunits method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for miir/setIunits.}
\label{tab:miir_setIunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/setName} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setName method works with a vector of MIIR objects as input.} & Test that the setName method works for a vector of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setName method works with a matrix of MIIR objects as input.} & Test that the setName method works for a matrix of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setName method works with a list of MIIR objects as input.} & Test that the setName method works for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setName method works with a mix of different shaped MIIR
objects as input.} & Test that the setName method works with an input of matrices and vectors
and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setName method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setName method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setName'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setName'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setName method can modify the input MIIR object.} & Test that the setName method can modify the input MIIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'iirhp' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setName method can set the property with a plist.} & Test that the setName method can modify the property 'name'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setName method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for miir/setName.}
\label{tab:miir_setName}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/setOunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setOunits method works with a vector of MIIR objects as input.} & Test that the setOunits method works for a vector of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setOunits method works with a matrix of MIIR objects as input.} & Test that the setOunits method works for a matrix of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'iirm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setOunits method works with a list of MIIR objects as input.} & Test that the setOunits method works for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setOunits method works with a mix of different shaped MIIR
objects as input.} & Test that the setOunits method works with an input of matrices and vectors
and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setOunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setOunits method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setOunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setOunits'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setOunits method can modify the input MIIR object.} & Test that the setOunits method can modify the input MIIR object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'iirhp' and 'ain' are now different.
2) Check that 'ain' has the correct ounits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setOunits method can set the property with a plist.} & Test that the setOunits method can modify the property 'ounits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct ounits field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setOunits method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for miir/setOunits.}
\label{tab:miir_setOunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the string method works with a vector of MIIR objects as input.} & Test that the string method works for a vector of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the string method works with a matrix of MIIR objects as input.} & Test that the string method works for a matrix of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the string method works with a list of MIIR objects as input.} & Test that the string method works for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the string method works with a mix of different shaped MIIR objects
as input.} & Test that the string method works with an input of matrices and vectors
and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the string method properly applies history.} & The method string doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the string method doesn't work if the MIIR object have more
than one history step.} & The method string throws an error because the input object have more than
one history step. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for miir/string.}
\label{tab:miir_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf miir/type} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the type method works with a vector of MIIR objects as input.} & Test that the type method works for a vector of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the type method works with a matrix of MIIR objects as input.} & Test that the type method works for a matrix of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the type method works with a list of MIIR objects as input.} & Test that the type method works for a list of MIIR objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the type method works with a mix of different shaped MIIR objects
as input.} & Test that the type method works with an input of matrices and vectors
and single MIIR objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the type method properly applies history.} & The method type doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for miir/type.}
\label{tab:miir_type}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of PARFRAC objects as input.} & Test that the char method works for a vector of PARFRAC objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of PARFRAC objects as input.} & Test that the char method works for a matrix of PARFRAC objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of PARFRAC objects as input.} & Test that the char method works for a list of PARFRAC objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped PARFRAC objects
as input.} & Test that the char method works with an input of matrices and vectors
and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the char method properly applies history.} & The method char doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for parfrac/char.}
\label{tab:parfrac_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for parfrac/copy.}
\label{tab:parfrac_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/created} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the created method works with a vector of PARFRAC objects as
input.} & Test that the created method works for a vector of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the created method works with a matrix of PARFRAC objects as
input.} & Test that the created method works for a matrix of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the created method works with a list of PARFRAC objects as
input.} & Test that the created method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the created method works with a mix of different shaped
PARFRAC objects as input.} & Test that the created method works with an input of matrices and
vectors and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the created method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the created method can be used with the modify command.} & Tests that the created method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the created method retruns always a well defined time object
even for an empty input object.} & Test that the created method with an empty 'PARFRAC object & pass \\ \cline{3-4}
        &    & 1) Check that the output is a time object with a ell defined time. & pass \\ \hline
\caption{Unit tests for parfrac/created.}
\label{tab:parfrac_created}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/creator} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the creator method works with a vector of PARFRAC objects as
input.} & Test that the creator method works for a vector of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the creator method works with a matrix of PARFRAC objects as
input.} & Test that the creator method works for a matrix of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the creator method works with a list of PARFRAC objects as
input.} & The creator method doesn't work for a list of PARFRAC objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the creator method works with a mix of different shaped
PARFRAC objects as input.} & The creator method doesn't work with different shaped input objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the creator method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the creator method can be used with the modify command.} & Tests that the creator method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the creator method retruns all creator(s)/modifier(s) which
are in the history.} & Test that the creator method uses the option 'all' direct or in a
plist. The test file must have the modifier 'first', 'second' and
'third' & pass \\ \cline{3-4}
        &    & 1) Check that out1 contains only one creator
2) Check that out2 contain more creator/modifier & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests the negative case for the option 'all'.} & Test that the creator method throws an error if the option 'all' is
used in connection with a matrix/vector of PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for parfrac/creator.}
\label{tab:parfrac_creator}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of PARFRAC objects as
input.} & Test that the display method works for a vector of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of PARFRAC objects as
input.} & Test that the display method works for a matrix of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of PARFRAC objects as
input.} & Test that the display method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped
PARFRAC objects as input.} & Test that the display method works with an input of matrices and
vectors and single PARFRAC objects as. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the display method properly applies history.} & The method display doesn't change the data, thus it is not possible
to check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for parfrac/display.}
\label{tab:parfrac_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/eq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eq method works with a vector of PARFRAC objects as input.} & Test that the eq method works for a vector of PARFRAC objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eq method works with a matrix of PARFRAC objects as input.} & Test that the eq method works for a matrix of PARFRAC objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eq method works with a list of PARFRAC objects as input.} & The eq method doesn't works for a list of PARFRAC objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eq method works with a mix of different shaped PARFRAC objects
as input.} & The eq method doesn't works for a list of PARFRAC objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the eq method properly applies history.} & The eq method doesn't change the PARFRAC object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception
list with properties where a public set method exist.} & Test the eq method with the exception 'name'. Use the option
'internal' to suppress the history. It is necessary to add 'created'
to the exception list because 'pa' is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'iunits'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because 'pa' is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception
list with properties where a public set method exist.} & Test the eq method with the exception 'ounits'. Use the option
'internal' to suppress the history. It is necessary to add 'created'
to the exception list because 'pa' is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the eq method with an exception list which is in a plist.} & Test that the eq method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for parfrac/eq.}
\label{tab:parfrac_eq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/get} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the get method of the parfrac class.} & Test that the get returns returns the value of the specified
property. Do this for all properties of the PARFRAC object. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the get method works with a plist.} & Test that the get returns returns the value of the specified
property which is defined in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests the get method of the parfrac class.} & Test that the get throws an error if the input are more than
one PARFRAC object. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for parfrac/get.}
\label{tab:parfrac_get}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/getlowerFreq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the getlowerFreq method of the parfrac class.} & Test that the getlowerFreq returns the lowest frequence of the pole
in the parfrac object. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests the getlowerFreq method of the parfrac class.} & Test that the getlowerFreq throws an error if the input are more than
one parfrac. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for parfrac/getlowerFreq.}
\label{tab:parfrac_getlowerFreq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/getupperFreq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the getupperFreq method of the parfrac class.} & Test that the getupperFreq returns the lowest frequence of the pole
in the parfrac object. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests the getupperFreq method of the parfrac class.} & Test that the getupperFreq throws an error if the input are more than
one parfrac. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for parfrac/getupperFreq.}
\label{tab:parfrac_getupperFreq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/index} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the index method works with a vector of PARFRAC objects as
input.} & Test that the index method works for a vector of PARFRAC objects as
input. The following indexing should work:
I = [ 1 2 3 ] or (I/J) = [(1,1), (1,2), (1,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the index method works with a matrix of PARFRAC objects as
input.} & Test that the index method works for a matrix of PARFRAC objects as
input. The following indexing should work:
I = [ 1 3 5 ] or (I/J) = [(1,1), (1,2), (1,3)]
[ 2 4 6 ]            [(2,1), (2,2), (2,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the index method works with a list of PARFRAC objects as
input.} & The index method doesn't work for a list of PARFRAC objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the index method properly applies history.} & Test that the result of index have an additional history step. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds
to 'index'. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the index method works for the modifier command.} & Tests that the index method works for the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the index method can be controled with a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the index method selects more objects if I have more indices.} & Test that the index method selects more objects if I have more indices. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
\caption{Unit tests for parfrac/index.}
\label{tab:parfrac_index}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/isprop} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isprop method works with a vector of PARFRAC objects as
input.} & Test that the isprop method works for a vector of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isprop method works with a matrix of PARFRAC objects as
input.} & Test that the isprop method works for a matrix of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isprop method works with a list of PARFRAC objects as
input.} & Test that the isprop method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isprop method works with a mix of different shaped
PARFRAC objects as input.} & Test that the isprop method works with an input of matrices and
vectors and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isprop method properly applies history.} & The method isprop doesn't change the object, thus it is not necessary
to apply history. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the isprop method works for each property.} & Test that the isprop method works for the properties:
'res', 'poles', 'pmul', 'dir', 'iunits', 'ounits', 'hist',
'name' & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the negative case and the not function command.} & Test that the isprop method retrun false for a unknown property and
for methods of the object. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for parfrac/isprop.}
\label{tab:parfrac_isprop}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for parfrac/loadobj.}
\label{tab:parfrac_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/ne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ne method works with a vector of PARFRAC objects as input.} & Test that the ne method works for a vector of PARFRAC objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ne method works with a matrix of PARFRAC objects as input.} & Test that the ne method works for a matrix of PARFRAC objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ne method works with a list of PARFRAC objects as input.} & The ne method doesn't works for a list of PARFRAC objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ne method works with a mix of different shaped PARFRAC
objects as input.} & The ne method doesn't works for a list of PARFRAC objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ne method properly applies history.} & The ne method doesn't change the PARFRAC object, thus will no history
added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the ne method with an exception list.
The function parfrac/ne use the function parfrac/eq so it is not
necessary to check all possibilities of the exception list.} & Test the ne method with the exception 'name'. Use the option
'internal' to suppress the history. It is necessary to add 'created'
to the exception list because pf is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the ne method with an exception list which is in a plist.} & Test that the ne method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for parfrac/ne.}
\label{tab:parfrac_ne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/parfrac} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the parfrac method works with a vector of PARFRAC objects as
input.} & Test that the parfrac method works with a vector of PARFRAC objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output PARFRACs is the same as the
input shape.
2) Check that each output PARFRAC is a copy of the input PARFRAC.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the parfrac method works with a matrix of PARFRAC objects as
input.} & Test that the parfrac method works with a matrix of PARFRAC objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output PARFRACs is the same as the
input shape.
2) Check that each output PARFRAC is a copy of the input PARFRAC.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the parfrac method works with a list of PARFRAC objects as
input.} & Test that the parfrac method works with a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output PARFRAC is a copy of the input PARFRAC.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the parfrac method works with a mix of different shaped
PARFRACs as input.} & Test that the parfrac method works with a mix of different shaped
PARFRACs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output PARFRAC is a copy of the input PARFRAC.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the parfrac method properly applies history.} & Test that the result of applying the parfrac method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the parfrac method properly applies history to the copy
constructor.} & Test that the output can be processed back with the 'rebuild' method.
Test the constructor with a different number of inputs. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the original objects are not changed by the setter
function
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the parfrac method properly applies history to the read
MAT-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the loaded object is the same as the saved object.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the parfrac method properly applies history to the read
XML-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the loaded object is the same as the saved object.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the parfrac method properly doesn't apply history to the
struct constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Tests that the parfrac method properly applies history to the rational
constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the parfrac method properly applies history to the pzmodel
constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the parfrac method properly applies history to the
plist(filename) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the
plist(conn) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the
plist(res || poles || dir) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the
plist(pzmodel) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the
plist(parfrac) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the
plist(<plist-object>) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the conn+Id
constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the
res + poles + direct terms object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the
res + poles + direct terms + name object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{22 } & \multirow{2}{5cm}{Tests that the PARFRAC method properly applies history to the
res + poles + direct terms + name + iunits + ounits object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'parfrac'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for parfrac/parfrac.}
\label{tab:parfrac_parfrac}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/rebuild} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rebuild method works with a vector of PARFRAC objects as
input.} & Test that the rebuild method works for a vector of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rebuild method works with a matrix of PARFRAC objects as
input.} & Test that the rebuild method works for a matrix of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rebuild method works with a list of PARFRAC objects as
input.} & Test that the rebuild method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rebuild method works with a mix of different shaped
PARFRAC objects as input.} & Test that the rebuild method works with an input of matrices and
vectors and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rebuild method properly applies history.} & The method rebuild doesn't change the data, thus it is not possible
to check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the rebuild method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for parfrac/rebuild.}
\label{tab:parfrac_rebuild}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/resp} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the resp method works with a vector of PARFRAC objects as
input.} & Test that the resp method works for a vector of PARFRAC objects as
input. Test the method with an output and with no output
(a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'pfv'
3) Check that each output PARFRAC contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the resp method works with a matrix of PARFRAC objects as
input.} & Tests that the resp method works with a matrix of PARFRAC objects as
input. Test the method with an output and with no output
(a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'pfm'
3) Check that each output PARFRAC contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the resp method works with a list of PARFRAC objects as
input.} & Tests that the resp method works with a list of PARFRAC objects as
input. Test the method with an output and with no output
(a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'rain'
3) Check that each output PARFRAC contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the resp method works with a mix of different shaped
PARFRAC objects as input.} & Tests that the resp method works with a mix of different shaped
PARFRAC objects as input. Test the method with an output and with no
output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'rain'
3) Check that each output PARFRAC contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the resp method properly applies history.} & Test that the result of applying the resp method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'resp'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that modify command plots the response into a diagram.} & Tests that modify command plots the response into a diagram. & pass \\ \cline{3-4}
        &    & 1) Check the response diagram. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the output AO of the resp method keeps the shape of the used
input f vector. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the resp method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the resp method uses the x-data of an input AO for f-vector.} & Call the method with different method to pass an AO in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the resp method uses the specified f-vector to compute the
response.} & Call the method with different method to pass an f-vector in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute
the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for parfrac/resp.}
\label{tab:parfrac_resp}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/save} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the save method works with a vector of PARFRAC objects as input.} & Test that the save method works for a vector of PARFRAC objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the
same as in 'pfv'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the save method works with a matrix of PARFRAC objects as
input.} & Test that the save method works for a matrix of PARFRAC objects as
input. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the
same as in 'pfm'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the save method works with a list of PARFRAC objects as input.} & Test that the save method works for a list of PARFRAC objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the
same as in the list
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the save method works with a mix of different shaped PARFRAC
objects as input.} & Test that the save method works with an input of matrices and vectors
and single PARFRAC objects. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output PARFRAC object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the save method properly applies history.} & Test that the result of applying the save method can be processed back
to an m-file. Do this for both extensions 'mat' and 'xml' & pass \\ \cline{3-4}
        &    & 1) Check that the history applies to the output object. Check that
save doesn't add a history step to the input object.
2) Check that the read object doesn't contain the save + load history steps.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the save method works with the modify command.} & Use the save method with the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't apply the history.
2) Check the output against the input.
3) Check the history of the output against the input. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the save method uses the filename which is stored in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the save method with different complex PARFRAC objects} & Test the save method with different complex PARFRAC objects & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for parfrac/save.}
\label{tab:parfrac_save}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/setIunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setIunits method works with a vector of PARFRAC objects
as input.} & Test that the setIunits method works for a vector of PARFRAC objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setIunits method works with a matrix of PARFRAC objects
as input.} & Test that the setIunits method works for a matrix of PARFRAC objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setIunits method works with a list of PARFRAC objects as
input.} & Test that the setIunits method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setIunits method works with a mix of different shaped
PARFRAC objects as input.} & Test that the setIunits method works with an input of matrices and
vectors and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setIunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setIunits method can be
processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setIunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setIunits'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setIunits method can modify the input PARFRAC object.} & Test that the setIunits method can modify the input PARFRAC object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'pf3' and 'ain' are now different.
2) Check that 'ain' has the correct iunits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setIunits method can set the property with a plist.} & Test that the setIunits method can modify the property 'iunits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct iunits field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setIunits method pass back the output objects to a list
of output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for parfrac/setIunits.}
\label{tab:parfrac_setIunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/setName} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setName method works with a vector of PARFRAC objects as
input.} & Test that the setName method works for a vector of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setName method works with a matrix of PARFRAC objects as
input.} & Test that the setName method works for a matrix of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setName method works with a list of PARFRAC objects as
input.} & Test that the setName method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setName method works with a mix of different shaped
PARFRAC objects as input.} & Test that the setName method works with an input of matrices and
vectors and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setName method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setName method can be processed
back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setName'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setName'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setName method can modify the input PARFRAC object.} & Test that the setName method can modify the input PARFRAC object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'pf3' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setName method can set the property with a plist.} & Test that the setName method can modify the property 'name'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setName method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for parfrac/setName.}
\label{tab:parfrac_setName}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/setOunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setOunits method works with a vector of PARFRAC objects
as input.} & Test that the setOunits method works for a vector of PARFRAC objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setOunits method works with a matrix of PARFRAC objects
as input.} & Test that the setOunits method works for a matrix of PARFRAC objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pfm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setOunits method works with a list of PARFRAC objects as
input.} & Test that the setOunits method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setOunits method works with a mix of different shaped
PARFRAC objects as input.} & Test that the setOunits method works with an input of matrices and
vectors and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setOunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setOunits method can be
processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setOunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setOunits'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setOunits method can modify the input PARFRAC object.} & Test that the setOunits method can modify the input PARFRAC object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'pf3' and 'ain' are now different.
2) Check that 'ain' has the correct ounits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setOunits method can set the property with a plist.} & Test that the setOunits method can modify the property 'ounits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct ounits field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setOunits method pass back the output objects to a list
of output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for parfrac/setOunits.}
\label{tab:parfrac_setOunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the string method works with a vector of PARFRAC objects as
input.} & Test that the string method works for a vector of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the string method works with a matrix of PARFRAC objects as
input.} & Test that the string method works for a matrix of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the string method works with a list of PARFRAC objects as
input.} & Test that the string method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the string method works with a mix of different shaped
PARFRAC objects as input.} & Test that the string method works with an input of matrices and
vectors and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the string method properly applies history.} & The method string doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the string method doesn't work if the PARFRAC object have
more than one history step.} & The method string throws an error because the input object have more
than one history step. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for parfrac/string.}
\label{tab:parfrac_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf parfrac/type} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the type method works with a vector of PARFRAC objects as
input.} & Test that the type method works for a vector of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the type method works with a matrix of PARFRAC objects as
input.} & Test that the type method works for a matrix of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the type method works with a list of PARFRAC objects as
input.} & Test that the type method works for a list of PARFRAC objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the type method works with a mix of different shaped PARFRAC
objects as input.} & Test that the type method works with an input of matrices and vectors
and single PARFRAC objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the type method properly applies history.} & The method type doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for parfrac/type.}
\label{tab:parfrac_type}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for pest/copy.}
\label{tab:pest_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for pest/loadobj.}
\label{tab:pest_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/pest} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [pest/pest] method works with a vector of objects as input.} & Test that the [pest/pest] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [pest/pest] method works with a matrix of objects as input.} & Test that the [pest/pest] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [pest/pest] method works with a list of objects as input.} & Test that the [pest/pest] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [pest/pest] method works with a mix of different arrays of objects as input.} & Tests that the [pest/pest] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [pest/pest] method properly applies history.} & Test that the result of applying the [pest/pest] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/pest]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{60 } & \multirow{2}{5cm}{Tests that the constructor method doesn't apply history to the read
MAT-file constructor.} & Tests that the constructor method doesn't apply history to the read
MAT-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{61 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the read
XML-file constructor.} & Tests that the constructor properly applies history to the read
XML-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{62 } & \multirow{2}{5cm}{Tests that the constructor properly applies history in the struct constructor.} & Tests that the constructor properly applies history in the struct constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{64 } & \multirow{2}{5cm}{Tests that the contructor properly applies history to the
plist(filename) constructor.} & Tests that the contructor properly applies history to the
plist(filename) constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{65 } & \multirow{2}{5cm}{Tests that the contructed object can be submitted and retrieved.} & Tests that the contructed object can be submitted and retrieved. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{68 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the conn+Id constructor.} & Tests that the constructor properly applies history to the conn+Id
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/pest.}
\label{tab:pest_pest}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setChain} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setChain] method works for a list of objects as input.} & Tests that the [pest/setChain] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setChain] method works for a list of objects as input.} & Tests that the [pest/setChain] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setChain] method works for a list of objects as input.} & Tests that the [pest/setChain] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setChain] method properly applies history.} & Test that the result of applying the [pest/setChain] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setChain]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setChain] method can modify the input AO.} & Test that the [pest/setChain] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setChain] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setChain.}
\label{tab:pest_setChain}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setChi2} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setChi2] method works for a list of objects as input.} & Tests that the [pest/setChi2] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setChi2] method works for a list of objects as input.} & Tests that the [pest/setChi2] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setChi2] method works for a list of objects as input.} & Tests that the [pest/setChi2] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setChi2] method properly applies history.} & Test that the result of applying the [pest/setChi2] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setChi2]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setChi2] method can modify the input AO.} & Test that the [pest/setChi2] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setChi2] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setChi2.}
\label{tab:pest_setChi2}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setCorr} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setCorr] method works for a list of objects as input.} & Tests that the [pest/setCorr] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setCorr] method works for a list of objects as input.} & Tests that the [pest/setCorr] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setCorr] method works for a list of objects as input.} & Tests that the [pest/setCorr] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setCorr] method properly applies history.} & Test that the result of applying the [pest/setCorr] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setCorr]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setCorr] method can modify the input AO.} & Test that the [pest/setCorr] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setCorr] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setCorr.}
\label{tab:pest_setCorr}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setCov} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setCov] method works for a list of objects as input.} & Tests that the [pest/setCov] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setCov] method works for a list of objects as input.} & Tests that the [pest/setCov] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setCov] method works for a list of objects as input.} & Tests that the [pest/setCov] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setCov] method properly applies history.} & Test that the result of applying the [pest/setCov] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setCov]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setCov] method can modify the input AO.} & Test that the [pest/setCov] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setCov] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setCov.}
\label{tab:pest_setCov}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setDof} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setDof] method works for a list of objects as input.} & Tests that the [pest/setDof] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setDof] method works for a list of objects as input.} & Tests that the [pest/setDof] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setDof] method works for a list of objects as input.} & Tests that the [pest/setDof] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setDof] method properly applies history.} & Test that the result of applying the [pest/setDof] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setDof]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setDof] method can modify the input AO.} & Test that the [pest/setDof] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setDof] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setDof.}
\label{tab:pest_setDof}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setDy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setDy] method works for a list of objects as input.} & Tests that the [pest/setDy] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setDy] method works for a list of objects as input.} & Tests that the [pest/setDy] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setDy] method works for a list of objects as input.} & Tests that the [pest/setDy] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setDy] method properly applies history.} & Test that the result of applying the [pest/setDy] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setDy]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setDy] method can modify the input AO.} & Test that the [pest/setDy] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setDy] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setDy.}
\label{tab:pest_setDy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setModels} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setModels] method works for a list of objects as input.} & Tests that the [pest/setModels] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setModels] method works for a list of objects as input.} & Tests that the [pest/setModels] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setModels] method works for a list of objects as input.} & Tests that the [pest/setModels] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setModels] method properly applies history.} & Test that the result of applying the [pest/setModels] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setModels]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setModels] method can modify the input AO.} & Test that the [pest/setModels] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setModels] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setModels.}
\label{tab:pest_setModels}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setNames} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setNames] method works for a list of objects as input.} & Tests that the [pest/setNames] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setNames] method works for a list of objects as input.} & Tests that the [pest/setNames] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setNames] method works for a list of objects as input.} & Tests that the [pest/setNames] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setNames] method properly applies history.} & Test that the result of applying the [pest/setNames] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setNames]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setNames] method can modify the input AO.} & Test that the [pest/setNames] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setNames] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setNames.}
\label{tab:pest_setNames}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setPdf} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setPdf] method works for a list of objects as input.} & Tests that the [pest/setPdf] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setPdf] method works for a list of objects as input.} & Tests that the [pest/setPdf] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setPdf] method works for a list of objects as input.} & Tests that the [pest/setPdf] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setPdf] method properly applies history.} & Test that the result of applying the [pest/setPdf] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setPdf]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setPdf] method can modify the input AO.} & Test that the [pest/setPdf] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setPdf] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setPdf.}
\label{tab:pest_setPdf}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setY} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setY] method works for a list of objects as input.} & Tests that the [pest/setY] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setY] method works for a list of objects as input.} & Tests that the [pest/setY] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setY] method works for a list of objects as input.} & Tests that the [pest/setY] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setY] method properly applies history.} & Test that the result of applying the [pest/setY] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setY]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setY] method can modify the input AO.} & Test that the [pest/setY] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setY] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setY.}
\label{tab:pest_setY}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pest/setYunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShapeInternal } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setYunits] method works for a list of objects as input.} & Tests that the [pest/setYunits] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setYunits] method works for a list of objects as input.} & Tests that the [pest/setYunits] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [pest/setYunits] method works for a list of objects as input.} & Tests that the [pest/setYunits] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [pest/setYunits] method properly applies history.} & Test that the result of applying the [pest/setYunits] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[pest/setYunits]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [pest/setYunits] method can modify the input AO.} & Test that the [pest/setYunits] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [pest/setYunits] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pest/setYunits.}
\label{tab:pest_setYunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/append} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the append method works with a vector of PLIST objects as input.} & Test that the append method appends all input PLIST objects to one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output is one PLIST object.
2) Check that the output PLIST contains all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the append method works with a matrix of PLIST objects as input.} & Test that the append method appends all input PLIST objects to one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output is one PLIST object.
2) Check that the output PLIST contains all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the append method works with a list of PLIST objects as input.} & Test that the append method appends all input PLIST objects to one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output is one PLIST object.
2) Check that the output PLIST contains all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the append method works with a mix of different shaped PLIST
objects as input.} & Test that the append method appends all input PLIST objects to one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output is one PLIST object.
2) Check that the output PLIST contains all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the append method applies the modify command} & Test that the append method can modify the input PLIST by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'pl1' and 'plin' are now different.
2) Check that 'ain' append the key/value pair. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the append method with different input variants for the key/value pair.} & Test that the append method accepts plists-objects, param-objects or
direct key/value pairs as an input. & pass \\ \cline{3-4}
        &    & 1) Check that the output have all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the append method appends the key always in capital letter} & Test that the append method appends the key always in capital letter & pass \\ \cline{3-4}
        &    & 1) Check that the key is in capital letters & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the append method in a negative case.} & The append method throwns an error if a user tries to append a key
which already exist. & pass \\ \cline{3-4}
        &    & 1) Check that the negative case doesn't change the input object. & pass \\ \hline
\caption{Unit tests for plist/append.}
\label{tab:plist_append}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of PLIST objects as input.} & Test that the char method works for a vector of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of PLIST objects as input.} & Test that the char method works for a matrix of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of PLIST objects as input.} & Test that the char method works for a list of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped PLIST objects
as input.} & Test that the char method works with an input of matrices and vectors
and single PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
\caption{Unit tests for plist/char.}
\label{tab:plist_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/combine} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the combine method works with a vector of PLIST objects as input.} & Test that the combine method combines all input PLIST objects to one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output is one PLIST object.
2) Check that the output PLIST contains all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the combine method works with a matrix of PLIST objects as input.} & Test that the combine method combines all input PLIST objects to one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output is one PLIST object.
2) Check that the output PLIST contains all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the combine method works with a list of PLIST objects as input.} & Test that the combine method combines all input PLIST objects to one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output is one PLIST object.
2) Check that the output PLIST contains all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the combine method works with a mix of different shaped PLIST
objects as input.} & Test that the combine method combines all input PLIST objects to one object. & pass \\ \cline{3-4}
        &    & 1) Check that the output is one PLIST object.
2) Check that the output PLIST contains all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the combine method applies the modify command} & Test that the combine method can modify the input PLIST by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'pl1' and 'plin' are now different.
2) Check that 'ain' combine the key/value pair. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the combine method doen't overwrite existing keys.} & Duplicate parameters which are given priority in the order in which
they appear in the input. & pass \\ \cline{3-4}
        &    & 1) Check that the output have all key/value pairs in the order they
appear. & pass \\ \hline
\caption{Unit tests for plist/combine.}
\label{tab:plist_combine}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for plist/copy.}
\label{tab:plist_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of PLIST objects as input.} & Test that the display method works for a vector of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of PLIST objects as input.} & Test that the display method works for a matrix of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of PLIST objects as input.} & Test that the display method works for a list of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped
PLIST objects as input.} & Test that the display method works with an input of matrices and vectors
and single PLIST objects as. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
\caption{Unit tests for plist/display.}
\label{tab:plist_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/eq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eq method works with a vector of PLIST objects as input.} & Test that the eq method works for a vector of PLIST objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eq method works with a matrix of PLIST objects as input.} & Test that the eq method works for a matrix of PLIST objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eq method works with a list of PLIST objects as input.} & The eq method doesn't works for a list of PLIST objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eq method works with a mix of different shaped PLIST objects
as input.} & The eq method doesn't works for a list of PLIST objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'name'. It is necessary to add
'created' to the exception list because pl is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the eq method with an exception list which is in a plist.} & Test that the eq method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for plist/eq.}
\label{tab:plist_eq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/find} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the find method applies the modify command.} & Test that it is possible to use modify command and show that this
method ignoring case. & pass \\ \cline{3-4}
        &    & 1) Check that out1..3 have all the same object. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Test that the find method accepts a plist.} & Test that the find method take the 'key' from a 'search' plist. & pass \\ \cline{3-4}
        &    & 1) Check that the output have the correct value. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Test the find method returns an empty array if the 'key' doesn't
exist in the PLIST.} & Test the find method returns an empty array if the 'key' doesn't
exist in the PLIST. & pass \\ \cline{3-4}
        &    & 1) Check that the output is an empty array. & pass \\ \hline
\caption{Unit tests for plist/find.}
\label{tab:plist_find}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/get} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the get method of the plist class.} & Test that the get returns returns the value of the specified
property. Do this for all properties of the PLIST object. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the get method works with a plist.} & Test that the get returns returns the value of the specified
property which is defined in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests the get method of the plist class.} & Test that the get throws an error if the input are more than
one PLIST object. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for plist/get.}
\label{tab:plist_get}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/isparam} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isparam method works with a vector of PLIST objects as input.} & Tests that the isparam method works with a vector of PLIST objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output have the same size as the input.
2) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isparam method works with a matrix of PLIST objects as
input.} & Tests that the isparam method works with a matrix of PLIST objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output have the same size as the input.
2) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isparam method works with a list of PLIST objects as
input.} & Tests that the isparam method works with a list of PLIST objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output have the same size as the input.
2) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isparam method works with a mix of different shaped PLIST
objects as input.} & Tests that the isparam method works with a mix of different shaped
PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output have the same size as the input.
2) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isparam method applies the modify command} & Test that the isparam method can used in the modifier form. & pass \\ \cline{3-4}
        &    & 1) Test that plin doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the isparam method with a positiv match.} & Test the isparam method with different input. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for plist/isparam.}
\label{tab:plist_isparam}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/isprop} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isprop method works with a vector of PLIST objects as input.} & Test that the isprop method works for a vector of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'plv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isprop method works with a matrix of PLIST objects as input.} & Test that the isprop method works for a matrix of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'plm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isprop method works with a list of PLIST objects as input.} & Test that the isprop method works for a list of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isprop method works with a mix of different shaped
PLIST objects as input.} & Test that the isprop method works with an input of matrices and vectors
and single PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isprop method works for each property.} & Test that the isprop method works for the properties:
'params', 'created', 'creator', 'name' & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the negative case and the not function command.} & Test that the isprop method retrun false for a unknown property and for
methods of the object. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for plist/isprop.}
\label{tab:plist_isprop}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for plist/loadobj.}
\label{tab:plist_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/ne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ne method works with a vector of PLIST objects as input.} & Test that the ne method works for a vector of PLIST objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ne method works with a matrix of PLIST objects as input.} & Test that the ne method works for a matrix of PLIST objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ne method works with a list of PLIST objects as input.} & The ne method doesn't works for a list of PLIST objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ne method works with a mix of different shaped PLIST objects
as input.} & The ne method doesn't works for a list of PLIST objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ne method properly applies history.} & The ne method doesn't change the PLIST object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the ne method with an exception list.
The function plist/ne use the function plist/eq so it is not necessary to check
all possibilities of the exception list.} & Test the ne method with the exception 'name'. It is necessary to add
'created' to the exception list because pl is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the ne method with an exception list which is in a plist.} & Test that the ne method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for plist/ne.}
\label{tab:plist_ne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/nparams} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the nparams method works with a vector of PLIST objects as input.} & Test that the nparams method returns the number of PARAM objects in
the PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs is the same as the number of
input PLIST objects.
2) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the nparams method works with a vector of PLIST objects as input.} & Test that the nparams method returns the number of PARAM objects in
the PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs is the same as the number of
input PLIST objects.
2) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the nparams method works with a list of PLIST objects as input.} & Test that the nparams method returns the number of PARAM objects in
the PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs is the same as the number of
input PLIST objects.
2) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the nparams method works with a mix of different shaped PLIST
objects as input.} & Test that the nparams method returns the number of PARAM objects in
the PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of outputs is the same as the number of
input PLIST objects.
2) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the nparams method applies the modify command} & Test that the nparams method can used in the modifier style. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for plist/nparams.}
\label{tab:plist_nparams}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/parse} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the parse method works with a vector of PLIST objects as input.} & The parse method is an internal method and it doesn't work for vector
of PLIST objects as an input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the parse method works with a matrix of PLIST objects as input.} & The parse method is an internal method and it doesn't work for matrix
of PLIST objects as an input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the parse method works with a list of PLIST objects as input.} & The parse method is an internal method and it doesn't work for list
of PLIST objects as an input. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the parse method works with a mix of different shaped PLIST
objects as input.} & The parse method is an internal method and it doesn't work for
different shaped PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the parse method with non-dependent elements.} & Test that the parse method can convert non-dependent elements. & pass \\ \cline{3-4}
        &    & 1) Check the right number of parameter in out.
2) Check that the correct values are converted. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the parse method with dependent elements.} & Test that the parse method can convert dependent elements. & pass \\ \cline{3-4}
        &    & 1) Check the right number of parameter in out.
2) Check that the correct values are converted. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that upper/lower case doesn't matter in the parse method.} & Tests that upper/lower case doesn't matter in the parse method. & pass \\ \cline{3-4}
        &    & 1) Check the right number of parameter in out.
2) Check that the correct values are converted. & pass \\ \hline
\caption{Unit tests for plist/parse.}
\label{tab:plist_parse}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/plist} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the plist method works with a vector of PLIST objects as input.} & Test that the plist method works with a vector of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output PLISTs is the same as the input shape.
2) Check that each output PLIST is a copy of the input PLIST. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the plist method works with a matrix of PLIST objects as input.} & Test that the plist method works with a matrix of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output PLISTs is the same as the input shape.
2) Check that each output PLIST is a copy of the input PLIST. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the plist method works with a list of PLIST objects as input.} & Test that the plist method works with a list of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output PLIST is a copy of the input PLIST. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the plist method works with a mix of different shaped PLISTs as
input.} & Test that the plist method works with a mix of different shaped PLISTs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output PLIST is a copy of the input PLIST. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests the MAT-file constructor.} & Tests the MAT-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the saved object is the same as the loaded object. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests the XML-file constructor.} & Tests the XML-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the saved object is the same as the loaded object. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the plist method for a struct as an input.} & Tests that the plist method for a struct as an input. & pass \\ \cline{3-4}
        &    & 2) Check the built object. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests the param constructor.} & Tests the param constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the input parameter objects & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests the plist(filename) constructor.} & Tests the plist(filename) constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the loaded object is the same as the saved object & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Tests the plist(conn) constructor.} & Tests the plist(conn) constructor. & pass \\ \cline{3-4}
        &    & 1) Check the retrieved object against the submitted object. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests the conn+Id constructor.} & Tests the conn+Id constructor. & pass \\ \cline{3-4}
        &    & 1) Check the retrieved object against the submitted object. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests the key/value constructor} & Tests the key/value constructor & pass \\ \cline{3-4}
        &    & 1) Check the right number of parameter in the PLIST object
2) Check the parameter in the PLIST object
3) Check that the key is in capital letter. & pass \\ \hline
\caption{Unit tests for plist/plist.}
\label{tab:plist_plist}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/plist2cmds} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the plist2cmds method works with a vector of PLIST objects as input.} & The plist2cmds method doesn't works for a vector of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the plist2cmds method works with a matrix of PLIST objects as input.} & The plist2cmds method doesn't works for a matrix of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the plist2cmds method works with a list of PLIST objects as input.} & The plist2cmds method doesn't works for a list of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the plist2cmds method works with a mix of different shaped
PLIST objects as input.} & The plist2cmds method doesn't works with an input of matrices and vectors
and single PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the plist2cmds method accepts different objects for the 'val' property.} & Create a plist with all possible objects for the 'val' property. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable plist2cmds & pass \\ \hline
\caption{Unit tests for plist/plist2cmds.}
\label{tab:plist_plist2cmds}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/pset} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the pset method works with a vector of PLIST objects as input.} & Test that the pset method set or add a key/value pair to all PLIST
objects in the vector. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output is the same as the shape of the input
2) Check that the output PLIST contains the new key/value pair. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the pset method works with a matrix of PLIST objects as input.} & Test that the pset method set or add a key/value pair to all PLIST
objects in the matrix. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output is the same as the shape of the input
2) Check that the output PLIST contains the new key/value pair. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the pset method works with a list of PLIST objects as input.} & Test that the pset method set or add a key/value pair to all PLIST
objects in the input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output is the same as the shape of the input
2) Check that the output PLIST contains the new key/value pair. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the pset method works with a mix of different shaped PLIST
objects as input.} & Test that the pset method set or add a key/value pair to all PLIST
objects in the input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output is the same as the shape of the input
2) Check that the output PLIST contains the new key/value pair. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the pset method applies the modify command} & Test that the pset method can modify the input PLIST by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'pleq' are now different.
2) Check that 'plmo' and 'out' are the same.
3) Check that 'out' and 'plmo' have the new key/value pair
4) Check that pleq don't have the new key/value pair & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the pset method works for different input variants for the key/value
pair.} & Test that the pset method accepts param-objects or direct key/value
pairs as an input. & pass \\ \cline{3-4}
        &    & 1) Check that the output have all key/value pairs. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the pset method in the setting and appending case.} & Create an example where the pset method set a key to a new value and
an example where pset append the new key/value pair & pass \\ \cline{3-4}
        &    & 1) Check the number of parametes in the output.
2) Check the new key/value pair & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test that the pset method sets the key always in capital letter} & Test that the pset method sets the key always in capital letter & pass \\ \cline{3-4}
        &    & 1) Check that the key is in capital letters & pass \\ \hline
\caption{Unit tests for plist/pset.}
\label{tab:plist_pset}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/remove} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the remove method works with a vector of PLIST objects as input.} & Test that the remove method remove the 'key' from all PLIST objects
in the vector. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output is the same as the shape of the input
2) Check that the output PLIST doesn't contains the key. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the remove method works with a matrix of PLIST objects as input.} & Test that the remove method remove the 'key' from all PLIST objects
in the matrix. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output is the same as the shape of the input
2) Check that the output PLIST doesn't contains the key. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the remove method works with a list of PLIST objects as input.} & Test that the remove method remove the 'key' from all PLIST objects
of the input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output is the same as the shape of the input
2) Check that the output PLIST doesn't contains the key. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the remove method works with a mix of different shaped PLIST
objects as input.} & Test that the remove method remove the 'key' from all PLIST objects
of the input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output is the same as the shape of the input
2) Check that the output PLIST doesn't contains the key. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the remove method applies the modify command} & Test that the remove method can modify the input PLIST by calling with no
output and that the method doesn't change the input of the function
notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'pleq' are now different.
2) Check that 'plmo' and 'out' are the same.
3) Check that 'out' and 'plmo' don't have the key
4) Check that pleq doesn't have the key & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the remove method that it removes the parameter which is defined
as an index or as a key} & Test the remove method that it removes the parameter which is defined
as an index or as a key & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the remove method in a negative case that the key is not in the
paramter list.} & The remove method doesn't throwns an error if the key doesn't exist
in the parameter list. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for plist/remove.}
\label{tab:plist_remove}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/save} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the save method works with a vector of PLIST objects as input.} & Test that the save method works for a vector of PLIST objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'plv'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the save method works with a matrix of PLIST objects as input.} & Test that the save method works for a matrix of PLIST objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'plm'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the save method works with a list of PLIST objects as input.} & Test that the save method works for a list of PLIST objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in the list
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the save method works with a mix of different shaped PLIST objects
as input.} & Test that the save method works with an input of matrices and vectors
and single PLIST objects. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output PLIST object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the save method works with the modify command.} & Use the save method with the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input PLIST object.
2) Check the output against the input except. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the save method uses the filename which is stored in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for plist/save.}
\label{tab:plist_save}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/setName} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setName method works with a vector of PLIST objects as input.} & Test that the setName method works for a vector of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'plv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setName method works with a matrix of PLIST objects as input.} & Test that the setName method works for a matrix of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'plm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setName method works with a list of PLIST objects as input.} & Test that the setName method works for a list of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setName method works with a mix of different shaped PLIST
objects as input.} & Test that the setName method works with an input of matrices and vectors
and single PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setName method can modify the input PLIST object.} & Test that the setName method can modify the input PLIST object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'pl2' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setName method can set the property with a plist.} & Test that the setName method can modify the property 'name'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Check that the setName method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects & pass \\ \hline
\caption{Unit tests for plist/setName.}
\label{tab:plist_setName}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf plist/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the string method works with a vector of PLIST objects as input.} & Test that the string method works for a vector of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the string method works with a matrix of PLIST objects as input.} & Test that the string method works for a matrix of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the string method works with a list of PLIST objects as input.} & Test that the string method works for a list of PLIST objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the string method works with a mix of different shaped PLIST objects
as input.} & Test that the string method works with an input of matrices and vectors
and single PLIST objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the string method doesn't work if the PLIST object have more
than one history step.} & The method string throws an error because the input object have more than
one history step. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the string method accepts different objects for the 'val' property.} & Create a plist with all possible objects for the 'val' property. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string & pass \\ \hline
\caption{Unit tests for plist/string.}
\label{tab:plist_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of PZMODEL objects as input.} & Test that the char method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of PZMODEL objects as input.} & Test that the char method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of PZMODEL objects as input.} & Test that the char method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped PZMODEL objects
as input.} & Test that the char method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the char method properly applies history.} & The method char doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for pzmodel/char.}
\label{tab:pzmodel_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for pzmodel/copy.}
\label{tab:pzmodel_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/created} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the created method works with a vector of PZMODEL objects as
input.} & Test that the created method works for a vector of PZMODEL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the created method works with a matrix of PZMODEL objects as
input.} & Test that the created method works for a matrix of PZMODEL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the created method works with a list of PZMODEL objects as
input.} & Test that the created method works for a list of PZMODEL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the created method works with a mix of different shaped
PZMODEL objects as input.} & Test that the created method works with an input of matrices and
vectors and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the created method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the created method can be used with the modify command.} & Tests that the created method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the created method retruns always a well defined time object
even for an empty input object.} & Test that the created method with an empty 'PZMODEL object & pass \\ \cline{3-4}
        &    & 1) Check that the output is a time object with a ell defined time. & pass \\ \hline
\caption{Unit tests for pzmodel/created.}
\label{tab:pzmodel_created}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/creator} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the creator method works with a vector of PZMODEL objects as
input.} & Test that the creator method works for a vector of PZMODEL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the creator method works with a matrix of PZMODEL objects as
input.} & Test that the creator method works for a matrix of PZMODEL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the creator method works with a list of PZMODEL objects as
input.} & The creator method doesn't work for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the creator method works with a mix of different shaped
PZMODEL objects as input.} & The creator method doesn't work with different shaped input objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the creator method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the creator method can be used with the modify command.} & Tests that the creator method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the creator method retruns all creator(s)/modifier(s) which
are in the history.} & Test that the creator method uses the option 'all' direct or in a
plist. The test file must have the modifier 'first', 'second' and
'third' & pass \\ \cline{3-4}
        &    & 1) Check that out1 contains only one creator
2) Check that out2 contain more creator/modifier & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests the negative case for the option 'all'.} & Test that the creator method throws an error if the option 'all' is
used in connection with a matrix/vector of PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for pzmodel/creator.}
\label{tab:pzmodel_creator}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of PZMODEL objects as input.} & Test that the display method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of PZMODEL objects as input.} & Test that the display method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of PZMODEL objects as input.} & Test that the display method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped
PZMODEL objects as input.} & Test that the display method works with an input of matrices and vectors
and single PZMODEL objects as. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the display method properly applies history.} & The method display doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for pzmodel/display.}
\label{tab:pzmodel_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/eq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eq method works with a vector of PZMODEL objects as input.} & Test that the eq method works for a vector of PZMODEL objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eq method works with a matrix of PZMODEL objects as input.} & Test that the eq method works for a matrix of PZMODEL objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eq method works with a list of PZMODEL objects as input.} & The eq method doesn't works for a list of PZMODEL objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eq method works with a mix of different shaped PZMODEL objects
as input.} & The eq method doesn't works for a list of PZMODEL objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the eq method properly applies history.} & The eq method doesn't change the PZMODEL object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because pzm is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'iunits'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because pzm is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'ounits'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because pzm is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the eq method with an exception list which is in a plist.} & Test that the eq method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for pzmodel/eq.}
\label{tab:pzmodel_eq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/get} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the get method of the pzmodel class.} & Test that the get returns returns the value of the specified
property. Do this for all properties of the PZMODEL object. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the get method works with a plist.} & Test that the get returns returns the value of the specified
property which is defined in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests the get method of the pzmodel class.} & Test that the get throws an error if the input are more than
one PZMODEL object. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for pzmodel/get.}
\label{tab:pzmodel_get}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/getlowerFreq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the getlowerFreq method of the pzmodel class.} & Test that the getlowerFreq returns the lowest frequence of the lowest
pole or zero in the model. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests the getlowerFreq method of the pzmodel class.} & Test that the getlowerFreq throws an error if the input are more than one
pzmodel. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for pzmodel/getlowerFreq.}
\label{tab:pzmodel_getlowerFreq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/getupperFreq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the getupperFreq method of the pzmodel class.} & Test that the getupperFreq returns the lowest frequence of the lowest
pole or zero in the model. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests the getupperFreq method of the pzmodel class.} & Test that the getupperFreq throws an error if the input are more than one
pzmodel. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for pzmodel/getupperFreq.}
\label{tab:pzmodel_getupperFreq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/index} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the index method works with a vector of PZMODEL objects as
input.} & Test that the index method works for a vector of PZMODEL objects as
input. The following indexing should work:
I = [ 1 2 3 ] or (I/J) = [(1,1), (1,2), (1,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the index method works with a matrix of PZMODEL objects as
input.} & Test that the index method works for a matrix of PZMODEL objects as
input. The following indexing should work:
I = [ 1 3 5 ] or (I/J) = [(1,1), (1,2), (1,3)]
[ 2 4 6 ]            [(2,1), (2,2), (2,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the index method works with a list of PZMODEL objects as
input.} & The index method doesn't work for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the index method properly applies history.} & Test that the result of index have an additional history step. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds
to 'index'. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the index method works for the modifier command.} & Tests that the index method works for the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the index method can be controled with a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the index method selects more objects if I have more indices.} & Test that the index method selects more objects if I have more indices. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
\caption{Unit tests for pzmodel/index.}
\label{tab:pzmodel_index}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/isprop} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isprop method works with a vector of PZMODEL objects as input.} & Test that the isprop method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isprop method works with a matrix of PZMODEL objects as input.} & Test that the isprop method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isprop method works with a list of PZMODEL objects as input.} & Test that the isprop method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isprop method works with a mix of different shaped
PZMODEL objects as input.} & Test that the isprop method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isprop method properly applies history.} & The method isprop doesn't change the object, thus it is not necessary to
apply history. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the isprop method works for each property.} & Test that the isprop method works for the properties:
'gain', 'poles', 'zeros', 'iunits', 'ounits', 'hist',
'name' & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the negative case and the not function command.} & Test that the isprop method retrun false for a unknown property and for
methods of the object. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for pzmodel/isprop.}
\label{tab:pzmodel_isprop}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for pzmodel/loadobj.}
\label{tab:pzmodel_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/mrdivide} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the mrdivide method works with a vector of PZMODELs as input.} & Test that the mrdivide method works for a vector of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the mrdivide method works with a matrix of PZMODELs as input.} & Tests that the rdivie method works with a matrix of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the mrdivide method works with a list of PZMODELs as input.} & Tests that the mrdivide method works with a list of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the mrdivide method works with a mix of different shaped
PZMODELs as input.} & Tests that the mrdivide method works with a mix of different shaped
PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output
5) Check the rebuilt object & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the mrdivide method properly applies history.} & Test that the result of applying the mrdivide method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'mrdivide'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the mrdivide method only divide PZMODELs with the same output
units.} & Check that the mrdivide method only divide PZMODELs with the same
output units. Check also the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the I-/O-units & pass \\ \hline
\caption{Unit tests for pzmodel/mrdivide.}
\label{tab:pzmodel_mrdivide}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/mtimes} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the mtimes method works with a vector of PZMODELs as input.} & Test that the mtimes method works for a vector of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the mtimes method works with a matrix of PZMODELs as input.} & Tests that the mtimes method works with a matrix of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the mtimes method works with a list of PZMODELs as input.} & Tests that the mtimes method works with a list of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the mtimes method works with a mix of different shaped
PZMODELs as input.} & Tests that the mtimes method works with a mix of different shaped
PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output
5) Check the rebuilt object & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the mtimes method properly applies history.} & Test that the result of applying the mtimes method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'times'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the mtimes method only multiply PZMODELs with the same output
units.} & Check that the mtimes method only multiply PZMODELs with the same
output units. Check also the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the I-/O-units & pass \\ \hline
\caption{Unit tests for pzmodel/mtimes.}
\label{tab:pzmodel_mtimes}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/ne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ne method works with a vector of PZMODEL objects as input.} & Test that the ne method works for a vector of PZMODEL objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ne method works with a matrix of PZMODEL objects as input.} & Test that the ne method works for a matrix of PZMODEL objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ne method works with a list of PZMODEL objects as input.} & The ne method doesn't works for a list of PZMODEL objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ne method works with a mix of different shaped PZMODEL objects
as input.} & The ne method doesn't works for a list of PZMODEL objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ne method properly applies history.} & The ne method doesn't change the PZMODEL object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the ne method with an exception list.
The function pzmodel/ne use the function pzmodel/eq so it is not necessary to check
all possibilities of the exception list.} & Test the ne method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because pzm is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the ne method with an exception list which is in a plist.} & Test that the ne method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for pzmodel/ne.}
\label{tab:pzmodel_ne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/pzmodel} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the pzmodel method works with a vector of PZMODEL objects as input.} & Test that the pzmodel method works with a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output PZMODELs is the same as the input shape.
2) Check that each output PZMODEL is a copy of the input PZMODEL.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the pzmodel method works with a matrix of PZMODEL objects as input.} & Test that the pzmodel method works with a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output PZMODELs is the same as the input shape.
2) Check that each output PZMODEL is a copy of the input PZMODEL.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the pzmodel method works with a list of PZMODEL objects as input.} & Test that the pzmodel method works with a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output PZMODEL is a copy of the input PZMODEL.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the pzmodel method works with a mix of different shaped PZMODELs as
input.} & Test that the pzmodel method works with a mix of different shaped PZMODELs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output PZMODEL is a copy of the input PZMODEL.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the pzmodel method properly applies history.} & Test that the result of applying the pzmodel method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the pzmodel method properly applies history to the copy constructor.} & Test that the output can be processed back with the 'rebuild' method.
Test the constructor with a different number of inputs. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the original objects are not changed by the setter function
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the pzmodel method properly applies history to the read
MAT-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the loaded object is the same as the saved object.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the pzmodel method properly applies history to the read
XML-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the loaded object is the same as the saved object.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the pzmodel method properly applies history to the read
FIL-file constructor.} & Read the FIL file which is created from LISO.
Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Tests that the pzmodel method properly applies history to the struct constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the pzmodel from a constant properly applies history.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the pzmodel method properly applies history to the rational constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the pzmodel method properly applies history to the
plist(filename) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests that the PZMODEL method properly applies history to the
plist(conn) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests that the PZMODEL method properly applies history to the
plist(rational) constructor} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check the algorithm
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests that the PZMODEL method properly applies history to the
plist(gain|poles|zeros) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests that the PZMODEL method properly applies history to the
plist(<plist-object>) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests that the PZMODEL method properly applies history to the conn+Id constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests that the PZMODEL method properly applies history to the
gain + poles + zeros constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests that the PZMODEL method properly applies history to the
gain + poles + zeros + name constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{22 } & \multirow{2}{5cm}{Tests that the PZMODEL method properly applies history to the
gain + poles + zeros + iunits + ounits constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'pzmodel'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/pzmodel.}
\label{tab:pzmodel_pzmodel}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/rdivide} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rdivide method works with a vector of PZMODELs as input.} & Test that the rdivide method works for a vector of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rdivide method works with a matrix of PZMODELs as input.} & Tests that the rdivie method works with a matrix of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rdivide method works with a list of PZMODELs as input.} & Tests that the rdivide method works with a list of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rdivide method works with a mix of different shaped
PZMODELs as input.} & Tests that the rdivide method works with a mix of different shaped
PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output
5) Check the rebuilt object & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rdivide method properly applies history.} & Test that the result of applying the rdivide method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rdivide'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the rdivide method only divide PZMODELs with the same output
units.} & Check that the rdivide method only divide PZMODELs with the same
output units. Check also the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the I-/O-units & pass \\ \hline
\caption{Unit tests for pzmodel/rdivide.}
\label{tab:pzmodel_rdivide}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/rebuild} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rebuild method works with a vector of PZMODEL objects as input.} & Test that the rebuild method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rebuild method works with a matrix of PZMODEL objects as input.} & Test that the rebuild method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rebuild method works with a list of PZMODEL objects as input.} & Test that the rebuild method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rebuild method works with a mix of different shaped PZMODEL objects
as input.} & Test that the rebuild method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rebuild method properly applies history.} & The method rebuild doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the rebuild method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/rebuild.}
\label{tab:pzmodel_rebuild}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/resp} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the resp method works with a vector of PZMODEL objects as input.} & Test that the resp method works for a vector of PZMODEL objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'pzv'
3) Check that each output PZMODEL contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the resp method works with a matrix of PZMODEL objects as input.} & Test that the resp method works for a matrix of PZMODEL objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'pzmat'
3) Check that each output PZMODEL contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the pzmat method works with a list of PZMODEL objects as input.} & Test that the resp method works for a list of PZMODEL objects as input.
Test the method with an output and with no output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'pzmat'
3) Check that each output PZMODEL contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the resp method works with a mix of different shaped PZMODEL
objects as input.} & Test that the resp method works with an input of matrices and vectors
and single PZMODEL objects. Test the method with an output and with no
output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'pzmat'
3) Check that each output PZMODEL contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the resp method properly applies history.} & Test that the result of applying the resp method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'resp'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that modify command plots the response into a diagram.} & Tests that modify command plots the response into a diagram. & pass \\ \cline{3-4}
        &    & 1) Check the response diagram. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the output AO of the resp method keeps the shape of the used
input f vector. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the resp method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the resp method uses the x-data of an input AO for f-vector.} & Call the method with different method to pass an AO in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the resp method uses the specified f-vector to compute the response.} & Call the method with different method to pass an f-vector in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/resp.}
\label{tab:pzmodel_resp}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/save} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the save method works with a vector of PZMODEL objects as input.} & Test that the save method works for a vector of PZMODEL objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'pzv'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the save method works with a matrix of PZMODEL objects as input.} & Test that the save method works for a matrix of PZMODEL objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'pzm'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the save method works with a list of PZMODEL objects as input.} & Test that the save method works for a list of PZMODEL objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in the list
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the save method works with a mix of different shaped PZMODEL objects
as input.} & Test that the save method works with an input of matrices and vectors
and single PZMODEL objects. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output PZMODEL object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the save method properly applies history.} & Test that the result of applying the save method can be processed back
to an m-file. Do this for both extensions 'mat' and 'xml' & pass \\ \cline{3-4}
        &    & 1) Check that the history applies to the output object. Check that
save doesn't add a history step to the input object.
2) Check that the read object doesn't contain the save + load history steps.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the save method works with the modify command.} & Use the save method with the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't apply the history.
2) Check the output against the input.
3) Check the history of the output against the input. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the save method uses the filename which is stored in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the save method with common PZMODEL objects.} & Save all common PZMODEL objects with both extensions. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for pzmodel/save.}
\label{tab:pzmodel_save}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/setDelay} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setDelay method works with a vector of PZMODEL objects as input.} & Test that the setDelay method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setDelay method works with a matrix of PZMODEL objects as input.} & Test that the setDelay method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setDelay method works with a list of PZMODEL objects as input.} & Test that the setDelay method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setDelay method works with a mix of different shaped PZMODEL
objects as input.} & Test that the setDelay method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setDelay method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setDelay method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setDelay'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setDelay'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setDelay method can modify the input PZMODEL object.} & Test that the setDelay method can modify the input PZMODEL object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'pz5' and 'ain' are now different.
2) Check that 'ain' has the correct delay field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setDelay method can set the property with a plist.} & Test that the setDelay method can modify the property 'delay'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct delay field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setDelay method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/setDelay.}
\label{tab:pzmodel_setDelay}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/setIunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setIunits method works with a vector of PZMODEL objects as input.} & Test that the setIunits method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setIunits method works with a matrix of PZMODEL objects as input.} & Test that the setIunits method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setIunits method works with a list of PZMODEL objects as input.} & Test that the setIunits method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setIunits method works with a mix of different shaped PZMODEL
objects as input.} & Test that the setIunits method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setIunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setIunits method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setIunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setIunits'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setIunits method can modify the input PZMODEL object.} & Test that the setIunits method can modify the input PZMODEL object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'pz5' and 'ain' are now different.
2) Check that 'ain' has the correct iunits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setIunits method can set the property with a plist.} & Test that the setIunits method can modify the property 'iunits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct iunits field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setIunits method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/setIunits.}
\label{tab:pzmodel_setIunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/setName} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setName method works with a vector of PZMODEL objects as input.} & Test that the setName method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setName method works with a matrix of PZMODEL objects as input.} & Test that the setName method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setName method works with a list of PZMODEL objects as input.} & Test that the setName method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setName method works with a mix of different shaped PZMODEL
objects as input.} & Test that the setName method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setName method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setName method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setName'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setName'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setName method can modify the input PZMODEL object.} & Test that the setName method can modify the input PZMODEL object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'pz5' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setName method can set the property with a plist.} & Test that the setName method can modify the property 'name'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setName method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/setName.}
\label{tab:pzmodel_setName}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/setOunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setOunits method works with a vector of PZMODEL objects as input.} & Test that the setOunits method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setOunits method works with a matrix of PZMODEL objects as input.} & Test that the setOunits method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setOunits method works with a list of PZMODEL objects as input.} & Test that the setOunits method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setOunits method works with a mix of different shaped PZMODEL
objects as input.} & Test that the setOunits method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setOunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setOunits method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setOunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setOunits'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setOunits method can modify the input PZMODEL object.} & Test that the setOunits method can modify the input PZMODEL object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'pz5' and 'ain' are now different.
2) Check that 'ain' has the correct ounits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setOunits method can set the property with a plist.} & Test that the setOunits method can modify the property 'ounits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct ounits field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setOunits method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/setOunits.}
\label{tab:pzmodel_setOunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/simplify} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the simplify method works with a vector of PZMODELs as input.} & Test that the simplify method works for a vector of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check the poles of the output
3) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the simplify method works with a matrix of PZMODELs as input.} & Tests that the simplify method works with a matrix of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check the poles of the output
3) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the simplify method works with a list of PZMODELs as input.} & Tests that the simplify method works with a list of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input
2) Check the poles of the output
3) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the simplify method works with a mix of different shaped
PZMODELs as input.} & Tests that the simplify method works with a mix of different shaped
PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in the input
2) Check the poles of the output
3) Check the zeros of the output
4) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the simplify method properly applies history.} & Test that the result of applying the simplify method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'simplify'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the simplify method can modify the input PZMODEL.} & Test that the simplify method can modify the input PZMODEL by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that 'out' and 'aeq' are now different.
2) Check that 'aeq' is not changed
3) Check that the modified input is the simplified value of the copy
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Check that the simplify method cancle poles/zeros at different
positions.} & Check that the simplify method cancle poles/zeros at different
positions. & pass \\ \cline{3-4}
        &    & 1) Check the poles and peros of the output. & pass \\ \hline
\caption{Unit tests for pzmodel/simplify.}
\label{tab:pzmodel_simplify}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the string method works with a vector of PZMODEL objects as input.} & Test that the string method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the string method works with a matrix of PZMODEL objects as input.} & Test that the string method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the string method works with a list of PZMODEL objects as input.} & Test that the string method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the string method works with a mix of different shaped PZMODEL objects
as input.} & Test that the string method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the string method properly applies history.} & The method string doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the string method doesn't work if the PZMODEL object have more
than one history step.} & The method string throws an error because the input object have more than
one history step. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for pzmodel/string.}
\label{tab:pzmodel_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/times} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the times method works with a vector of PZMODELs as input.} & Test that the times method works for a vector of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the times method works with a matrix of PZMODELs as input.} & Tests that the times method works with a matrix of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the times method works with a list of PZMODELs as input.} & Tests that the times method works with a list of PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the times method works with a mix of different shaped
PZMODELs as input.} & Tests that the times method works with a mix of different shaped
PZMODELs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is exact one PZMODEL object.
2) Check the gain of the output
3) Check the poles of the output
4) Check the zeros of the output
5) Check the rebuilt object & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the times method properly applies history.} & Test that the result of applying the times method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'times'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the times method only multiply PZMODELs with the same output
units.} & Check that the times method only multiply PZMODELs with the same
output units. Check also the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the I-/O-units & pass \\ \hline
\caption{Unit tests for pzmodel/times.}
\label{tab:pzmodel_times}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/tomfir} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the tomfir method works with a vector of PZMODEL objects as input.} & Test that the tomfir method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv'
2) Check that each output PZMODEL object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the tomfir method works with a matrix of PZMODEL objects as input.} & Test that the tomfir method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm'
2) Check that each output PZMODEL object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the tomfir method works with a list of PZMODEL objects as input.} & Test that the tomfir method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output PZMODEL object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the tomfir method works with a mix of different shaped PZMODEL objects as
input.} & Test that the tomfir method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output PZMODEL object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the tomfir method properly applies history.} & Test that the result of applying the tomfir method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'tomfir'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the tomfir method can modify the input PZMODEL object.} & Test that the tomfir method can not modify the input PZMODEL object .
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the tomfir method use the different values in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the tomfir method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/tomfir.}
\label{tab:pzmodel_tomfir}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/tomiir} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the tomiir method works with a vector of PZMODEL objects as input.} & Test that the tomiir method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzv' & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the tomiir method works with a matrix of PZMODEL objects as input.} & Test that the tomiir method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'pzm' & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the tomiir method works with a list of PZMODEL objects as input.} & Test that the tomiir method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output PZMODEL object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the tomiir method works with a mix of different shaped PZMODEL objects as
input.} & Test that the tomiir method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output PZMODEL object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the tomiir method properly applies history.} & Test that the result of applying the tomiir method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'tomiir'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the tomiir method can modify the input PZMODEL object.} & Test that the tomiir method can not modify the input PZMODEL object .
The method must throw an error for the modifier call. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the tomiir method use the different values in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check the re-built object & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the tomiir method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check indirect the protected 'pzm2ab' method because tomiir uses this
method to get the a and b of the iir object.} & Create some special pole/zero models to test the 'pzm2ab' method
indirect with the tomiir method. Test with complex pole/zero pairs.
This UTP define a simple method to get the a-, and b-value from a
complex pole/zero pair.
It uses the following code:
function [a,b] = utp\_cpz2ab(pf, pq, zf, zq, fs)
wp = pf*2*pi;
wp2 = wp\^2;
wz = zf*2*pi;
wz2 = wz\^2;
k = 4*fs*fs + 2*wp*fs/pq + wp2;
a(1) = (4*fs*fs + 2*wz*fs/zq + wz2)/k;
a(2) = (2*wz2 - 8*fs*fs)/k;
a(3) = (4*fs*fs - 2*wz*fs/zq + wz2)/k;
b(1) = 1;
b(2) = (2*wp2 - 8*fs*fs)/k;
b(3) = (wp2 + 4*fs*fs - 2*wp*fs/pq)/k;
g = sum(a) / sum(b);
a = a / g;
end & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check indirect the protected 'pzm2ab' method because tomiir uses this
method to get the a and b of the iir object.} & Create some special pole/zero models to test the 'pzm2ab' method indirect
with the tomiir method. Test with complex poles.
This UTPs define a simple method to get the a-, and b-value from a
complex pole. It uses the following code:
function [a,b] = utp\_cp2iir(pf, pq, fs)
w0  = pf*2*pi;
w02 = w0\^2;
k    = (pq*w02 + 4*pq*fs*fs + 2*w0*fs) / (pq*w02);
b(1) =  1;
b(2) = (2*w02-8*fs*fs) / (k*w02);
b(3) = (pq*w02 + 4*pq*fs*fs - 2*w0*fs) / (k*pq*w02);
a(1) =  1/k;
a(2) = -2/k;
a(3) = -1/k;
a    =  a*-2;
end & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check indirect the protected 'pzm2ab' method because tomiir uses this
method to get the a and b of the iir object.} & Create some special pole/zero models to test the 'pzm2ab' method indirect
with the tomiir method. Test with complex zeros.
This UTPs define a simple method to get the a-, and b-value from a
complex zero. It uses the following code:
function [a,b] = utp\_cz2iir(zf, zq, fs)
w0  = zf*2*pi;
w02 = w0\^2;
a(1) = (-zq*w02/2 - 2*zq*fs*fs - w0*fs) / (zq*w02);
a(2) = (-w02+4*fs*fs) / w02;
a(3) = (-zq*w02/2 - 2*zq*fs*fs + w0*fs) / (zq*w02);
b(1) =  1;
b(2) = -2;
b(3) = -1;
end & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check indirect the protected 'pzm2ab' method because tomiir uses this
method to get the a and b of the iir object.} & Create some special pole/zero models to test the 'pzm2ab' method indirect
with the tomiir method. Test with real poles.
This UTPs define a simple method to get the a-, and b-value from a
real pole. It uses the following code:
function [a,b] = utp\_rp2iir(pf, fs)
w0 = pf*2*pi;
a(1) = w0 / (2*fs + w0);
a(2) = a(1);
b(1) = 1;
b(2) = (w0-2*fs) / (w0+2*fs);
end & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Check indirect the protected 'pzm2ab' method because tomiir uses this
method to get the a and b of the iir object.} & Create some special pole/zero models to test the 'pzm2ab' method indirect
with the tomiir method. Test with real zeros.
This UTPs define a simple method to get the a-, and b-value from a
real zero. It uses the following code:
function [a,b] = utp\_rp2iir(zf, fs)
w0 = zf*2*pi;
a(1) = (2*fs + w0) / w0;
a(2) = (-2*fs + w0) / w0;
b(1) = 1;
b(2) = 1;
end & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for pzmodel/tomiir.}
\label{tab:pzmodel_tomiir}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf pzmodel/type} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the type method works with a vector of PZMODEL objects as input.} & Test that the type method works for a vector of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the type method works with a matrix of PZMODEL objects as input.} & Test that the type method works for a matrix of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the type method works with a list of PZMODEL objects as input.} & Test that the type method works for a list of PZMODEL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the type method works with a mix of different shaped PZMODEL objects
as input.} & Test that the type method works with an input of matrices and vectors
and single PZMODEL objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the type method properly applies history.} & The method type doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for pzmodel/type.}
\label{tab:pzmodel_type}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of RATIONAL objects as input.} & Test that the char method works for a vector of RATIONAL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of RATIONAL objects as input.} & Test that the char method works for a matrix of RATIONAL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of RATIONAL objects as input.} & Test that the char method works for a list of RATIONAL objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped RATIONAL objects
as input.} & Test that the char method works with an input of matrices and vectors
and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the char method properly applies history.} & The method char doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for rational/char.}
\label{tab:rational_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for rational/copy.}
\label{tab:rational_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/created} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the created method works with a vector of RATIONAL objects as
input.} & Test that the created method works for a vector of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'rav'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the created method works with a matrix of RATIONAL objects as
input.} & Test that the created method works for a matrix of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'ram'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the created method works with a list of RATIONAL objects as
input.} & Test that the created method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the created method works with a mix of different shaped
RATIONAL objects as input.} & Test that the created method works with an input of matrices and
vectors and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the created method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the created method can be used with the modify command.} & Tests that the created method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the created method retruns always a well defined time object
even for an empty input object.} & Test that the created method with an empty 'RATIONAL object & pass \\ \cline{3-4}
        &    & 1) Check that the output is a time object with a ell defined time. & pass \\ \hline
\caption{Unit tests for rational/created.}
\label{tab:rational_created}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/creator} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the creator method works with a vector of RATIONAL objects as
input.} & Test that the creator method works for a vector of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'rav'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the creator method works with a matrix of RATIONAL objects as
input.} & Test that the creator method works for a matrix of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'ram'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the creator method works with a list of RATIONAL objects as
input.} & The creator method doesn't work for a list of RATIONAL objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the creator method works with a mix of different shaped
RATIONAL objects as input.} & The creator method doesn't work with different shaped input objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the creator method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the creator method can be used with the modify command.} & Tests that the creator method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the creator method retruns all creator(s)/modifier(s) which
are in the history.} & Test that the creator method uses the option 'all' direct or in a
plist. The test file must have the modifier 'first', 'second' and
'third' & pass \\ \cline{3-4}
        &    & 1) Check that out1 contains only one creator
2) Check that out2 contain more creator/modifier & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests the negative case for the option 'all'.} & Test that the creator method throws an error if the option 'all' is
used in connection with a matrix/vector of RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for rational/creator.}
\label{tab:rational_creator}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of RATIONAL objects
as input.} & Test that the display method works for a vector of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of RATIONAL objects
as input.} & Test that the display method works for a matrix of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of RATIONAL objects as
input.} & Test that the display method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped
RATIONAL objects as input.} & Test that the display method works with an input of matrices and
vectors and single RATIONAL objects as. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the display method properly applies history.} & The method display doesn't change the data, thus it is not possible
to check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for rational/display.}
\label{tab:rational_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/eq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eq method works with a vector of RATIONAL objects as input.} & Test that the eq method works for a vector of RATIONAL objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eq method works with a matrix of RATIONAL objects as input.} & Test that the eq method works for a matrix of RATIONAL objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eq method works with a list of RATIONAL objects as input.} & The eq method doesn't works for a list of RATIONAL objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eq method works with a mix of different shaped RATIONAL objects
as input.} & The eq method doesn't works for a list of RATIONAL objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the eq method properly applies history.} & The eq method doesn't change the RATIONAL object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception
list with properties where a public set method exist.} & Test the eq method with the exception 'name'. Use the option
'internal' to suppress the history. It is necessary to add 'created'
to the exception list because 'pa' is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'iunits'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because 'pa' is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception
list with properties where a public set method exist.} & Test the eq method with the exception 'ounits'. Use the option
'internal' to suppress the history. It is necessary to add 'created'
to the exception list because 'pa' is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Test the eq method with an exception list which is in a plist.} & Test that the eq method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for rational/eq.}
\label{tab:rational_eq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/get} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the get method of the rational class.} & Test that the get returns returns the value of the specified
property. Do this for all properties of the RATIONAL object. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the get method works with a plist.} & Test that the get returns returns the value of the specified
property which is defined in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests the get method of the rational class.} & Test that the get throws an error if the input are more than
one RATIONAL object. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for rational/get.}
\label{tab:rational_get}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/getlowerFreq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the getlowerFreq method of the rational class.} & Test that the getlowerFreq returns the lowest frequence of the pole
in the rational object. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests the getlowerFreq method of the rational class.} & Test that the getlowerFreq throws an error if the input are more than
one rational. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for rational/getlowerFreq.}
\label{tab:rational_getlowerFreq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/getupperFreq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the getupperFreq method of the rational class.} & Test that the getupperFreq returns the lowest frequence in the
rational object. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests the getupperFreq method of the rational class.} & Test that the getupperFreq throws an error if the input are more than
one rational. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for rational/getupperFreq.}
\label{tab:rational_getupperFreq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/index} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the index method works with a vector of RATIONAL objects as
input.} & Test that the index method works for a vector of RATIONAL objects as
input. The following indexing should work:
I = [ 1 2 3 ] or (I/J) = [(1,1), (1,2), (1,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the index method works with a matrix of RATIONAL objects as
input.} & Test that the index method works for a matrix of RATIONAL objects as
input. The following indexing should work:
I = [ 1 3 5 ] or (I/J) = [(1,1), (1,2), (1,3)]
[ 2 4 6 ]            [(2,1), (2,2), (2,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the index method works with a list of RATIONAL objects as
input.} & The index method doesn't work for a list of RATIONAL objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the index method properly applies history.} & Test that the result of index have an additional history step. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds
to 'index'. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the index method works for the modifier command.} & Tests that the index method works for the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the index method can be controled with a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the index method selects more objects if I have more indices.} & Test that the index method selects more objects if I have more indices. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
\caption{Unit tests for rational/index.}
\label{tab:rational_index}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/isprop} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isprop method works with a vector of RATIONAL objects as
input.} & Test that the isprop method works for a vector of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'rav'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isprop method works with a matrix of RATIONAL objects as
input.} & Test that the isprop method works for a matrix of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'ram'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isprop method works with a list of RATIONAL objects as
input.} & Test that the isprop method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isprop method works with a mix of different shaped
RATIONAL objects as input.} & Test that the isprop method works with an input of matrices and
vectors and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isprop method properly applies history.} & The method isprop doesn't change the object, thus it is not necessary
to apply history. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the isprop method works for each property.} & Test that the isprop method works for the properties:
'num', 'den', 'iunits', 'ounits', 'hist', 'name' & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the negative case and the not function command.} & Test that the isprop method retrun false for a unknown property and
for methods of the object. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for rational/isprop.}
\label{tab:rational_isprop}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for rational/loadobj.}
\label{tab:rational_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/ne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ne method works with a vector of RATIONAL objects as input.} & Test that the ne method works for a vector of RATIONAL objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ne method works with a matrix of RATIONAL objects as input.} & Test that the ne method works for a matrix of RATIONAL objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ne method works with a list of RATIONAL objects as input.} & The ne method doesn't works for a list of RATIONAL objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ne method works with a mix of different shaped RATIONAL
objects as input.} & The ne method doesn't works for a list of RATIONAL objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ne method properly applies history.} & The ne method doesn't change the RATIONAL object, thus will no history
added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the ne method with an exception list.
The function rational/ne use the function rational/eq so it is not
necessary to check all possibilities of the exception list.} & Test the ne method with the exception 'name'. Use the option
'internal' to suppress the history. It is necessary to add 'created'
to the exception list because ra is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the ne method with an exception list which is in a plist.} & Test that the ne method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for rational/ne.}
\label{tab:rational_ne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/rational} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rational method works with a vector of RATIONAL objects
as input.} & Test that the rational method works with a vector of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output RATIONALs is the same as the
input shape.
2) Check that each output RATIONAL is a copy of the input RATIONAL.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rational method works with a matrix of RATIONAL objects
as input.} & Test that the rational method works with a matrix of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output RATIONALs is the same as the
input shape.
2) Check that each output RATIONAL is a copy of the input RATIONAL.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rational method works with a list of RATIONAL objects as
input.} & Test that the rational method works with a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output RATIONAL is a copy of the input RATIONAL.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rational method works with a mix of different shaped
RATIONALs as input.} & Test that the rational method works with a mix of different shaped
RATIONALs as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output RATIONAL is a copy of the input RATIONAL.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rational method properly applies history.} & Test that the result of applying the rational method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the rational method properly applies history to the copy
constructor.} & Test that the output can be processed back with the 'rebuild' method.
Test the constructor with a different number of inputs. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the original objects are not changed by the setter
function
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the rational method properly applies history to the read
MAT-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the rational method properly applies history to the read
XML-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the rational method properly doesn't apply history to the
struct constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Tests that the rational method properly applies history to the parfrac
constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the rational method properly applies history to the pzmodel
constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the rational method properly applies history to the
plist(filename) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the last two entries in the history of 'out'
doesn't corresponds to 'rational' and 'save'
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{14 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the
plist(conn) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the
plist(den || num) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the
plist(pzmodel) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the
plist(rational) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{18 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the
plist(<plist-object>) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{19 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the conn+Id
constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{20 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the
num + den object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{21 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the
num + den + name object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{22 } & \multirow{2}{5cm}{Tests that the RATIONAL method properly applies history to the
num + den + name + iunits + ounits object constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'rational'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for rational/rational.}
\label{tab:rational_rational}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/rebuild} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rebuild method works with a vector of RATIONAL objects as
input.} & Test that the rebuild method works for a vector of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rebuild method works with a matrix of RATIONAL objects as
input.} & Test that the rebuild method works for a matrix of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rebuild method works with a list of RATIONAL objects as
input.} & Test that the rebuild method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rebuild method works with a mix of different shaped
RATIONAL objects as input.} & Test that the rebuild method works with an input of matrices and
vectors and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rebuild method properly applies history.} & The method rebuild doesn't change the data, thus it is not possible
to check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the rebuild method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for rational/rebuild.}
\label{tab:rational_rebuild}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/resp} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the resp method works with a vector of RATIONAL objects as
input.} & Test that the resp method works for a vector of RATIONAL objects as
input. Test the method with an output and with no output
(a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'rav'
3) Check that each output RATIONAL contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the resp method works with a matrix of RATIONAL objects as
input.} & Tests that the resp method works with a matrix of RATIONAL objects as
input. Test the method with an output and with no output
(a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'ram'
3) Check that each output RATIONAL contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the resp method works with a list of RATIONAL objects as
input.} & Tests that the resp method works with a list of RATIONAL objects as
input. Test the method with an output and with no output
(a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'rain'
3) Check that each output RATIONAL contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the resp method works with a mix of different shaped
RATIONAL objects as input.} & Tests that the resp method works with a mix of different shaped
RATIONAL objects as input. Test the method with an output and with no
output (a diagram must appear) & pass \\ \cline{3-4}
        &    & 1) Test the right number of lines in the diagram.
2) Check that the number of elements in 'out' is the same as in 'rain'
3) Check that each output RATIONAL contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the resp method properly applies history.} & Test that the result of applying the resp method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'resp'.
2) Check that re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that modify command plots the response into a diagram.} & Tests that modify command plots the response into a diagram. & pass \\ \cline{3-4}
        &    & 1) Check the response diagram. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the shape of the output.} & Test that the output AO of the resp method keeps the shape of the used
input f vector. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the data doesn't change. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the resp method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the resp method uses the x-data of an input AO for f-vector.} & Call the method with different method to pass an AO in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Check that the resp method uses the specified f-vector to compute the
response.} & Call the method with different method to pass an f-vector in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Check that the resp method uses the specified f1, f2, and nf to compute
the response.} & Call the method with different method to pass f1, f2, and nf in. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for rational/resp.}
\label{tab:rational_resp}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/save} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the save method works with a vector of RATIONAL objects as input.} & Test that the save method works for a vector of RATIONAL objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the
same as in 'rav'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the save method works with a matrix of RATIONAL objects as
input.} & Test that the save method works for a matrix of RATIONAL objects as
input. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the
same as in 'ram'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the save method works with a list of RATIONAL objects as input.} & Test that the save method works for a list of RATIONAL objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the
same as in the list
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the save method works with a mix of different shaped RATIONAL
objects as input.} & Test that the save method works with an input of matrices and vectors
and single RATIONAL objects. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output RATIONAL object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the save method properly applies history.} & Test that the result of applying the save method can be processed back
to an m-file. Do this for both extensions 'mat' and 'xml' & pass \\ \cline{3-4}
        &    & 1) Check that the history applies to the output object. Check that
save doesn't add a history step to the input object.
2) Check that the read object doesn't contain the save + load history steps.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the save method works with the modify command.} & Use the save method with the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't apply the history.
2) Check the output against the input. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the save method uses the filename which is stored in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the save method with different complex RATIONAL objects} & Test the save method with different complex RATIONAL objects & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for rational/save.}
\label{tab:rational_save}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/setIunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setIunits method works with a vector of RATIONAL objects
as input.} & Test that the setIunits method works for a vector of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'rav'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setIunits method works with a matrix of RATIONAL objects
as input.} & Test that the setIunits method works for a matrix of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'ram'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setIunits method works with a list of RATIONAL objects as
input.} & Test that the setIunits method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setIunits method works with a mix of different shaped
RATIONAL objects as input.} & Test that the setIunits method works with an input of matrices and
vectors and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setIunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setIunits method can be
processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setIunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setIunits'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setIunits method can modify the input RATIONAL object.} & Test that the setIunits method can modify the input RATIONAL object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'ra3' and 'ain' are now different.
2) Check that 'ain' has the correct iunits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setIunits method can set the property with a plist.} & Test that the setIunits method can modify the property 'iunits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct iunits field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setIunits method pass back the output objects to a list
of output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for rational/setIunits.}
\label{tab:rational_setIunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/setName} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setName method works with a vector of RATIONAL objects
as input.} & Test that the setName method works for a vector of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'rav'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setName method works with a matrix of RATIONAL objects
as input.} & Test that the setName method works for a matrix of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'ram'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setName method works with a list of RATIONAL objects as
input.} & Test that the setName method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setName method works with a mix of different shaped
RATIONAL objects as input.} & Test that the setName method works with an input of matrices and
vectors and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setName method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setName method can be processed
back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setName'.
2) Check that the last entry in the history of 'out2' NOT corresponds
to 'setName'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setName method can modify the input RATIONAL object.} & Test that the setName method can modify the input RATIONAL object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'ra3' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setName method can set the property with a plist.} & Test that the setName method can modify the property 'name'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setName method pass back the output objects to a list
of output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for rational/setName.}
\label{tab:rational_setName}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/setOunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setOunits method works with a vector of RATIONAL objects
as input.} & Test that the setOunits method works for a vector of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'rav'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setOunits method works with a matrix of RATIONAL objects
as input.} & Test that the setOunits method works for a matrix of RATIONAL objects
as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'ram'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setOunits method works with a list of RATIONAL objects as
input.} & Test that the setOunits method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setOunits method works with a mix of different shaped
RATIONAL objects as input.} & Test that the setOunits method works with an input of matrices and
vectors and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setOunits method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setOunits method can be
processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setOunits'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setOunits'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setOunits method can modify the input RATIONAL object.} & Test that the setOunits method can modify the input RATIONAL object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'ra3' and 'ain' are now different.
2) Check that 'ain' has the correct ounits field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setOunits method can set the property with a plist.} & Test that the setOunits method can modify the property 'ounits'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct ounits field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setOunits method pass back the output objects to a list
of output variables or to a single variable.} & Call the method with a list of output variables and with a single
output variable. Additionaly check that the rebuild method works on
the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for rational/setOunits.}
\label{tab:rational_setOunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the string method works with a vector of RATIONAL objects as
input.} & Test that the string method works for a vector of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the string method works with a matrix of RATIONAL objects as
input.} & Test that the string method works for a matrix of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the string method works with a list of RATIONAL objects as
input.} & Test that the string method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the string method works with a mix of different shaped
RATIONAL objects as input.} & Test that the string method works with an input of matrices and
vectors and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the string method properly applies history.} & The method string doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the string method doesn't work if the RATIONAL object have
more than one history step.} & The method string throws an error because the input object have more
than one history step. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for rational/string.}
\label{tab:rational_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf rational/type} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the type method works with a vector of RATIONAL objects as
input.} & Test that the type method works for a vector of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the type method works with a matrix of RATIONAL objects as
input.} & Test that the type method works for a matrix of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the type method works with a list of RATIONAL objects as
input.} & Test that the type method works for a list of RATIONAL objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the type method works with a mix of different shaped RATIONAL
objects as input.} & Test that the type method works with an input of matrices and vectors
and single RATIONAL objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the type method properly applies history.} & The method type doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for rational/type.}
\label{tab:rational_type}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/addAliases} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/addAliases] method works for a list of objects as input.} & Tests that the [smodel/addAliases] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/addAliases] method properly applies history.} & Test that the result of applying the [smodel/addAliases] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/addAliases]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/addAliases] method can modify the input AO.} & Test that the [smodel/addAliases] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/addAliases] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/addAliases.}
\label{tab:smodel_addAliases}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/addParameters} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works with any shape of objects as input.} & Test that the [smodel/addParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works with any shape of objects as input.} & Test that the [smodel/addParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works with any shape of objects as input.} & Test that the [smodel/addParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works with any shape of objects as input.} & Test that the [smodel/addParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works with any shape of objects as input.} & Test that the [smodel/addParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works with any shape of objects as input.} & Test that the [smodel/addParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works with any shape of objects as input.} & Test that the [smodel/addParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works with any shape of objects as input.} & Test that the [smodel/addParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method can modify the input AO.} & Test that the [smodel/addParameters] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/addParameters] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method works for a list of objects as input.} & Tests that the [smodel/addParameters] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/addParameters] method properly applies history.} & Test that the result of applying the [smodel/addParameters] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/addParameters]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
\caption{Unit tests for smodel/addParameters.}
\label{tab:smodel_addParameters}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/clearAliases} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/clearAliases] method works with any shape of objects as input.} & Test that the [smodel/clearAliases] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/clearAliases] method works for a list of objects as input.} & Tests that the [smodel/clearAliases] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/clearAliases] method properly applies history.} & Test that the result of applying the [smodel/clearAliases] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/clearAliases]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/clearAliases] method can modify the input AO.} & Test that the [smodel/clearAliases] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/clearAliases] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/clearAliases.}
\label{tab:smodel_clearAliases}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for smodel/copy.}
\label{tab:smodel_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for smodel/loadobj.}
\label{tab:smodel_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setAliases} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setAliases] method works for a list of objects as input.} & Tests that the [smodel/setAliases] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setAliases] method properly applies history.} & Test that the result of applying the [smodel/setAliases] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setAliases]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setAliases] method can modify the input AO.} & Test that the [smodel/setAliases] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setAliases] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/setAliases.}
\label{tab:smodel_setAliases}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setParameters} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works with any shape of objects as input.} & Test that the [smodel/setParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works with any shape of objects as input.} & Test that the [smodel/setParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works with any shape of objects as input.} & Test that the [smodel/setParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works with any shape of objects as input.} & Test that the [smodel/setParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works with any shape of objects as input.} & Test that the [smodel/setParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works with any shape of objects as input.} & Test that the [smodel/setParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works with any shape of objects as input.} & Test that the [smodel/setParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works with any shape of objects as input.} & Test that the [smodel/setParameters] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method can modify the input AO.} & Test that the [smodel/setParameters] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setParameters] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method works for a list of objects as input.} & Tests that the [smodel/setParameters] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setParameters] method properly applies history.} & Test that the result of applying the [smodel/setParameters] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setParameters]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
\caption{Unit tests for smodel/setParameters.}
\label{tab:smodel_setParameters}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setParams} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works with any shape of objects as input.} & Test that the [smodel/setParams] method works for any shape of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data.
3) Rebuild the object & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method works for a list of objects as input.} & Tests that the [smodel/setParams] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method properly applies history.} & Test that the result of applying the [smodel/setParams] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setParams]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setParams] method can modify the input AO.} & Test that the [smodel/setParams] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setParams] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/setParams.}
\label{tab:smodel_setParams}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setTrans} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setTrans] method works for a list of objects as input.} & Tests that the [smodel/setTrans] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setTrans] method works for a list of objects as input.} & Tests that the [smodel/setTrans] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setTrans] method properly applies history.} & Test that the result of applying the [smodel/setTrans] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setTrans]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setTrans] method can modify the input AO.} & Test that the [smodel/setTrans] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setTrans] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/setTrans.}
\label{tab:smodel_setTrans}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setValues} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setValues] method works for a list of objects as input.} & Tests that the [smodel/setValues] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setValues] method works for a list of objects as input.} & Tests that the [smodel/setValues] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setValues] method properly applies history.} & Test that the result of applying the [smodel/setValues] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setValues]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setValues] method can modify the input AO.} & Test that the [smodel/setValues] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setValues] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/setValues.}
\label{tab:smodel_setValues}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setXunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setXunits] method works for a list of objects as input.} & Tests that the [smodel/setXunits] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setXunits] method works for a list of objects as input.} & Tests that the [smodel/setXunits] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setXunits] method properly applies history.} & Test that the result of applying the [smodel/setXunits] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setXunits]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setXunits] method can modify the input AO.} & Test that the [smodel/setXunits] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setXunits] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/setXunits.}
\label{tab:smodel_setXunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setXvals} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setXvals] method works for a list of objects as input.} & Tests that the [smodel/setXvals] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setXvals] method works for a list of objects as input.} & Tests that the [smodel/setXvals] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setXvals] method properly applies history.} & Test that the result of applying the [smodel/setXvals] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setXvals]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setXvals] method can modify the input AO.} & Test that the [smodel/setXvals] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setXvals] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/setXvals.}
\label{tab:smodel_setXvals}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setXvar} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setXvar] method works for a list of objects as input.} & Tests that the [smodel/setXvar] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setXvar] method works for a list of objects as input.} & Tests that the [smodel/setXvar] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setXvar] method properly applies history.} & Test that the result of applying the [smodel/setXvar] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setXvar]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setXvar] method can modify the input AO.} & Test that the [smodel/setXvar] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setXvar] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/setXvar.}
\label{tab:smodel_setXvar}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/setYunits} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{minfo } & \multirow{2}{5cm}{Tests that the getInfo call works for this a general setter method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericAnyShape } & \multirow{2}{5cm}{} &  & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setYunits] method works for a list of objects as input.} & Tests that the [smodel/setYunits] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericList } & \multirow{2}{5cm}{Tests that the [smodel/setYunits] method works for a list of objects as input.} & Tests that the [smodel/setYunits] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'objs'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{genericHistory } & \multirow{2}{5cm}{Tests that the [smodel/setYunits] method properly applies history.} & Test that the result of applying the [smodel/setYunits] method can be processed
back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/setYunits]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{genericModify } & \multirow{2}{5cm}{Tests that the [smodel/setYunits] method can modify the input AO.} & Test that the [smodel/setYunits] method can modify the input object by calling
with no output and that the method doesn't change the input of the
function notation (with a equal sign). & pass \\ \cline{3-4}
        &    & 1) Check that the modified input is changed by the method
2) Check that 'out' and 'obj\_eq' are now different.
3) Check that 'obj\_eq' is not changed
4) Check that out and amodi are the same & pass \\ \hline
 \multirow{2}{3cm}{genericOutput } & \multirow{2}{5cm}{Check that the [smodel/setYunits] method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/setYunits.}
\label{tab:smodel_setYunits}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf smodel/smodel} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [smodel/smodel] method works with a vector of objects as input.} & Test that the [smodel/smodel] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [smodel/smodel] method works with a matrix of objects as input.} & Test that the [smodel/smodel] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [smodel/smodel] method works with a list of objects as input.} & Test that the [smodel/smodel] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [smodel/smodel] method works with a mix of different arrays of objects as input.} & Tests that the [smodel/smodel] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [smodel/smodel] method properly applies history.} & Test that the result of applying the [smodel/smodel] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[smodel/smodel]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the smodel can read older MAT files which have different
values in 'xvals'} & Tests that the smodel can read older MAT files which have different
values in 'xvals'
The smodel object was created with the commands:
s = smodel('A.*(t >= toff)');
s.setXvar('t');
s.setParams({'A','toff'}, {5,300});
s.setName('Step at toff');
s.setDescription('Step function of amplitude A at time toff');
s.setXunits('Hz\^1/2 km\^2');
s.setYunits('s\^2 m\^-1');
s.setXvals(1:1e3);
s.setAliasNames('a');
s.setAliasValues(8); & pass \\ \cline{3-4}
        &    & 1) Check that the objects are quite the same
2) Check that 'xvals' is a cell-array with the numbers from 1 to 1000 & pass \\ \hline
 \multirow{2}{3cm}{60 } & \multirow{2}{5cm}{Tests that the constructor method doesn't apply history to the read
MAT-file constructor.} & Tests that the constructor method doesn't apply history to the read
MAT-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{61 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the read
XML-file constructor.} & Tests that the constructor properly applies history to the read
XML-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{62 } & \multirow{2}{5cm}{Tests that the constructor properly applies history in the struct constructor.} & Tests that the constructor properly applies history in the struct constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{64 } & \multirow{2}{5cm}{Tests that the contructor properly applies history to the
plist(filename) constructor.} & Tests that the contructor properly applies history to the
plist(filename) constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{65 } & \multirow{2}{5cm}{Tests that the contructed object can be submitted and retrieved.} & Tests that the contructed object can be submitted and retrieved. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{68 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the conn+Id constructor.} & Tests that the constructor properly applies history to the conn+Id
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for smodel/smodel.}
\label{tab:smodel_smodel}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ssm/addParameters} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ssm/addParameters] method works with a vector of objects as input.} & Test that the [ssm/addParameters] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ssm/addParameters] method works with a matrix of objects as input.} & Test that the [ssm/addParameters] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ssm/addParameters] method works with a list of objects as input.} & Test that the [ssm/addParameters] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ssm/addParameters] method works with a list of objects as input.} & Test that the [ssm/addParameters] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ssm/addParameters] method works with a mix of different arrays of objects as input.} & Tests that the [ssm/addParameters] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ssm/addParameters] method properly applies history.} & Test that the result of applying the [ssm/addParameters] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ssm/addParameters]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
\caption{Unit tests for ssm/addParameters.}
\label{tab:ssm_addParameters}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ssm/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for ssm/copy.}
\label{tab:ssm_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ssm/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for ssm/loadobj.}
\label{tab:ssm_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf model/DFACS} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests that the model <MODEL> has a meaningful name.} & Test that the model <MODEL> has a meaningful name. & pass \\ \cline{3-4}
        &    & 1) Check that the name of the object is not empty and not equal to 'none' & pass \\ \hline
 \multirow{2}{3cm}{902 } & \multirow{2}{5cm}{Tests that the model <MODEL> has a meaningful description.} & Test that the model <MODEL> has a meaningful description. & pass \\ \cline{3-4}
        &    & 1) Check that the description of the object is not empty and not equal to 'none' & pass \\ \hline
 \multirow{2}{3cm}{903 } & \multirow{2}{5cm}{Tests that the model <MODEL> responds to 'DIM' configuration key.} & Test that the model <MODEL> responds to 'DIM' configuration key. & pass \\ \cline{3-4}
        &    & 1) Check that the model builds with DIM==1
2) Check that the model builds with DIM==2
3) Check that the model builds with DIM==3
4) Check that the 3 models are different & pass \\ \hline
\caption{Unit tests for model/DFACS.}
\label{tab:model_DFACS}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf model/IFO} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests that the model <MODEL> has a meaningful name.} & Test that the model <MODEL> has a meaningful name. & pass \\ \cline{3-4}
        &    & 1) Check that the name of the object is not empty and not equal to 'none' & pass \\ \hline
 \multirow{2}{3cm}{902 } & \multirow{2}{5cm}{Tests that the model <MODEL> has a meaningful description.} & Test that the model <MODEL> has a meaningful description. & pass \\ \cline{3-4}
        &    & 1) Check that the description of the object is not empty and not equal to 'none' & pass \\ \hline
 \multirow{2}{3cm}{903 } & \multirow{2}{5cm}{Tests that the model <MODEL> responds to 'DIM' configuration key.} & Test that the model <MODEL> responds to 'DIM' configuration key. & pass \\ \cline{3-4}
        &    & 1) Check that the model builds with DIM==1
2) Check that the model builds with DIM==2
3) Check that the model builds with DIM==3
4) Check that the 3 models are different & pass \\ \hline
\caption{Unit tests for model/IFO.}
\label{tab:model_IFO}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf ssm/ssm} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the [ssm/ssm] method works with a vector of objects as input.} & Test that the [ssm/ssm] method works for a vector of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'vec'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the [ssm/ssm] method works with a matrix of objects as input.} & Test that the [ssm/ssm] method works for a matrix of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the [ssm/ssm] method works with a list of objects as input.} & Test that the [ssm/ssm] method works for a list of objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the [ssm/ssm] method works with a mix of different arrays of objects as input.} & Tests that the [ssm/ssm] method works with a mix of different arrays of
objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'mat'
2) Check that each output object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the [ssm/ssm] method properly applies history.} & Test that the result of applying the [ssm/ssm] method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'[ssm/ssm]'.
2) Check that the re-built object is the same object as the input. & pass \\ \hline
 \multirow{2}{3cm}{60 } & \multirow{2}{5cm}{Tests that the constructor method doesn't apply history to the read
MAT-file constructor.} & Tests that the constructor method doesn't apply history to the read
MAT-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{61 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the read
XML-file constructor.} & Tests that the constructor properly applies history to the read
XML-file constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the history is the same as the history of the saved
object. Because save and load shouldn't add a history step.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{62 } & \multirow{2}{5cm}{Tests that the constructor properly applies history in the struct constructor.} & Tests that the constructor properly applies history in the struct constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{63 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the pzmodel constructor.} & Tests that the constructor properly applies history to the pzmodel constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{64 } & \multirow{2}{5cm}{Tests that the contructor properly applies history to the
plist(filename) constructor.} & Tests that the contructor properly applies history to the
plist(filename) constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{65 } & \multirow{2}{5cm}{Tests that the contructed object can be submitted and retrieved.} & Tests that the contructed object can be submitted and retrieved. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
the class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{66 } & \multirow{2}{5cm}{Tests that the construuctor properly works with the plist(pzmodel)
constructor.} & Tests that the constructor properly works with the plist(pzmodel)
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'ssm'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{67 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the
pole/zero model + plist object constructor.} & Tests that the constructor properly applies history to the
pole/zero model + plist object constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{68 } & \multirow{2}{5cm}{Tests that the constructor properly applies history to the conn+Id constructor.} & Tests that the constructor properly applies history to the conn+Id
constructor. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
class name.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for ssm/ssm.}
\label{tab:ssm_ssm}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/datenum} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests the 'datenum' method.} & Create a time object and use datenum to produce a serial date number. & pass \\ \cline{3-4}
        &    & Check that the returned value is the same as the one you get when
using time/format with the same format string when converted using
MATLAB's datestr() function. & pass \\ \hline
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests the 'datenum' method.} & Create a time object and use datenum to produce a serial date number. & pass \\ \cline{3-4}
        &    & Check that the returned value is the same as the one you get when
using time/format with the same format string when converted using
MATLAB's datestr() function. & pass \\ \hline
 \multirow{2}{3cm}{903 } & \multirow{2}{5cm}{Tests 'double' method.} & Set the time-zone to PST and create a time object and use datenum to
produce a serial date number. & pass \\ \cline{3-4}
        &    & Check that the returned value is the same as the one you get when
using time/format with the same format string when converted using
MATLAB's datestr() function. & pass \\ \hline
\caption{Unit tests for time/datenum.}
\label{tab:time_datenum}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/double} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests 'double' method.} & Use the double() method on single time objects and vectors of time
objects. & pass \\ \cline{3-4}
        &    & Check that double returns the expected numerical values for each
case. & pass \\ \hline
\caption{Unit tests for time/double.}
\label{tab:time_double}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/format} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests 'format' static method.} & Use the static format method to produce a number of time strings in
different formats and for different time-zones. & pass \\ \cline{3-4}
        &    & Check that the returned strings match the expected strings. & pass \\ \hline
\caption{Unit tests for time/format.}
\label{tab:time_format}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/minus} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests time object minus operator.} & Compute the difference between time objects and doubles. & pass \\ \cline{3-4}
        &    & Check the resulting time objects have the correct values. & pass \\ \hline
\caption{Unit tests for time/minus.}
\label{tab:time_minus}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/parse} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests 'parse' static method with time string only.} & Use parse() to parse different time strings with different time-zones
set. & pass \\ \cline{3-4}
        &    & Check the resulting millsecond values are the expected ones. & pass \\ \hline
 \multirow{2}{3cm}{902 } & \multirow{2}{5cm}{Tests 'parse' static method with time and format strings.} & Use parse() to parse different time strings with different time-zones
set. The time-string format is specified as a second input argument. & pass \\ \cline{3-4}
        &    & Check the resulting millsecond values are the expected ones. & pass \\ \hline
 \multirow{2}{3cm}{903 } & \multirow{2}{5cm}{Tests 'parse' static method with time string and numeric format.} & Use parse() to parse different time strings using the supported
MATLAB numeric time formats. & pass \\ \cline{3-4}
        &    & Check the resulting millsecond values against the result of parsing
a time string. (See time/parse utp\_902.) & pass \\ \hline
 \multirow{2}{3cm}{904 } & \multirow{2}{5cm}{Tests 'parse' static method with time string containing timezone information.} & Use parse() to parse different time strings which contain the
time-zone. & pass \\ \cline{3-4}
        &    & Check the resulting millisecond value is the expected one. & pass \\ \hline
 \multirow{2}{3cm}{905 } & \multirow{2}{5cm}{Tests 'parse' static method with time string and timezone specification.} & Use parse() to parse different time strings when passing the
time-zone as the third argument. The second argument (the format) is
left empty. & pass \\ \cline{3-4}
        &    & Check the resulting millisecond value is the expected one. & pass \\ \hline
\caption{Unit tests for time/parse.}
\label{tab:time_parse}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/plus} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{101 } & \multirow{2}{5cm}{Tests time object plus operator.} & Compute the sum of time objects and doubles. & pass \\ \cline{3-4}
        &    & Check the resulting time objects have the correct values. & pass \\ \hline
\caption{Unit tests for time/plus.}
\label{tab:time_plus}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests that the output of the 'string' method can be used to recreate the time object.} & Use string to convert a time object to a string. Use eval on the
result to recreate a time object. & pass \\ \cline{3-4}
        &    & Check the recreated time object matches the original. & pass \\ \hline
\caption{Unit tests for time/string.}
\label{tab:time_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/time} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests time object constructor without arguments. Should return the current time.} & Call the time() constructor with no inputs. & pass \\ \cline{3-4}
        &    & No test can be done here since we don't know the time when the
constructor is called. We could check that the resulting time is >
0, but that's not so useful. & pass \\ \hline
 \multirow{2}{3cm}{902 } & \multirow{2}{5cm}{Tests time object constructor from numeric value.} & Call the time() constructor with a numeric input (number of seconds
since epoch). & pass \\ \cline{3-4}
        &    & Check the time object has the expected millisecond value. & pass \\ \hline
 \multirow{2}{3cm}{903 } & \multirow{2}{5cm}{Tests time object constructor from string.} & Call the time() constructor with different time-string inputs. & pass \\ \cline{3-4}
        &    & Check the time objects have the expected millisecond values. & pass \\ \hline
 \multirow{2}{3cm}{904 } & \multirow{2}{5cm}{Tests time object constructor from a cell array of strings.} & Call the time() constructor with cell-array of time-strings. & pass \\ \cline{3-4}
        &    & Check the time objects have the expected millisecond values. & pass \\ \hline
 \multirow{2}{3cm}{905 } & \multirow{2}{5cm}{Tests time object constructor from plist with 'time' parameter.} & Call the time() constructor with plist input. Check a plist with a
numeric value and a plist with a time-string. & pass \\ \cline{3-4}
        &    & Check the time objects have the expected millisecond values. & pass \\ \hline
 \multirow{2}{3cm}{906 } & \multirow{2}{5cm}{Tests time object constructor from plist with 'milliseconds' parameter} & Call the time() constructor with plist input using the 'millisecond'
key. & pass \\ \cline{3-4}
        &    & Check the time object has the expected millisecond value. & pass \\ \hline
 \multirow{2}{3cm}{907 } & \multirow{2}{5cm}{Tests time object constructor from plist with more parameters.} & Call the time() constructor with plist input containing the time
string and the time-zone.
key. & pass \\ \cline{3-4}
        &    & Check the time objects have the expected millisecond values. & pass \\ \hline
 \multirow{2}{3cm}{908 } & \multirow{2}{5cm}{Tests time object constructor from structure.} & Call the time() constructor with an input structure obtained from
calling struct() on a time object.
key. & pass \\ \cline{3-4}
        &    & Check the original and reconstructed time objects have the same
millisecond value. & pass \\ \hline
 \multirow{2}{3cm}{909 } & \multirow{2}{5cm}{Tests time object constructor from string and time format.} & Call the time() constructor with an input time string and time format
string. & pass \\ \cline{3-4}
        &    & Check the resulting time object has the expected millisecond value. & pass \\ \hline
\caption{Unit tests for time/time.}
\label{tab:time_time}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/timeformat} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests that the method really returns what is in the user preferences.} & Check that the timeformat method runs without error. & pass \\ \cline{3-4}
        &    & Check that the returned value is the same as the one set in the
user preferences. & pass \\ \hline
 \multirow{2}{3cm}{902 } & \multirow{2}{5cm}{Change user preferences and do it again.} & Set the time string format in the preferences and check that the
timeformat method runs without error. & pass \\ \cline{3-4}
        &    & Check that the returned value is the same as the one set in the
user preferences. & pass \\ \hline
 \multirow{2}{3cm}{903 } & \multirow{2}{5cm}{Change user preferences and do it again.} & Set the time string format in the preferences and check that the
timeformat method runs without error. & pass \\ \cline{3-4}
        &    & Check that the returned value is the same as the one set in the
user preferences. & pass \\ \hline
\caption{Unit tests for time/timeformat.}
\label{tab:time_timeformat}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf time/timezone} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{901 } & \multirow{2}{5cm}{Tests that the method really returns what is in the user preferences.} & Call the static timezone method. & pass \\ \cline{3-4}
        &    & Check the resulting timezone object against the one in the user
preferences. & pass \\ \hline
 \multirow{2}{3cm}{902 } & \multirow{2}{5cm}{Change user preferences and do it again.} & Set the timezone in the preferences then call the static timezone method. & pass \\ \cline{3-4}
        &    & Check the resulting timezone object against the one in the user
preferences. & pass \\ \hline
 \multirow{2}{3cm}{903 } & \multirow{2}{5cm}{Change user preferences and do it again.} & Set the timezone in the preferences then call the static timezone method. & pass \\ \cline{3-4}
        &    & Check the resulting timezone object against the one in the user
preferences. & pass \\ \hline
\caption{Unit tests for time/timezone.}
\label{tab:time_timezone}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/char} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the char method works with a vector of TIMESPAN objects as input.} & Test that the char method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each start time & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the char method works with a matrix of TIMESPAN objects as input.} & Test that the char method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each start time & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the char method works with a list of TIMESPAN objects as input.} & Test that the char method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each start time & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the char method works with a mix of different shaped TIMESPAN objects
as input.} & Test that the char method works with an input of matrices and vectors
and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each start time & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the char method properly applies history.} & The method char doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for timespan/char.}
\label{tab:timespan_char}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/copy} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
 \multirow{2}{3cm}{69 } & \multirow{2}{5cm}{Tests that the copy method works with a single object as an input.} & Test the positive (copy-case) and the negative (non copy-case) case. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a 'real' copy or only a copy of the handle & pass \\ \hline
\caption{Unit tests for timespan/copy.}
\label{tab:timespan_copy}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/created} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the created method works with a vector of TIMESPAN objects as
input.} & Test that the created method works for a vector of TIMESPAN objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the created method works with a matrix of TIMESPAN objects as
input.} & Test that the created method works for a matrix of TIMESPAN objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the created method works with a list of TIMESPAN objects as
input.} & Test that the created method works for a list of TIMESPAN objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the created method works with a mix of different shaped
TIMESPAN objects as input.} & Test that the created method works with an input of matrices and
vectors and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the created method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the created method can be used with the modify command.} & Tests that the created method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the created method retruns always a well defined time object
even for an empty input object.} & Test that the created method with an empty 'TIMESPAN object & pass \\ \cline{3-4}
        &    & 1) Check that the output is a time object with a ell defined time. & pass \\ \hline
\caption{Unit tests for timespan/created.}
\label{tab:timespan_created}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/creator} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the creator method works with a vector of TIMESPAN objects as
input.} & Test that the creator method works for a vector of TIMESPAN objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the creator method works with a matrix of TIMESPAN objects as
input.} & Test that the creator method works for a matrix of TIMESPAN objects as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the creator method works with a list of TIMESPAN objects as
input.} & The creator method doesn't work for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the creator method works with a mix of different shaped
TIMESPAN objects as input.} & The creator method doesn't work with different shaped input objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the creator method properly applies history} & This method doesn't change the input object, thus no history is added
to the object. & pass \\ \cline{3-4}
        &    & 1) Nothing to check. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the creator method can be used with the modify command.} & Tests that the creator method can be used with the modify command. & pass \\ \cline{3-4}
        &    & 1) Check the single object
2) Check the matrix object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the creator method retruns all creator(s)/modifier(s) which
are in the history.} & Test that the creator method uses the option 'all' direct or in a
plist. The test file must have the modifier 'first', 'second' and
'third' & pass \\ \cline{3-4}
        &    & 1) Check that out1 contains only one creator
2) Check that out2 contain more creator/modifier & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests the negative case for the option 'all'.} & Test that the creator method throws an error if the option 'all' is
used in connection with a matrix/vector of TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
\caption{Unit tests for timespan/creator.}
\label{tab:timespan_creator}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/display} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the display method works with a vector of TIMESPAN objects as input.} & Test that the display method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the display method works with a matrix of TIMESPAN objects as input.} & Test that the display method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the display method works with a list of TIMESPAN objects as input.} & Test that the display method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the display method works with a mix of different shaped
TIMESPAN objects as input.} & Test that the display method works with an input of matrices and vectors
and single TIMESPAN objects as. & pass \\ \cline{3-4}
        &    & 1) Check that the output contain at least each object name & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the display method properly applies history.} & The method display doesn't change the data, thus it is not possible to
check the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for timespan/display.}
\label{tab:timespan_display}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/eq} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the eq method works with a vector of TIMESPAN objects as input.} & Test that the eq method works for a vector of TIMESPAN objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the eq method works with a matrix of TIMESPAN objects as input.} & Test that the eq method works for a matrix of TIMESPAN objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the eq function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the eq method works with a list of TIMESPAN objects as input.} & The eq method doesn't works for a list of TIMESPAN objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the eq method works with a mix of different shaped TIMESPAN objects
as input.} & The eq method doesn't works for a list of TIMESPAN objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the eq method properly applies history.} & The eq method doesn't change the TIMESPAN object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because ts is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'endt'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because ts is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Test the eq method with an exception list.
With the LTPDA toolbox 2.0 it is only possible to test the exception list
with properties where a public set method exist.} & Test the eq method with the exception 'startT'. Use the option 'internal'
to suppress the history. It is necessary to add 'created' to the exception
list because ts is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Test the eq method with an exception list which is in a plist.} & Test that the eq method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output. & pass \\ \hline
\caption{Unit tests for timespan/eq.}
\label{tab:timespan_eq}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/get} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests the get method of the timespan class.} & Test that the get returns returns the value of the specified
property. Do this for all properties of the TIMESPAN object. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the get method works with a plist.} & Test that the get returns returns the value of the specified
property which is defined in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the correct value of the output & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests the get method of the timespan class.} & Test that the get throws an error if the input are more than
one TIMESPAN object. & pass \\ \cline{3-4}
        &    & 1) Nothing to test & pass \\ \hline
\caption{Unit tests for timespan/get.}
\label{tab:timespan_get}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/index} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the index method works with a vector of TIMESPAN objects as
input.} & Test that the index method works for a vector of TIMESPAN objects as
input. The following indexing should work:
I = [ 1 2 3 ] or (I/J) = [(1,1), (1,2), (1,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the index method works with a matrix of TIMESPAN objects as
input.} & Test that the index method works for a matrix of TIMESPAN objects as
input. The following indexing should work:
I = [ 1 3 5 ] or (I/J) = [(1,1), (1,2), (1,3)]
[ 2 4 6 ]            [(2,1), (2,2), (2,3)] & pass \\ \cline{3-4}
        &    & 1) Check that the index method selects the correct object. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the index method works with a list of TIMESPAN objects as
input.} & The index method doesn't work for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Nothing to test. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the index method properly applies history.} & Test that the result of index have an additional history step. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds
to 'index'. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the index method works for the modifier command.} & Tests that the index method works for the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the index method can be controled with a plist. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test that the index method selects more objects if I have more indices.} & Test that the index method selects more objects if I have more indices. & pass \\ \cline{3-4}
        &    & 1) Check that the history-plist contains the used indices.
2) Check that the index method selects the correct object & pass \\ \hline
\caption{Unit tests for timespan/index.}
\label{tab:timespan_index}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/isprop} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the isprop method works with a vector of TIMESPAN objects as input.} & Test that the isprop method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the isprop method works with a matrix of TIMESPAN objects as input.} & Test that the isprop method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the isprop method works with a list of TIMESPAN objects as input.} & Test that the isprop method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the isprop method works with a mix of different shaped
TIMESPAN objects as input.} & Test that the isprop method works with an input of matrices and vectors
and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the isprop method properly applies history.} & The method isprop doesn't change the object, thus it is not necessary to
apply history. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the isprop method works for each property.} & Test that the isprop method works for the properties:
startT', 'endT', 'timeformat', 'timezone', 'interval'
'hist' and 'name' & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the negative case and the not function command.} & Test that the isprop method retrun false for a unknown property and for
methods of the object. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for timespan/isprop.}
\label{tab:timespan_isprop}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/loadobj} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check the shape of the loaded objects. & pass \\ \hline
\caption{Unit tests for timespan/loadobj.}
\label{tab:timespan_loadobj}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/ne} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the ne method works with a vector of TIMESPAN objects as input.} & Test that the ne method works for a vector of TIMESPAN objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the ne method works with a matrix of TIMESPAN objects as input.} & Test that the ne method works for a matrix of TIMESPAN objects as input.
Test the positive and the negative case. & pass \\ \cline{3-4}
        &    & 1) Check the output of the ne function. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the ne method works with a list of TIMESPAN objects as input.} & The ne method doesn't works for a list of TIMESPAN objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the ne method works with a mix of different shaped TIMESPAN objects
as input.} & The ne method doesn't works for a list of TIMESPAN objects as input.
Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the ne method properly applies history.} & The ne method doesn't change the TIMESPAN object, thus will no history added.
Nothing to do & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Test the ne method with an exception list.
The function timespan/ne use the function timespan/eq so it is not
necessary to check all possibilities of the exception list.} & Test the ne method with the exception 'name'. Use the option 'internal' to
suppress the history. It is necessary to add 'created' to the exception
list because ts is created at an other time. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Test the ne method with an exception list which is in a plist.} & Test that the ne method uses the exception list in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that each output contains the correct data. & pass \\ \hline
\caption{Unit tests for timespan/ne.}
\label{tab:timespan_ne}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/rebuild} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the rebuild method works with a vector of TIMESPAN objects as input.} & Test that the rebuild method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the rebuild method works with a matrix of TIMESPAN objects as input.} & Test that the rebuild method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the rebuild method works with a list of TIMESPAN objects as input.} & Test that the rebuild method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the rebuild method works with a mix of different shaped TIMESPAN objects
as input.} & Test that the rebuild method works with an input of matrices and vectors
and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the rebuild method properly applies history.} & The method rebuild doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Check that the rebuild method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for timespan/rebuild.}
\label{tab:timespan_rebuild}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/save} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the save method works with a vector of TIMESPAN objects as input.} & Test that the save method works for a vector of TIMESPAN objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'tsv'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the save method works with a matrix of TIMESPAN objects as input.} & Test that the save method works for a matrix of TIMESPAN objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in 'tsm'
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the save method works with a list of TIMESPAN objects as input.} & Test that the save method works for a list of TIMESPAN objects as input.
Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out1' and 'out2' are the same
as in the list
2) Check that the loaded objects are the same as the saved objects.
3) The outputs 'out1' and 'out2' must be the same except. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the save method works with a mix of different shaped TIMESPAN objects
as input.} & Test that the save method works with an input of matrices and vectors
and single TIMESPAN objects. Test both formats 'xml' and 'mat'. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output TIMESPAN object contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the save method properly applies history.} & Test that the result of applying the save method can be processed back
to an m-file. Do this for both extensions 'mat' and 'xml' & pass \\ \cline{3-4}
        &    & 1) Check that the history applies to the output object. Check that
save doesn't add a history step to the input object.
2) Check that the read object doesn't contain the save + load history steps.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the save method works with the modify command.} & Use the save method with the modifier command. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't apply the history.
2) Check the output against the input.
3) Check the history of the output against the input. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Control the method with a plist.} & Test that the save method uses the filename which is stored in a plist. & pass \\ \cline{3-4}
        &    & 1) Check the output & pass \\ \hline
\caption{Unit tests for timespan/save.}
\label{tab:timespan_save}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/setEndT} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setEndT method works with a vector of TIMESPAN objects as input.} & Test that the setEndT method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setEndT method works with a matrix of TIMESPAN objects as input.} & Test that the setEndT method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setEndT method works with a list of TIMESPAN objects as input.} & Test that the setEndT method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setEndT method works with a mix of different shaped TIMESPAN
objects as input.} & Test that the setEndT method works with an input of matrices and vectors
and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setEndT method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setEndT method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setEndT'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setEndT'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setEndT method can modify the input TIMESPAN object.} & Test that the setEndT method can modify the input TIMESPAN object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'ts5' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setEndT method can set the property with a plist.} & Test that the setEndT method can modify the property 'endT'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setEndT method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the setEndT method accept different inputs.} & Test that the setEndT method accept input of double, char and
time-objects. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for timespan/setEndT.}
\label{tab:timespan_setEndT}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/setName} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setName method works with a vector of TIMESPAN objects as input.} & Test that the setName method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setName method works with a matrix of TIMESPAN objects as input.} & Test that the setName method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setName method works with a list of TIMESPAN objects as input.} & Test that the setName method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setName method works with a mix of different shaped TIMESPAN
objects as input.} & Test that the setName method works with an input of matrices and vectors
and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setName method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setName method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setName'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setName'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setName method can modify the input TIMESPAN object.} & Test that the setName method can modify the input TIMESPAN object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'ts5' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setName method can set the property with a plist.} & Test that the setName method can modify the property 'name'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setName method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for timespan/setName.}
\label{tab:timespan_setName}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/setStartT} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the setStartT method works with a vector of TIMESPAN objects as input.} & Test that the setStartT method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsv'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the setStartT method works with a matrix of TIMESPAN objects as input.} & Test that the setStartT method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in 'tsm'
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the setStartT method works with a list of TIMESPAN objects as input.} & Test that the setStartT method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the setStartT method works with a mix of different shaped TIMESPAN
objects as input.} & Test that the setStartT method works with an input of matrices and vectors
and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same as in
input.
2) Check that each output contains the correct data. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the setStartT method properly applies history and that the
option 'internal' suppresses the history.} & Test that the result of applying the setStartT method can be processed back
to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out1' corresponds to
'setStartT'.
2) Check that the last entry in the history of 'out2' NOT corresponds to
'setStartT'.
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the setStartT method can modify the input TIMESPAN object.} & Test that the setStartT method can modify the input TIMESPAN object
by calling with no output. & pass \\ \cline{3-4}
        &    & 1) Check that 'ts5' and 'ain' are now different.
2) Check that 'ain' has the correct name field & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the setStartT method can set the property with a plist.} & Test that the setStartT method can modify the property 'startT'
with a value in a plist. & pass \\ \cline{3-4}
        &    & 1) Check that 'ain' has the correct name field
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Check that the setStartT method pass back the output objects to a list of
output variables or to a single variable.} & Call the method with a list of output variables and with a single output
variable. Additionaly check that the rebuild method works on the output. & pass \\ \cline{3-4}
        &    & 1) Check that the output contains the right number of objects
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Check that the setStartT method accept different inputs.} & Test that the setStartT method accept input of double, char and
time-objects. & pass \\ \cline{3-4}
        &    & 1) Check the output
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for timespan/setStartT.}
\label{tab:timespan_setStartT}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/string} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the string method works with a vector of TIMESPAN objects as input.} & Test that the string method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the string method works with a matrix of TIMESPAN objects as input.} & Test that the string method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the string method works with a list of TIMESPAN objects as input.} & Test that the string method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the string method works with a mix of different shaped TIMESPAN objects
as input.} & Test that the string method works with an input of matrices and vectors
and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check that the output is a executable string.
2) Check the correct number of rout
3) Check the rebuild objects. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the string method properly applies history.} & The method string doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the string method doesn't work if the TIMESPAN object have more
than one history step.} & The method string throws an error because the input object have more than
one history step. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for timespan/string.}
\label{tab:timespan_string}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/timespan} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{00 } & \multirow{2}{5cm}{Tests that the timespan constructor does what is supposed to do.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the timespan method works with a vector of TIMESPAN objects as input.} & Test that the timespan method works with a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output TIMESPANs is the same as the input shape.
2) Check that each output TIMESPAN is a copy of the input TIMESPAN.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the timespan method works with a matrix of TIMESPAN objects as input.} & Test that the timespan method works with a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the shape of the output TIMESPANs is the same as the input shape.
2) Check that each output TIMESPAN is a copy of the input TIMESPAN.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the timespan method works with a list of TIMESPAN objects as input.} & Test that the timespan method works with a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output TIMESPAN is a copy of the input TIMESPAN.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the timespan method works with a mix of different shaped TIMESPANs as
input.} & Test that the timespan method works with a mix of different shaped TIMESPANs as
input. & pass \\ \cline{3-4}
        &    & 1) Check that the number of elements in 'out' is the same of the
number in the input.
2) Check that each output TIMESPAN is a copy of the input TIMESPAN.
3) Check that the copy have an additional history step. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the timespan method properly applies history.} & Test that the result of applying the timespan method can be processed back. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'timespan'.
2) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{07 } & \multirow{2}{5cm}{Tests that the timespan method properly applies history to the copy constructor.} & Test that the output can be processed back with the 'rebuild' method.
Test the constructor with a different number of inputs. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'timespan'.
2) Check that the original objects are not changed by the setter function
3) Check that the method rebuild produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{08 } & \multirow{2}{5cm}{Tests that the timespan method properly applies history to the read
MAT-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{09 } & \multirow{2}{5cm}{Tests that the timespan method properly applies history to the read
XML-file constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{10 } & \multirow{2}{5cm}{Tests that the timespan method properly applies history to the struct constructor.} & Test that the output can be processed back with the 'rebuild' method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out'
corresponds to 'timespan'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{11 } & \multirow{2}{5cm}{Tests that the timespan method properly applies history to the
plist(filename) constructor.} & Test that the output can be processed back to an m-file. & pass \\ \cline{3-4}
        &    & 1) Check that the save method doesn't change the input object
2) Check that the last two entries in the history of 'out' corresponds to
'timespan' and 'save'
3) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{12 } & \multirow{2}{5cm}{Tests that the TIMESPAN method properly applies history to the
plist(conn) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'timespan'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{13 } & \multirow{2}{5cm}{Tests that the TIMESPAN method properly applies history to the
plist(type) constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'timespan'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{15 } & \multirow{2}{5cm}{Tests that the TIMESPAN method properly applies history to
the start + end time constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'timespan'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{16 } & \multirow{2}{5cm}{Tests that the TIMESPAN method properly applies history to the conn+Id constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'timespan'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
 \multirow{2}{3cm}{17 } & \multirow{2}{5cm}{Tests that the TIMESPAN method properly applies history to
the start + end time + format constructor.} & Test that the output can be processed back with the rebuild method. & pass \\ \cline{3-4}
        &    & 1) Check that the last entry in the history of 'out' corresponds to
'timespan'.
2) Check that the 'rebuild' method produces the same object as 'out'. & pass \\ \hline
\caption{Unit tests for timespan/timespan.}
\label{tab:timespan_timespan}
\end{longtable}
\clearpage


\begin{longtable}{|p{3cm}|p{5cm}|p{5cm}|c|} \hline
{\bf timespan/type} &&& \\ \hline
\endhead
 \multirow{2}{3cm}{01 } & \multirow{2}{5cm}{Tests that the getInfo call works for this method.} & Test that the getInfo call works for no sets, all sets, and each set
individually. & pass \\ \cline{3-4}
        &    & 1) Check that getInfo call returned an minfo object in all cases.
2) Check that all plists have the correct parameters. & pass \\ \hline
 \multirow{2}{3cm}{02 } & \multirow{2}{5cm}{Tests that the type method works with a vector of TIMESPAN objects as input.} & Test that the type method works for a vector of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{03 } & \multirow{2}{5cm}{Tests that the type method works with a matrix of TIMESPAN objects as input.} & Test that the type method works for a matrix of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{04 } & \multirow{2}{5cm}{Tests that the type method works with a list of TIMESPAN objects as input.} & Test that the type method works for a list of TIMESPAN objects as input. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{05 } & \multirow{2}{5cm}{Tests that the type method works with a mix of different shaped TIMESPAN objects
as input.} & Test that the type method works with an input of matrices and vectors
and single TIMESPAN objects. & pass \\ \cline{3-4}
        &    & 1) Check the rebuilt output. & pass \\ \hline
 \multirow{2}{3cm}{06 } & \multirow{2}{5cm}{Tests that the type method properly applies history.} & The method type doesn't change the data, thus it is not possible to check
the history. Nothing to do. & pass \\ \cline{3-4}
        &    &  & pass \\ \hline
\caption{Unit tests for timespan/type.}
\label{tab:timespan_type}
\end{longtable}
\clearpage


